See us at the PMCA Show in Lancaster, PA on 4/15
Home ยป Goodway
Continuous aerating mixing system capable of up to 800 pounds per hour. Equipped with 1-1/2" tri-clamp inlet/outlet, jacketed mix chamber and a Waukesha positive displacement pump. Mounted on casters.
OAD: 64" (L) x 38" (W) x 50" (H)
Goodway Model CM35, compact, stainless steel, continuous, high shear, rotar, stator, aerator, mixer rated from 250 to 4800 pounds of product per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Bottom product pump with 2" OD threaded in/outlet ports. Control panel has mixer / pump speed control dials, head pressure regulator and pump and mixer hand, auto, off switches. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.
450 gallon, 304 stainless steel, slant bottom holding tank. Vessel Dimensions: 46" diameter x 90" deep with a 45" straight wall. Equipped with a 3½"OD / 3"ID Seated Bevel style bottom discharge with 8" ground clearance. Mounted on (4) legs.
OAD: 78" L x 30" W x 80" H (mixer)OAD: 48"L x 48"W x 110"H (tank)
Goodway, Model VBM 2000, 304 stainless steel, slurry mixer and transfer system. Rated to 2,000 lb batches with 4 to 9 minutes mix times per batch – depending on materials, application and machine configuration. Equipped with a 44" ID x 52" straight wall stainless steel mixing tank (300 gallons) with half flip up bolt down cover, two stationary stator assemblies one each side and inner rotating mix blades with bottom platform mounted ___ Hp main motor drive and ___ hp secondary motor drive for slow speed mixing while pumping. Waukesha Model 130 postive displacemet transfer pump with 3½"OD / 3"ID seated bevel style inlet/outlet ports with 10" ground clearance and 10 Hp motor drive with a 10:1 ratio gearbox for a discharge rate of 45 gpm. Control panel with push button start / stop for mixer and pump, timer dials for mixer and pump and product valve open / close switch. Mounted on a 96" long x 60" wide stainless steel platform.
OAD: 96"L x 60"W x 84"H
Goodway compact, high shear, continuous, stainless steel, rotar, stator, aerator, mixer with rates per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Control panel has rotor / mixer and pump supply speed controls, rotor and pump stops, air supply, and back pressure gauges with flowmeter. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.
100 gallon, 304 stainless steel, slant bottom holding tank. Vessel Dimensions: 30" diameter x 47" deep with an 18" straight wall. Equipped with a 3½"OD / 3"ID Seated Bevel style bottom discharge with 11½" ground clearance. Mounted on (3) legs.
OAD: 64" L x 40" W x 48" H (mixer)OAD: 36"L x 34"W x 63"H (tank)
Goodway Model CM35, compact, stainless steel, continuous, high shear, rotar, stator, aerator, mixer rated from 250 to 4800 pounds of product per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Bottom product pump with 2-1/2" OD threaded in/outlet ports. Control panel has rotor / pump speed controls and start / stop push buttons. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.
OAD: 78" L x 40" W x 51" H (mixer)OAD: 36"L x 34"W x 63"H (tank)
Goodway Model CM35, compact, stainless steel, continuous, high shear, rotar, stator, aerator, mixer rated from 250 to 4800 pounds of product per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Control panel has mixer / pump speed controls air suipply, head pressuree rergulator, and head presasure gaugesa flow and hour meters. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.
145 gallon, 304 stainless steel, single wall storage tank. Vessel Dimensions: 29" in Diameter; 66" straight wall. Equipped with a slant bottom and a 4.5" OD side discharge with 16" of floor clearance. Mounted on three steel legs.
OAD: 66" L x 35" W x 78" H (Mixer)OAD: 33" L x 33" W x 84" H (Tank)
Goodway Model 1000 lb or 120 gallon capacity, stainless steel, slurry mixer and transfer system, with number of pound or gallons of product per hour – depending on materials and application. Equipped with 36" OD x 38 Deep, stainless steel, single wall, flat top mixing tank with 2 piece flip top, quick release clamps bolt down cover, with dry / liquid inlet ports. (8) 17" long x 3" wide x 1/2" thick rotating single motion mixing blades and (4) 17" long x 3" wide x 1/2" thick stationary fixed blades each side.. Flat bottom has bottom Flat bottom has bottom tank support assembly with heavy duty gear reducer and 4-1/2" OD pump out discharge port with a Waukeshaw Model 60 PD pump has 3" OD / 2-1/2" ID threaded in/outlet ports. Control panel has start, stop, e-stop push button controls with cycle counter. Mounted on 75" long x 48" wide platform plate base stand. Designed for cake or other batters or to prepare a uniform unaerated premix of ingredients for use with a continous mixer.
OAD: 75" L x 48" W x 66" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.