Vial Ampul Insulated Machines

Used Vial Ampul Insulated Equipment

Pharmaceutical Vial Ampule Insulated are machines designed for the inspection of ampule (ampoules) and vials. Insulated vial ampule machines can be either semi-automatic, automatically presenting the vials to an operator who visually inspects them, or fully automatic, where the machine does the inspection without assistance from an operator.

Vial Ampul Insulated Equipment In Stock

Eisai Pharmaceutical Vial/Ampul Ins. AIM5872

  • Manufacturer: Eisai
  • Model Number: AIM5872
  • Frain Number: 5G2210

Eisai model AIM587-2, dual, 24 head rotary inspection system rated from 120 to 18,000 containers per hour – depending on materials and application. Compact design for inspection of ampoules and vials up to 28mm in diameter Equipped with container feed table, dual worm screw to star wheel in feed / discharges, dual 24 head rotary inspection stations with Halogen lamp light source, camera inspection system to detect particulates in containers. Control panel has Mitsubishi controller with drive, belt, spin, lamp, detector controls with conveyor and spin speed control dials. Operation: Machine rotates each container at high speed and then stops it abruptly, putting liquid into motion by inertia. Utilizing static division light transmission technology, light transmitted through the liquid causes any moving particles to cast shadows on high resolution sensors allowing the system to detect particulates of low to high reflectivity.and partticulates in low to medium viscosity liquids.

OAD: 100" L x 65" W x 59" H

Get a Free Quote Call: 630-629-9900

Eisai Pharmaceutical Vial/Ampul Ins. AIM1088M

  • Manufacturer: Eisai
  • Model Number: AIM1088M
  • Frain Number: 5D3801

Eisai 48 head, dual inspection/pre-spin machine capable of up to 250 vials per minute. Unit inspects solution for particles & fill level height. Vial range from 5ml to 50ml Min/max vial base of 13mm to 35mm in diameter x 110mm in height with a fill level max of 64mm, 64 bit Static Division sensor/camera vial identification scanner (to keep track of rejects) pre-spin station (consisting of in feed screw conveyor, conveyor guide, in feed star wheel, in feed guide, main guide). 24" S/S reject and accept turntable. Last used inspecting unstable vials for particle inspection and fill level inspection. Requires proper change parts to accommodate size range.

OAD: 218" (L) x 52" (W) x 80" (H)

Get a Free Quote Call: 630-629-9900