Urschel Machines

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor AFFINITY

• Manufacturer: Urschel
• Model Number: AFFINITY
• Frain Number: R40251

Urschel, Model Affinity, Stainless steel dicer, has the ability to process high-fat, coldtemperature, and otherwise normally difficult products, with the amount of product per hour – depending on materials, application and machine configuration. Slice thickness 1/8 – 3/4" (3.2 – 19.1 mm), crosscut 1/8 – 2" (3.2 – 50.8 mm) and circular knife spindles 1/8 – 3" (3.2 – 76.2 mm) for a full range of dices, crumbles / granulations. Equipped with a 16" x 14½" x 17" deep infeed hopper that accepts products up to 7" (178 mm), built-in feed assists in feeding and orientation of product with 25 HP drive and 13" x 22" discharge chute with 14½" ground clearance. Control panel has push button start / stop and variable speed dial. Mounted on stainless steel frame.

OAD: 56"L x 63"W x 69"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor DIVERSACUT2110

• Manufacturer: Urschel
• Model Number: DIVERSACUT2110
• Frain Number: R40430

Urschel, Model Diversacut 2110, 304 stainless steel, dicer, slicer, strip cutter used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 19¼" x 13½" product charge with a 80" high charge, swing open locking access door with safety interrupt switch, crosscut and circular knifes that accept product up to 10" in any dimension and 19¾" x 14" discharge chute with 40½" floor clearence. Control panel has start, stop and e-stop push button controls with 10 Hp stainless steel motor drive. Mounted on stainless steel base frame.

OAD: 79"L x 59"W x 82"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor RAA

• Manufacturer: Urschel
• Model Number: RAA
• Frain Number: 5J3793

Urschel, Model RAA, Stainless steel USDA approved cutter. Capable of slices, dices, and strip cuts at speeds from 2500 to 5000 lbs. per hour. Equipped with 14" x 15" product infeed and 7" wide product discharge with 26" discharge height. Unit is capable of cutting up to a 3½" diameter log of product. Unit consists of slicing knife capable of 1/16" to 3/8" cuts, circular knife capable of 1/8" to 1" cuts, and crosscut knives capable of 1/16" to 1½" cuts. To cut different size pieces change parts are needed per application. Slicing also requires a change part. Unit mounted on stainless steel base. Last running in a bread operation. Change parts required to accommodate size range.

OAD: 58"L x 45"W x 68"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor DIVERSACUT2110

• Manufacturer: Urschel
• Model Number: DIVERSACUT2110
• Frain Number: R39510

Urschel, Model Diversacut 2110, stainless steel, dicer, slicer, strip cutter with inclined feeder used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 35" x 27" product charge with a 84" high charge, swing open locking access door with safety interrupt switch, crosscut and circular knifes that accept product up to 10" in any dimension and 10" x 14" discharge chute with 32" floor clearence. Control panel has start, stop and e-stop push button controls with 5 Hp stainless steel motor drive. Mounted on stainless steel base frame.

OAD: 60"L x 55"W x 84"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor SPRINT

• Manufacturer: Urschel
• Model Number: SPRINT
• Frain Number: R39050

Urschel, Model Diversacut Sprint, Stainless steel, dicer, slicer, strip cutter with inclined feeder used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 16" x 17" product hopper with 61" high in feed, swing open locking access door with safety interrupt switch, crosscut and circular knifes that accept product up to 6½" in any dimension and 10" x 20" discharge chute with 15½" floor clearence. Control panel has start, stop and e-stop push button controls. Mounted on stainless steel (4) leg frame with locking casters.

OAD: 55"L x 55"W x 65"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor RAA

• Manufacturer: Urschel
• Model Number: RAA
• Frain Number: R19232

Urschel Model RAA stainless steel dicer / strip cutter able to process a variety of fruits, vegetable and processed meats. Maximum product input 3.5" in any direction. Rates dependent on materials, application and machine configuration. Change parts required to accommodate size range.

Slice knife thickness: 1/16 to 3/8"
Slitter cuts: 1/8 to 1"
Crosscut cuts: .05 to 3"

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor AFFINITY

• Manufacturer: Urschel
• Model Number: AFFINITY
• Frain Number: R38951

Urschel, Model Affinity, Stainless steel dicer, has the ability to process high-fat, coldtemperature, and otherwise normally difficult products, with the amount of product per hour – depending on materials, application and machine configuration. Slice thickness 1/8 – 3/4" (3.2 – 19.1 mm), crosscut 1/8 – 2" (3.2 – 50.8 mm) and circular knife spindles 1/8 – 3" (3.2 – 76.2 mm) for a full range of dices, crumbles / granulations. Equipped with a 10½" x 14" x 17" deep infeed hopper that accepts products up to 7" (178 mm), built-in feed assists in feeding and orientation of product with 25 HP drive and 12" x 13" discharge chute with 24" ground clearance. Control panel has push button start / stop and variable speed dial. Mounted on stainless steel frame with casters.

OAD: 68"L x 60"W x 69"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor AFFINITY

• Manufacturer: Urschel
• Model Number: AFFINITY
• Frain Number: R38950

Urschel, Model Affinity, Stainless steel dicer, has the ability to process high-fat, coldtemperature, and otherwise normally difficult products, with the amount of product per hour – depending on materials, application and machine configuration. Slice thickness 1/8 – 3/4" (3.2 – 19.1 mm), crosscut 1/8 – 2" (3.2 – 50.8 mm) and circular knife spindles 1/8 – 3" (3.2 – 76.2 mm) for a full range of dices, crumbles / granulations. Equipped with a 10½" x 14" x 17" deep infeed hopper that accepts products up to 7" (178 mm), built-in feed assists in feeding and orientation of product with 25 HP drive and 12" x 13" discharge chute with 24" ground clearance. Control panel has push button start / stop and variable speed dial. Mounted on stainless steel frame with casters.

OAD: 68"L x 60"W x 69"H

Urschel M Dicer, Shredder and Strip Cutter

• Manufacturer: Urschel
• Model Number: M
• Frain Number: 5J2621

Urschel, Model M, stainless steel, belt fed, dicer, shredder and strip cutter. Capable of production rates from 500 to 4,500 Ibs per hour – depending on materials and application. Capable of strip cuts from 3/16″ to 3″ and cross cuts from 1/8″ to 4″. Equipped with 29″ x 9 1/2″ …

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor M

• Manufacturer: Urschel
• Model Number: M
• Frain Number: 5J2621

Urschel, Model M, stainless steel, belt fed, dicer, shredder and strip cutter. Capable of production rates from 500 to 4,500 lbs per hour – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 29" x 9½" load area on feed belt and 11½" x 16" discharge chute with 16" ground clearance. Control panel with start and stop push buttons controls. Mounted on (4) leg stainless steel frame with casters.
Change parts are needed to accommodate size range changes.

OAD: 106"L x 43"W x 55"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor 1700

• Manufacturer: Urschel
• Model Number: 1700
• Frain Number: R31280

Urschel, Model 1700 Comitrol, stainless steel, reduction mill for free flowing dry and semi-dry product with number of pounds of product per hour – depending on materials and application. Equipped with 12" ID x 16" Deep double cone product hopper with 5"diameter feed throat, 6" diameter x 3" deep milling chamber with (4) 2½" dog leg style high-speed rotating impeller and cutting head with vertical blades, 20" diameter product discharge with 25" floor clearance. Powered by a 15 Hp motor drive. Control panel has push botton start / stop controls. Mounted on stainless steel base frame with casters. Operations include communiting, granulating, milling, slicing, liquifying, dispersing, and pureeing. Change parts required per application.

OAD: 45"L x 36"W x 28"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor RA

• Manufacturer: Urschel
• Model Number: RA
• Frain Number: 5D3561

Urschel Model RA, stainless steel dicer and slicer for a variety of food products with volumes per hour -depending on materials, application and machine configuration. Size range: 1/16" to 3/8" Slicing Knife; 1/8" to 1" Circular Knife; 0.05" to 3" Crosscut Knife. Accepts products up to 3-1/2" in any dimension. Equipped with feed hopper, discharge chute and lift off safety guarding. Able to "strip cut" with removal of crosscut knife. Mounted on (4) leg frame. Change parts required per application.

OAD: 48" L x 48" W x 60" H