Aerosol Machines

Used Aerosol Equipment

Aerosol equipment is used in the production of packaging which uses a gas as a propellant for the product inside the container or can.  Cans of spray paint are aerosol containers.  The gas within the container is held under pressure so that when the product is given an outlet, such as pushing the trigger, the gas under pressure expands to fill a greater volume and reduce that pressure.By filling a greater volume, the gas displaces the product in the container.  The product is then propelled out, such as paint in a spray paint can.

Aerosol Equipment In Stock

Consolidated / Pneumatic Scale Aerosol Tipper/Crimper VC415

Capem Vc-4-15 Four Head Rotary Valve Crimper Is Set For An Aerosol Can 2 11/16" Diameter. Has A Worm Screw To Star Wheel Infeed And Star Wheel Discharge. Valve Would Be Preset In Container Before Being Conveyed To Crimper. Conveyor Is 8′ From Centerline Of Butt Joint On Discharge End. 3 1/4" Delron Chain. Will Run Approx. 120 Containers Per Minute. 1" Diameter Crimp.

Get a Free Quote Call: 630-629-9900

Cherry Burrell Aerosol Filler FFH8

Low capacity ingredient feeder capable of 80 to 900 gph of ice cream throughput. Has 3/4 cu.ft. stainless steel ingredient hopper with gentle mixing action, 3" dia x 12"H downstream product blender, 2 1/2" threaded O.D. inlet, 2 1/2" threaded I.D. outlet, spinning disc in hopper to meter ingredients into product stream, and rotary disc to mix product in product stream. Mounted on casters. Incorporates exact amounts of wet or dry ingredients into the finished ice cream.

OAD: 31"L x 24"W x 54"H

Get a Free Quote Call: 630-629-9900

Anderson Aerosol Tipper/Crimper

  • Manufacturer: Anderson
  • Model Number:
  • Frain Number: 5B7621

Anderson, Fully automatic 8 head rotary tipper capable of speeds up to 160 tips per minute. Last used in cosmetic operation running tips for 13, 15, 18 & 20 mm actuators – one set included with machine. Has worm screw to star wheel container handling.

OAD: 8′ L x 7′ W x 6′ 4" H

Get a Free Quote Call: 630-629-9900

PMC Aerosol Valve Inserter RI-1200 Rotary, 12 Hd, valve inserter, W/Hopper

  • Manufacturer: PMC
  • Model Number: RI-1200
  • Frain Number: 5E1688

PMC RI-1200, 12 head rotary aerosol valve inserter, incline feeder, and dual disc feed system capable of speeds 40 to 240 per minute – depending on application. Unit has a maximum container size range of up to 4-3/4"W and 12"H. Equipped with a 12"W x 120"L magnetic incline feeder with a 6 ft³ product hopper and 4"H guide rails, dual rotary disc cap sorters with dual feed chutes, and a 12 head aerosol valve inserter with a 3"W x 52"L delrin infeed conveyor, worm screw to star wheel infeed and discharge, 1"dia cap indexer and inserter, and enclosed noise proof chamber. Painted aluminum construction with height adjustable legs.

OAD: Inline Feeder 72"L x 40"W x 156"H
OAD: Dual Disc Feed Hopper 76"L x 84"W x 104"H
OAD: Aerosol Valve Inserter 80"L x 42"W x 86"H

Get a Free Quote Call: 630-629-9900

Kartridg Pak Aerosol Filler 124-42-12

  • Manufacturer: Kartridg Pak
  • Model Number: 124-42-12
  • Frain Number: 5C1593

Kartridg Pak Model 124-42-12 a fully automatic 12 head rotary open can product filler capable of speeds of 25 cpm per head or 300 cans per minute. Has a fill range of: 4 – 550cc with Changeparts, Currently set up with 250cc fill heads. Container size range of (with proper change parts): HEIGHT 2.38" – 12.25" (61mm – 311mm) x DIAMETER 1.375" x 3.00" (35mm – 76mm). No can no fill. (OAD: 60"L x 54"W x 84"H).

Get a Free Quote Call: 630-629-9900

JG Aerosol Tipper/Crimper

  • Manufacturer: JG
  • Model Number:
  • Frain Number: 5E0148

JG, semi automatic, dual post crimping unit with single cycle crimping. Capable of up to 15 closures@minute. Currently set for a 20mm cap closure. The Heads are also adjustable up and down for different height containers. Air operated with start / stop push buttons on each side to cycle.

OAD: 34" L x 34" W x 62" H

Get a Free Quote Call: 630-629-9900

Kartridg Pak Aerosol Filler RPD18

  • Manufacturer: Kartridg Pak
  • Model Number: RPD18
  • Frain Number: 5D5833

Kartridge Pak RPD18, Automatic, 18 hd rotary, 316 S/S, piston filler capable of speeds up to 450 cpm depending size container and fill. Has fill size range from 5cc – 1000cc with accuracies of .5cc and can handle container up to 32oz. 30" OD turn table, has 18 fill stations with 4" L x 5" W rising container platforms, 3 3/4" ID open design air operated product pistons, with 1/4" OD cut-off nozzles have 2" dia tri-clover fittings, worm screw to a star wheel infeed, and discharge, no container / no fill bottom up fill, capable of handling various type liquid fills, free-flowing, or viscous up to 15,000 centipoise warm or cold, has a Tri-clover product pump into holding basin with a 2 1/2" OD intake and a temperature gauge, and is mounted, S/S base frame with S/S, bolt down saftey guarding.

OAD: 84" L x 70" W x 96" H

Get a Free Quote Call: 630-629-9900

JG Aerosol Tipper/Crimper Semi automatic double post crimping unit with single cycle crimping

  • Manufacturer: JG
  • Model Number:
  • Frain Number: 5D3005

JG, Semi automatic double post crimping unit with single cycle crimping. Capable of 40 to 50 closures a minute, from 2 1/2" to 20 1/2" in height. Pneumatic powered, 31" tall S/S work surface. Plexiglas shields and a two hand safety switch.

OAD: 60" H x 36" W x 20" L

Get a Free Quote Call: 630-629-9900