Disperser Machines

Used Disperser Equipment

The disperser liquid type of batch mixer uses intense dispersion mixer blades that are lowered into the liquid and then energized for mixing and dispersion of the materials in the solutions. Liquid disperser vertical mixers can approach near emulfication and can handle very thick materials upon completion of the mixing. Liquid disperser mixers are also capable of handling chemical reactions and can be in closed tanks that can maintain an inert gas atmosphere.

Related Categories

Disperser Equipment In Stock

Scott Turbon Mixer Mixer Liquid Disperser XMLV

Scott Turbon, Model XMLV, high shear benchtop mixer. Equipped with 5" diameter x 7" deep mixing tank, lift out high shear mixer powered by 2 hp drive, vacuum pump. A/B touch pad controller with read out and pump start, stop push button.

OAD: 24"L x 24"W x 22"H

Get a Free Quote Call: 630-629-9900

Burdosa / Burtech Mixer Liquid Disperser GR80

Burdosa, Model GR80, inline, continuous, dynamic loop mixer. Rated from 60 to 92 gallons per minute – depending on materials, application and machine configutation. Equipped with an 8" OD x 16" long mixing chamber with a low pressure jacket, 3"OD / 2"ID seated bevel style primary charge port, 5½"OD / 1½"ID circular flange style secondary charge port and 3"OD / 2"ID seated bevel style discharge port. Mixer rotor powered by a 5.3 hp drive with variable speed controls.

OAD: 40"L x 32"W x 80"H

Get a Free Quote Call: 630-629-9900

Reynolds Mixer Liquid Disperser PK-1470

  • Manufacturer: Reynolds
  • Model Number: PK-1470
  • Frain Number: 5C3562

High speed disperser, hydraulic driven with stainless steel (49" long) shaft with 12” diameter saw tooth mixing blade. Speed range to 1800 rpm. Shaft lift of 48”. Equipped with a 20 hp hydraulic power pack.

OAD: 7’L x 2’W x 7’H

Get a Free Quote Call: 630-629-9900

Reynolds Mixer Liquid Disperser PK1538

  • Manufacturer: Reynolds
  • Model Number: PK1538
  • Frain Number: 5C3561

High-speed dual action dispersion mixer with a 36” hydraulic lift. Has a stainless steel shaft and 10” saw tooth disperser blade with a rpm range of 0-2290. Also has an attached 50 gallon stainless steel dimple jacketed tank rated at 15psi with a 3” center bottom discharge, low-speed bi-directional sweep/scrape agitator set at 0-100rpm’s. Tank is set to tilt in 15 degree increments to a total of 120 degrees. Has multiple product ports and re-circulating powder pump as well as a dust collection port. Equipped with a 20hp motor with a 21 gpm pump. Motor mounted on base with 85 gallon re-circulating oil reservoir and all necessary valves.

OAD 7’L x 6’W x 7’H

Get a Free Quote Call: 630-629-9900