Filter Machines

Used Filter Equipment

Filters are designed to remove particles and other components from a flow of liquid or gas. Depending on the application for the filter, the desired output from a filtration process can be either the media (liquid or gas) without the filtered particles or the particles that have been removed from the media. Filters are designed for their intended application and are designed with a correspoding filtration spacing.

Filter Equipment In Stock

Andritz Separation Inc Filter 17"W

Andritz, 17" wide stationary-screen dewatering separator. Unit rated up to 100 GPM depending on materials, application, environment and machine configuration. Equipped with a 4¾"OD/4"ID Tri-Clamp style product with water charge into top trough with 2½"OD / 2" ID Tri-clamp bottom fitting, 24" wide x 48" long x 15" deep resivoir with 2½"OD / 2"ID Tri-clamp discharge with 4" ground clearance and 17" wide x 14" long screen with (1/32)" gaps and 22" ground clearance.

OAD: 55"L x 32"W x 36"H

Get a Free Quote Call: 630-629-9900

Perrin Filter Plate & Frame 10 FT³

  • Manufacturer: Perrin
  • Model Number: 10 FT³
  • Frain Number: R29311

Perrin, horizontal, stainless steel, side bar plate and frame filter press. Volumes of product per hour – depending on materials, application and machine configuration. Equipped with (31) 24" x 24" x 1" square cake plates with cake capacity of 10 ft³ and (32) 24" x 24" filtering plates with a filteration area of 128 ft², (4) 2"OD/1½"ID Tri-clamp inlet / outlets, hand crank filter closure and air over oil hydraulic finishing closure. Mounted on (4) leg base frame.

OAD: 132"L x 53"W x 43"H

Get a Free Quote Call: 630-629-9900

Perrin Filter Plate & Frame 16 FT³

  • Manufacturer: Perrin
  • Model Number: 16 FT³
  • Frain Number: R29310

Perrin, horizontal, stainless steel, side bar plate and frame filter press. Volumes of product per hour – depending on materials, application and machine configuration. Equipped with (50) 24" x 24" x 1" square cake plates with cake capacity of 16 ft³ and (51) 24" x 24" filtering plates with a filteration area of 200 ft², (4) 2"OD/1½"ID Tri-clamp inlet / outlets, hand crank filter closure and air over oil hydraulic finishing closure. Mounted on (4) leg base frame.

OAD: 168"L x 55"W x 47"H

Get a Free Quote Call: 630-629-9900

Parkson Corporation Filter Rotary RDT100

Parkson, Model RDT-100, stainless steel rotary drum thickener. Rated from 25 to 100 gallons per minute – depending on materials, application and machine configuration. Equipped with a 4" NPT charge, 25" diameter x 40" deep (75 gallon) "flocculation" tank with ½ hp paddle agitation for mixture detention time, 30" diameter x 96" long baffeled rotarty drum screen powered by a 1 hp drive, screen spray nozzles supplied by a 1" NPT fitting, open-end solids discharge with 30" ground clearance and 105" long x 40" wide x 10" deep liquid collection bin with 4" NPT bottom drain with 11" ground clearance. System mounted on heavy duty stainless steel frame.

OAD: 138"L x 50"W x 70"H

Get a Free Quote Call: 630-629-9900

MP Equipment Filter Rotary CO39

  • Model Number: CO39
  • Frain Number: 5H3032

MP Equipment, Model CO39, endless media filter. Equipped with (2) 2½"OD / 2"ID Tri-clamp style charge ports, 36" wide mesh filter screening belt powered by a 1 HP drive with scrapper blade, (2) 2½"OD / 2"ID Tri-Clamp style discharge ports and bottom mounted drip pan. Control panel with on / off switch and push button start / stop controls.

OAD: 70"L x 58"W x 54"H

Get a Free Quote Call: 630-629-9900

MP Equipment Filter Rotary CO39

  • Manufacturer: MP Equipment
  • Model Number: CO39
  • Frain Number: 5H3033

MP Equipment, Model CO39, endless media filter. Equipped with (2) 2½"OD / 2"ID Tri-clamp style charge ports, 36" wide mesh filter screening belt powered by a 1 HP drive with scraper blade, (2) 2½"OD / 2"ID Tri-Clamp style discharge ports and bottom mounted drip pan. Control panel with on / off switch and push button start / stop controls.

OAD: 70"L x 58"W x 54"H

Get a Free Quote Call: 630-629-9900

Millipore Filter P630X500

  • Manufacturer: Millipore
  • Model Number: P630X500
  • Frain Number: 5C3774

156L BioChromatography production column for process purification in the pharmaceutical and biotechnology industries. Unit is equipped with Millipore’s distribution cell which assures uniform flow across the whole cross-sectional area of the column bed, which is essential for maximum efficiency, resolution and capacity. Resin media is sold separately by Millipore. Column has a pressure rating of 15 PSI and an adjustable height of 0 – 500mm. Quick release nuts simplify adjuster movement. Unit is designed with sanitary clamp connections, acrylic tubes for high solvent resistance and has the optional minimum-deadspace (MDS) inflatable seal. The seal provides a completely flush joint between the adjuster cell and the column wall. Column has a diameter of 630mm. Unit is mounted on casters for easy mobility. After last use, unit was cleaned and prepared for reuse by Centecor Pharmaceuticals. OAD = 30" W x 35" H.

Get a Free Quote Call: 630-629-9900

Dontech Industries Inc Filter Rotary IS34

Dontech Industries, Model IS-34, stainless steel internally fed rotary drum screen. Rated from 500 to 3,500 gallons per minute – depending on materials, application and machine configuration. Equipped with a 6½"OD / 5¾"ID Tri-clamp style charge port, 36" diameter x 64" long rotarty drum screen powered by a ¾ hp drive, 18" x 13" solids discharge with 94" ground clearance, 51" long x 48" wide x 64" deep liquid collection bin with (1) 3½"OD / 3"ID Tri-clamp bottom drain with 22" ground clearance and (1) 4¾"OD / 4"ID bottom side discharge with 30" ground clearance.

OAD: 110"L x 65"W x 142"H

Get a Free Quote Call: 630-629-9900

Filter Rotary MF1622

  • Model Number: MF1622
  • Frain Number: 5H0487

Emco, Model MF1622, endless media filter. Rated from 10 to 100 gallons per minute – depending on materials, application and machine configuration. Equipped with a 2½"OD / 2"ID Tri-clamp style charge port, 16" diameter x 18½" wide rotary drum with (2) 2" high scraper paddles, 22" wide Intralox style filter belt and an on / off switch.

OAD: 35"L x 35"W x 40"H

Get a Free Quote Call: 630-629-9900

Filter Rotary 15½" DIA

  • Model Number: 15½" DIA
  • Frain Number: 5G9991

Stainless steel, 15½" diameter, rotostrainer. Equipped with a 15½" diameter x 31" long screen with .5mm openings powered by a 2 hp drive. The screen is externally fed to a 28" long x 7" wide x 4" deep trough along the length of the cylinder. Solids are caught on the outside of the screen surface and are removed by a 31" wide spring tensioned scrape blade. liquids flow through the drum and into a 24" wide x 66" long x 19" deep bin with (6) cartridge filters connected to a 3½"OD / 2½"ID threaded port. Resivoir also equipped with (3) 2½"OD / ID Tri-clamp style access ports.

OAD: 77"L x 36"W x 39"H

Get a Free Quote Call: 630-629-9900

Us Filter Filter Cartridge FILTER

  • Manufacturer: Us Filter
  • Model Number: FILTER
  • Frain Number: 5G9309

US Filter, base mounted filtration system with gallons of product filtered per hour – depending on materials, application and machine configuration. Equipped with a Filterite, Model T910717-00, 8½" diameter x 32" high stainless steel (6) cartridge filter vessel with a MAWP of 150 PSI @ 200°F. Tranter, Model UX-066-HJ-20, plate and frame heat exchanger with 11.4 ft² surface area and a MAWP of 100 PSI @ 260°F. G & L Pumps, Model SSH, stainless steel centrifugal filter pump with a 7.375 diameter impeller powered by a 7½ hp drive. Control panel has booster pump jog / off / auto switch and heat exchange steam supply hand / off / auto switch. Water fittings; 2½"OD / 2"ID Tri-clamp inlet to pump with (1) 2½"OD / 2"ID Tri-clamp and (1) 2"OD / 1½"ID Tri-clamp discharges. Steam fittings; 1½" NPT inlet and 1" NPT discharge. Mounted on 60" long x 56" wide base platform with casters.

OAD: 68" L x 68" W x 89" H

Get a Free Quote Call: 630-629-9900

Pall Corporation Filter Cartridge UHFSH14G47J

(5) Pall, Model UHFSH14G47J, 316 stainless steel single cartridge filter housings with flow rates from 50 to 350 GPM each – depending on materials and application. Vessel dimensions: 8¼" ID; 47" in Height (14.7 gal). MAWP dependant on housing O-ring material: -14.5 / 145 PSI @ 14 / 194°F. Equipped with (2) 2"OD / ¾"ID Tri-clamp top vent on cap, (2) 2"OD / ¾"ID Tri-clamp bottom drains and (2) 3½"OD / 3"ID Tri-clamp product inlet and outlets. Mounted on a stainless steel rack with casters.

OAD: 72"L x 62"W x 52"H

Get a Free Quote Call: 630-629-9900