Urschel, Model Diversacut Sprint, Stainless steel, dicer, slicer, strip cutter with inclined feeder used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 16" x 17" product hopper with 61" high in feed, swing open locking access door with safety interrupt switch, crosscut and circular knifes that accept product up to 6½" in any dimension and 10" x 20" discharge chute with 15½" floor clearence. Control panel has start, stop and e-stop push button controls. Mounted on stainless steel (4) leg frame with locking casters.
OAD: 55"L x 55"W x 65"H
Loma, Model X5 500, stainless steel, left to right, X-Ray inspection system with number of product per minute – depending on materials, application and machine configuration. 304 stainless steel #4 polish dry wipe down construction. Total aperture: 8" in Height; 18" in Width; 32" Chamber Length. Diode size: 0.8mm. X-Ray output: 150W. IP Rating: IP66. Temperature operating range: 41°F to 77 °F. Product sensitivities and weights: depending on product, container and enviorment being run in. Equipped with 18¾" wide x 38" long flat food grade anti static conveyor belt with speed up to 50 meters or (162 feet per minute) and 20" wide x 36" long Intralox style reject belt has mechanical reject toward operator with collection bin. 12" color touch screen controller with operator interface has rectangular inspection window, with multi-level password access and is data log, ethernet communicatuins and remote diagnostic acess capable, A/B powerflex vari-speed drive, with x-ray on, off, reset and start, stop, e-stop controls and external USB slot for easy upgrades and download of image and reporting data. Mounted on height adjustable (4) leg stainless steel frame.
OAD: 78"L x 56"W x 67"H
Willmes Model TP8, 8,000 litre, stainless steel rotary drum and membrane blatter tank press with volume of product per hour – depending on materials and application. Equipped with 52" OD x 211" long stainless steel rotary drum press has a 5 Hp (4) chain motor to sproket drive with 1-1/2" OD and 3" OD vertical side drum juice drains and membrane silencer. 100" OD x 84" straight wall x 74" slant bottom, stainless steel product feed hopper with (3) 21" OD manways and bolt down covers, (1) 18" OD center port with (2) 3-/12" OD / 2" ID sanitary top ports. 26" OD bottom port has single pnuematic piston slide gate with 34" floor clearence and internal PVC membrane drainage channels to 8" OD flanged end plate with 48" floor clearence and 69" long x 34" wide x 12" high product drip tray with front end auxillary 4.5 Hp vacuum turbine. Control panel has Allen Bradley CPU controller with panel view. Mounted on (4) leg heavy duty painted steel, frame with remote 150 psi membrane blatter air tanks.
OAD: 259" L x 79" W x 267" H Press
80" OD x 117" H Air Tank
Kason, Model MO-SS, continuous, stainless steel, centrifugal sifter with pounds of product per hour – depending on materials and application. Equipped with 20" in Length x 10" ID sifting chamber with 11" OD / 6½" ID flanged top product charge, top and front hinged bolt down access doors, paddle and screw, bottom 10" ID discharge for undersize product with 29" floor clearence and end 5½" ID discharge oversize product with 38" floor clearance. Powered by single 3 hp motor drive. Ideal for scalping, de-agglomerating, classifying and conditioning of product down to a uniform size.
OAD: 75"L x 32"W x 62"H
Laub Model RPF300-30P Posifiller, 30 head, rotary, pressure assit, piston filler rated from 30 to 300 containers per minute – depending on materials and application. Fill range: ounces to gallons of semi viscous to viscous liquids, accuracies depending on product and container. Maximum container size: up to 7-1/2" in Diameter; up to 12" in Height, capable of handling glass, plastic and metal containers with proper change parts. Equipped with container conveyor, worm screw to star wheel in feed and discharge (change part per application), 100" OD turret with top driven pressurized pre-measuring device to the (30) filling stations with 4" OD x 16" Long piston and 7/8" OD nozzles set on 10" centers with metering tank and diaphram pump. Control panel, has A/B PLC. Mounted on (4) leg base frame.
OAD: 156" L x 120" W x 111" H
Complete soap bar finishing line. Equipped with an IMCS Hydra-Dump tote dumper, Barbour Stockwell Co 30 ft³ paddle blender, Lehmann model 912 SA 5-roll mill, 10" diameter screw conveyor transfer augers, Bonnot Co duplex plodder with agitated hopper, Sharp Bros bar cutter and SAS model Condor 75 press.
DCI, 4,000 Gallon, 304 stainless steel, horizontal single wall tank. Vessel Dimensions: 78¼" diameter x 200" deep with a 192" straight wall. Equipped with 16" x 20" diameter side bottom bolt down man way, 3½"OD / 3"ID Tri-clamp fitting infeed and 3½"OD / 3"ID Tri-clamp fitting discharge with 7" ground clearance.
Top Access:
(2) 3½" NPT
(1) 4½"OD / 4"ID Tri-Clamp
Side Access:
(1) 5"OD / 4½"ID Tri-Clamp
(1) 2"ID Flare Out
OAD: 124"L x 80"W x 100"H
Blommer, 50,000 lbs, carbon steel, horizontal, low pressure, jacketed, chocolate melting and mixing vessel, with pounds of product per hour – depending on materails and application. Inner chamber dimension: 192" in Length; 85" in Width; 88" in Depth. Equipped with sweep agitator driven by 15 Hp motor drive and 3" diameter end discharge with 15" ground clearance.
Jacket:
(4) 1½" NPT
(4) ¾" NPT
OAD: 270"L x 90"W x 104"H
Blommer, 60,000 lbs (30,000 lbs per side), carbon steel, horizontal, low pressure, jacketed, chocolate melting and mixing vessel, with pounds of product per hour – depending on materials and application. Inner chamber dimension: 108" in Length; 96" diameter (each side). Equipped with sweep agitator driven by 15 Hp motor drive and (2) 3" diameter end discharges with 15" ground clearance.
Jacket:
(4) 1¼" NPT
OAD: 283"L x 101"W x 120"H
McCarter, 25,000 lbs, carbon steel, horizontal, low pressure, ½ jacketed, chocolate melting and mixing vessel, with pounds of product per hour – depending on materails and application. Inner chamber dimension: 132" in Length; 72" in Width; 75" in Depth. Equipped with sweep agitator driven by 10 Hp motor drive and 3" diameter center bottom discharge with 30" ground clearance.
Jacket:
(5) 1" NPT
OAD: 185"L x 77"W x 116"H
Pack West Model C-6-A/C-30-LR-A1594, Inline, 3 station, 6 spindle, stainless steel capper rated 20 to 150 containers per minute – depending on materials and application. Cap size range: 0.3" (8mm) to 2.7" (70mm) OD with rotary disc sorter. Container size range: 0.5 " (12mm) to 9.9" (175mm) OD x 2" (50mm) to 15" (381mm) in Height. Equipped with 24" OD rotary disc sorter, bump wheel, 3 station, 6 spindle cap tightners. Control panel has gripper belt and quill speed controls with air clutch. Mounted on roll over conveyor frame with casters and leveling legs.
OAD: 75"L x 45"W x 92"H
Pacific Packaging, 12 head, stainless steel, rotary, volumetric filler with number of containers per minute – depending on materials, application and machine configuration. Equipped with 4½" wide container conveyor with worm screw to star wheel in feed and discharge, 19" long x 10" wide x 18" deep product hopper, Waukesha Model 30 PD pump and has (12) ¼" ID positive cut off fill nozzles capable of doing both light and semi-viscous product. Control panel with A/B PLC controller and touch screen HMI controls. Mounted on heavy duty stainless steel frame with safety door guarding.
OAD: 100"L x 64"W x 82"H
