Buhler-Maig Machines
Buhler-Maig Machines In Stock
Buhler-Maig Extruder Single Screw M-MN-400
- Manufacturer: Buhler-Maig
- Model Number: M-MN-400
- Frain Number: 5H6570
Buhler Maig Model M-MN-400, inline, single screw extruder with productions rates per hour – depending on materials and application. Equipped with product portioner that has product feed hopper with dual 36" long x 2" OD screws feeding 58" long x 4-1/4" OD single screw extruder with 36" long x 4-1/2" OD single barrel and 8-1/2" OD / 4-1/2" ID flanged end product discharge port with (6) 3/4" bolt holes set on 6" centers and 36" floor clearence. Buhler Maig Micro dosing feeder for consitent volumetric proportioning of micro-ingredients such as vitamins, ascorbic acid, dry gluten, egg powder as well as flavoring agents and colorants, thats feeding into the dual screw portioner section that is feeding the single screw extruder. Main remote control panel has A/B CPU and stand alone controller with manual, auto, auto clean, standard and nominal run, mixer kneader and mixer kneader up / down, press screw fill water pipe, dosers with on / off switch e-stop and e-stop reset controls and individual temperature controller and a Mokon water heater. All mounted on individual frames.
OAD: 108" L x 48" W x 67" H Screw Extruder
40" L x 48" W x 74" H # (1) Doser
35" L x 32" W x 55" H # (2) Doser
30" L x 30" W x 82" H Main Control Panel
36" L x 20" W x 24" H Mokon Water Heater
Buhler-Maig Mill Roller (Mill) 6 X 11¾
- Manufacturer: Buhler-Maig
- Model Number: 6 X 11¾
- Frain Number: R30090
Buhler-Maig, Model 6 x 11¾, 3-Roll mill with volumes of product per hour – depending on materials and application. Equipped with (3) 6" in diameter x 11¾" long rollers powered by 3 Hp motor drive, with hand crank gap adjustment, scraper blades and 11¾" long working roll area. All (3) rolls made of hardened steel. Roller cooling with 2"OD / ¾"ID Tri-clamp inlet port for cooling medium and ¾" NPT outlet. Control panel has push button start, stop and e-stop. Mounted on heavy duty base frame with casters.
OAD: 36"L x 32"W x 48"H
Get a Free Quote Call: 630-629-9900Buhler-Maig Mixer Paste Horizontal SMC1500
- Manufacturer: Buhler-Maig
- Model Number: SMC1500
- Frain Number: 5F3250
55 ft³, 25 hp, hydraulic driven, carbon steel, horizontal paddle, batch mixer with a maximum capacity of 3,300 lbs – depending on materials and application. Chamber dimensions: 78" in Length x 40" in Width x 44" in Depth. Equipped with a 66" long x 10" wide top center inlet, four 13" long x 14" wide oval paddles on a 6" diameter shaft, 25" long discharge chute with 25" floor clearance.
OAD: 127" L x 54" W x 103" H
Get a Free Quote Call: 630-629-9900Buhler-Maig Mill Roller (Mill) SDW800
- Manufacturer: Buhler-Maig
- Model Number: SDW800
- Frain Number: 5E3791
Heavy duty 3-roller dispersion mill rated at 400 lbs per hour depending upon application equipped with 32"L x 10-1/2" diameter hardened steel rollers and a 32" working area. Also features water controllers to regulate temperature, product apron, variable speed controls and E-stop
OAD: 50"L x 78"W x 84"H
Get a Free Quote Call: 630-629-9900Buhler-Maig Mill Roller (Mill) SDW800
- Manufacturer: Buhler-Maig
- Model Number: SDW800
- Frain Number: 5E3790
Heavy duty 3-roller dispersion mill rated at 400 lbs per hour depending upon application equipped with 32"L x 10-1/2" diameter hardened steel rollers and a 32" working area. Also features water controllers to regulate temperature, product apron, variable speed controls and E-stop
OAD: 56"L x 78"W x 80"H
Get a Free Quote Call: 630-629-9900Buhler-Maig Mixer Paste Horizontal SMC1500
- Manufacturer: Buhler-Maig
- Model Number: SMC1500
- Frain Number: 5F0418
Buhler-Maig, 55 ft³, 25 hp, carbon steel, horizontal paddle, batch mixer with a maximum capacity of 3,300 lbs. Pounds of product per hour – depending on materails and application. Chamber dimensions: 78"long x 40" wide x 44" deep. Equipped with 76" long x 24" wide top center inlet, 14" long x 14" wide oval paddles on a 6" diameter shaft, 10" long x 10" wide center bottom slide gate discharge with 28" floor clearance.
OAD: 132"L x 54"W x 75"H.
Get a Free Quote Call: 630-629-9900Buhler-Maig Candy Chocolate Enrober UZM421
- Manufacturer: Buhler-Maig
- Model Number: UZM421
- Frain Number: 5H2946
Frisse, Model UZM421, 16" wide, top and bottom chocolate enrober with pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 16½" wide x 71" long stainless steel mesh belt thru the enrober, (1) 16¾" wide bottom roller applicator, (1) 16¾" wide jacketed top roller applicator, blower, detailer, shaker, overhead heaters with sliding and flip-up safety doors. System includes a positive displacement chocolate circulation pump and self contained two zone 5000 watt water heating system with (2) water pumps. Control panel with push button on/off controls for: agitation, bottom well, vibration, chocolate recirculation pump, chocolate return pump, curtain agitation, blower and detailing. Control panel also includes (3) temperature controls for: water zone 1, water zone 2 and air temperature.
OAD: 88"L x 51"W x 75"H (Enrober)
16"L x 63"W x 82"H (Control Cabinet)
Buhler-Maig Mixer Paste Horizontal
- Manufacturer: Buhler-Maig
- Model Number:
- Frain Number: 5F0660
30 Ft³, horizontal, carbon steel, paddle mixer rated up to 2000 lbs – depending on materials and application. Chamber inner dimensions: 57" in length; 30" in Width; 44" in Depth. Equipped with water jacketed chamber, hinged locked down cover (46" x 8-1/2"), sight port (9" x 4"), one 6", one 7", one 9" and one 10" OD flanged top inlets.10" x 10" center bottom slide gate discharge with 21" floor clearance.
OAD: 138" L x 36" W x 74" H
Get a Free Quote Call: 630-629-9900Buhler-Maig Mill Roller (Mill) REFINER
- Manufacturer: Buhler-Maig
- Model Number: REFINER
- Frain Number: 5E4620
2 roll mill used as a refiner for chocolate masses, creams, soaps, or inks to ensure homogeneous product fineness. Each roller is 15" in Diameter and 56" in Width with a working surface of 51". Equipped with dump hopper on weigh cell, GE 60hp motor, hydraulic adjustments and E-stop. Produces a higher uniformity of the end fineness and of the flow characteristics, and it allows the fat requirement to be reduced and the rheological characteristics of the end product to be improved.
OAD: 100" L x 80" W x 72" H
Get a Free Quote Call: 630-629-9900Buhler-Maig Mill Roller (Mill) SDA
- Manufacturer: Buhler-Maig
- Model Number: SDA
- Frain Number: 5C8921
3-Roll dispersion mill has (3) 8"diameter x 24"long rollers. Unit complete with apron, end plates and a hydraulic roll set system. Dispersion mill capacity of 700 lbs/hour (based on heavy paste mix [approx 14lbs/gal] using an average dispersion film thickness of .0005"). Primarily used to grind cosmetics, printing ink, lacquers, chocolates, plastics, ointment and paints. Water cooled rolls made of hardened steel. Was last used running in a cosmetic operation.
(OAD: 96"L x 44"W x 60"H). Approx. Wt: 8,000lbs