Omega Design Machines


Omega Design Machines In Stock

Omega Design Feeder Incline/Cleated (2)17W

  • Manufacturer: Omega Design
  • Model Number: (2)17W
  • Frain Number: 5G4112

Omega Design, dual lane, incline cleated belt feeder. Equipped with (2) 1/3 HP individually driven 17¼" wide belts with 3"high cleats on 12"Centers and 10"high side guards with a 97" discharge height. 65" long x 46" wide x 44" deep stainless steel supply hopper with (2) 18" x 18" side doors. Mounted on mild Steel frame and base.

OAD: 102"L x 68"W x 105"H

Get a Free Quote Call: 630-629-9900

Omega Design Feeder Desiccant CDFR-1D1

  • Manufacturer: Omega Design
  • Model Number: CDFR-1D1
  • Frain Number: R31166

Omega Design, Model CDFR-1D1, in line canister style desiccant despenser with incline cleated belt feeder and container conveyor rated from 50 to 400 single drops and 50 to 300 double drops per bottle per minute – depending on materials, application and desiccant design. Stainless steel construction and is capable of feeding 1 to 3 gram desiccants into containers single or multiple drops per bottle with proper change parts. Equipped with 24" long x 21" deep desiccant feed hopper with plastic flip up cover, 72" long x 2" wide inclined cleated feeder with continous rotary feed conveyor belt with 2" high cleats set on 5" centers and plastic cover with 70" discharge height. 12" OD desiccant sorting disc, with 3/4" wide desiccant canister tube dispenser with spacing belt and product counter. Control panel has A/B PLC controller and A/B PanelView controls with elevator, pre-orienter, spacing belt control drives with variable speed controllers and statis light bar. All Mounted on stainless steel base frames and has stainless steel container conveyor with 120" long x 4-1/2" wide plastic delrin belt with bump wheel discharge.

OAD: 138" L x 42" W x 74"H

Get a Free Quote Call: 630-629-9900

Omega Design Unscrambler Bulk Plastic 4D-ST

  • Manufacturer: Omega Design
  • Model Number: 4D-ST
  • Frain Number: 5B5571

Omega Design 4D-ST, 304 S/S plastic unscrambler for "F" style rectangle containers capable of speeds of 20 – 40 cpm depending on size of container. Includes orienter unscrambler, hopper with incline feed conveyor and discharge conveyor with secondary orienter to turn F style containers 180 degrees for consistent orientation of bottle neck. Equipped with a 30 Cuft hopper with low level indicator and beacon, with 3’W x 12’L cleated belt elevator conveyor, a 3′ disc paddlewheel sorter/unscrambler with air reject system and a 90 degree ( 3 ft infeed, 6 ft outfeed ) curved conveyor with secondary orienter. Includes Allen-Bradley SLC-500 with expansion. Unit designed for 35 ml (40 cpm), 125 ml (30 cpm) and 1 litre (20cpm) containers.

Get a Free Quote Call: 630-629-9900

Omega Design Shrink Bundler DL18

  • Manufacturer: Omega Design
  • Model Number: DL18
  • Frain Number: 5H3613

Omega Design Model DL18, automatic, right to left feed shrink bundler with number of containers per minute – depending on materials and application. Container size: from fractional once to imperial gallon of round or square bottles with outsert or topsert carton and 5th panel carton (all with proper change parts). Equipped with 4" wide x 72" long right to left plastic delran product in feed conveyor with collation section to wrap single or multiple items and single arm product loader thru polyethylene shrink or stretch film, with 24" wide top / bottom film feed rolls and 18" wide top / bottom seal jaws and has maximum product height of 11". Shrink tunnel has 27-1/2" wide x 11" high total aperture x 24" long heat chamber and 17-1/2" wide x 72" rubber belt product conveyor. Control panel has CPU controller and swing arm controls with seal jaw temperature controllers, and on / off heater switch with start, stop and e-stop push buttons. Mounted on heavy duty base frame with interlock safety guarding and casters.

OAD: 96" L x 80" W x 69” H

Get a Free Quote Call: 630-629-9900

Omega Design Material Handling Barrell Dumper OM100

  • Manufacturer: Omega Design
  • Model Number: OM100
  • Frain Number: 5H2960

Omega Design, Model OM100, Stainless steel pneumatic drum lift and dumper. Rated for a maximum load of 450 lbs. Equipped with a 23½"OD top clamping hood with a 8" OD discharge and pneumatic butterfly flow valve. Lift has 60" of vertical travel with a 60" maximum discharge height. Control panel with push button clamp / unclamp, lift / lower switch, invery / upright switch, valve open / close switch and E-stop. Mounted on a powered cart base with forward / reverse control switch.

OAD: 80"L x 58"W x 94"H

Get a Free Quote Call: 630-629-9900

Omega Design Unscrambler Bulk Plastic 3DRP18DFS

  • Manufacturer: Omega Design
  • Model Number: 3DRP18DFS
  • Frain Number: 5G7778

Omega Design, Model 3D-RP1-8-DFS, automatic, bulk plastic container unscrambler and desiccant dispenser. Rated from 10 to 80 containers per minute – depending on materials and application. Container size range: 30cc – 1500cc – with proper change parts. Equipped with a 40" long x 39" wide x 26" deep (10 ft³) stainless steel hopper with incline feed conveyor with a 87" long x 12" wide belt with 3" high cleats on 12" centers. 36" diameter container sorting bowl, container drop chute, (8) head gripper container transfer, air blast container cleaner, 12" diameter desiccant sorting bowl, (3/8)" desiccant drop chute, container spacing belt, 67" long x 4½" wide product discharge conveyor and safety guarding. Control panel with AB controller and variable speed dials for elevator, pre-orienter, conveyor, main drive and belt drive.

OAD: 120"L x 102"W x 104"H

Get a Free Quote Call: 630-629-9900

Omega Design Unscrambler Bulk Plastic 6D-RVP-11

  • Manufacturer: Omega Design
  • Model Number: 6D-RVP-11
  • Frain Number: 5G6753

Omega Model 6D-RVP-11, automatic, floor level, rotary, vacuum pocket, bulk bottle unscrambler and orientator rated from 50 to 250 containers per minute – depending on materials and application. Container size range: 8oz to 1 gallon and capable of handling round, square, oval and f-style containers with proper change parts. Equipped with 95" long x 64" wide x 28" deep live bottom bulk bottle feed hopper, with 108" long x 20-1/2" wide incline cleated belt feeder with 4" high cleats on 12" centers, and 100" discharge height, 72" diameter low level sorting disc, with bottle level sensor to 28" OD rotary plate with 10-head vacuum bottle pick off stations, that orientates containers upright to 144" long x 4-1/2" wide product discharge conveyor with 36" long x 2" wide container side belt stabilizer. Remote control panel has A/B controller, with touch pad controller with readout and elevator, hopper, conveyor,side belt and pre-orientator counters, on board control panel with pre-orientator forward, retract, center, overload up / down and start, stop,reset, e-stop push button controls with bottle lift manual, auto, off switchpush button controls, integrated vacuum pump and interlock safety guarding. Mounted on base frame with height adjustable legs.

OAD:

Get a Free Quote Call: 630-629-9900

Omega Design Feeder Desiccant CDFR

  • Manufacturer: Omega Design
  • Model Number: CDFR
  • Frain Number: 5G7798

****PART OF COMPLETE LINE****

Omega Design, Model CDFR-1.5D1, "canister style" desiccant feeder. Rated from 50 to 300 bottles per minute – depending on materials, application and drops per bottle. Feeds 1 – 3 gram desiccants into containers with proper change parts. All stainless steel construction. Equipped with a 23" long x 16" wide x 20" deep feeder hopper, 70" long inclined belt with 2" high cleats on 4¼" centers and a 74" discharge height. 18" OD product sorting disc, 12" long x ½" wide container spacing belts and pocket style canister dispenser. AB PanelView Plus 600 controls and control dials for spacing belt, elevator drive, preorienter drive and spacing drive. Mounted on stainless steel base frame with casters. Change parts required for different size canisters.

OAD: 103"L x 40"W x 87"H

Get a Free Quote Call: 630-629-9900

Omega Design Feeder Desiccant CDFR

  • Manufacturer: Omega Design
  • Model Number: CDFR
  • Frain Number: 5G7797

****PART OF COMPLETE LINE****

Omega Design, Model CDFR-1.5D1, "canister style" desiccant feeder. Rated from 50 to 300 bottles per minute – depending on materials, application and drops per bottle. Feeds 1- 3 gram desiccants into containers with proper change parts. All stainless steel construction. Equipped with a 23" long x 16" wide x 20" deep feeder hopper, 70" long inclined belt with 2" high cleats on 4¼" centers and a 74" discharge height. 18" OD product sorting disc, 12" long x ½" wide container spacing belts and rotary pocket style canister dispenser. AB PanelView Plus 600 controls and control dials for spacing belt, elevator drive, preorienter drive and spacing drive. Mounted on stainless steel base frame with casters. Change parts required for different size canisters.

OAD: 103"L x 40"W x 87"H

Get a Free Quote Call: 630-629-9900

Omega Design Unscrambler Bulk Plastic OS572

  • Manufacturer: Omega Design
  • Model Number: OS572
  • Frain Number: 5G7339

Omega Design, Model OS5-72, automatic, stainless steel, low profile, bulk plastic bottle unscrambler. Rated from 20 to 300 containers per minute – depending on materials and application. Container size range: 1oz to 1 gallon and capable of orienting round, square, rectangular, oval, tapered and f-style containers with proper change parts. Equipped with floor level 38" long x 58" wide x 24" deep stainless steel feed hopper with 52" long vertical travel and 96" long horizontal travel x 17" wide incline cleated feeder belt with 3" high cleats on 12" centers, 60" OD sorting bowl with a non scuffing nylon face, (3) spring loaded 1¼" wide belts: 18" long transfer belt, 48" long spacing / orientation belt and 32" long discharge belts. Control panel has variable speed dials, start and e-stop push button controls. Mounted on stainless steel base frame with lexan safety guarding.

OAD: 193"L x 77"W x 77"H

Get a Free Quote Call: 630-629-9900

Omega Design Feeder Desiccant DF-1D1

  • Manufacturer: Omega Design
  • Model Number: DF-1D1
  • Frain Number: 5F7733

Omega Design Model DF-1D1, free standing portable stainless steel, desiccant feeder capable of single, double, or triple drop feeding of a 1gram to 3 gram "barrel" style desiccants into containers at speeds from 50 to 300 barrels per minute on 1 drop – depending on materials and application. Equipped with 12" diameter x 15" deep stainless steel product hopper with cover, 10" diameter adjustable feed wheel and container orienter with container and desiccant verification eyes, adjustable drop height currentlt at 38" discharge height. Control panel with PLC controller start, stop and up, down push button controls, mounted on stainless steel base with casters. Change parts required for product changes.

OAD: 36" x 36" W x 80" H

Get a Free Quote Call: 630-629-9900

Omega Design Unscrambler Bulk Plastic 1.5D-LP-CR

  • Manufacturer: Omega Design
  • Model Number: 1.5D-LP-CR
  • Frain Number: 5F7726

Omega Design Model 1.5D-LP-CR, stainless steel, bulk bottle unscrambler rated from 10 to 100 containers per minute – depending on materials and application. Equipped with 40" long x 34" wide x 38" deep stainless steel product hopper with safety guarding and flip top and side single access doors, 36" long incline to 26" long horizontal run with 4" wide neopreme conveyor belt with 2" high cleats set on 4" centers and 47" discharge height, capable of handling a wide variety of sizes and shapes, feeding into the unscrambler with 18" OD disc style sorting bowl with chute to 12" diameter 12 pocket rotary product dichischarge. Control panel has A/B CPU controller with main drive, pre-orientaor and elevator speed dial controls and e-stop,

OAD: 48" L x 36" W x 50" H Unscrambler
52" L x 48′ W x 91" H Incline Feeder

Get a Free Quote Call: 630-629-9900