Urschel Machines

About Urschel Equipment

Frain Industries has many Urschel machines in stock and ready to ship including dicers, slicers, shredders, Comitrol mills and other food processing and food cutting machinery.  We have Urschel machines for many applications including meat, dairy, vegetables, fruits, nutraceuticals, pharmaceuticals, chemical and others.


Urschel Machines In Stock

Urschel Cutter, Slicer Chopper/Processor M

  • Manufacturer: Urschel
  • Model Number: M
  • Frain Number: R23071

Stainless steel, USDA approved belt fed dicer & strip cutter capable of production rates to 4500 lbs/hr – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 32" x 9" load area on feed belt and adjustable feed roll allowing for positive product feed at all thicknesses from 3/8" to 1". Mounted on a S/S frame. Change parts required to accommodate configurations / size range.

OAD: 108"(L) x 31"(W) x 67"(H)

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Slicer CC

  • Manufacturer: Urschel
  • Model Number: CC
  • Frain Number: 5G5270

Urschel Model CC, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm. V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts (See Lite) sizes. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed inexpensive throw away knife change parts. Equipped with 8" deep stainless steel feed hopper with a 9"ID product charge, 17" diameter discharge chute with 37" ground clearance and is mounted on a stainless steel base frame with casters. Change parts required to accomodate application range.

OAD: 46" L x 35" W x 62" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Slicer OV

  • Manufacturer: Urschel
  • Model Number: OV
  • Frain Number: 5G6210

Urschel, Model OV, automatic USDA slicer for uniform crosscut slicing of elongated food products. Will accommodate products up to 2¾" in diameter. Will produce flat slices from 1/16" to 1¾" thick. Capable of flat or crinkle slices. Change parts required to accommodate size / cut range. Equipped with a 50" long v-belt infeed, 2½" wide product hold down belt and 8" diameter discharge with 25" ground clearance.

OAD: 72"L x 24"W x 54"H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor G

  • Manufacturer: Urschel
  • Model Number: G
  • Frain Number: 5G2360

Urschel Model G, stainless steel dicer / slicer / cutter for a variety of food products with volumes per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Continuous motion for uninterupted production and accept products up to 5-1/2"in any dimension. Product is fed thru hopper into a rotating impellor into the blades. Equipped with stainless steel feed hopper, 19" x 15" in feed opening discharge chute, with lift off safety guarding start / stop buttons controls and is mounted on stainless steel base frame. Change parts required for size changes. Currently set with circular knives spindle set up for 1/2" Crosscut knives spindle set up for 3/8".

OAD: 58"L x 42"W x 40"H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor 1700

  • Manufacturer: Urschel
  • Model Number: 1700
  • Frain Number: R27660

Urschel Model 1700 Commitrol, stainless steel, reduction mill for free flowing dry and semi-dry product with number of pounds of product per hour – depending on materials and application. Equipped with 12" ID x 12" Deep product hopper 17" OD x 17" milling chamber with (3) 3" dog leg style high speed rotating impeller and cutting head with vertical blades and 4-1/2" OD triclover product inlet and 3-1/2" triclover product discharge with 30 Hp motor drive. Control panel has push botton start, stop, auto and manual control switches. Mounted on stainless steel base frame. Operations include communiting, granulating, milling, slicing, liquifying, dispersing, and pureeing.

OAD: 48" W x 33" L x 66" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor DIVERSACUT2110

  • Manufacturer: Urschel
  • Model Number: DIVERSACUT2110
  • Frain Number: R26810

Urschel Model Diversacut 2110, stainless steel, dicer, slicer, strip cutter with volumes per hour – depending on materials and application. Equipped with 19" long x 13-12′ wide product hopper with (10) 3-1/2" high rotating feed impellers set on 6" centers and has swing open locking access door with safety interrupt switch, has crosscut and circular knifes and accepts product up to 10" in any dimension and has 20" long x 14" wide discharge chute with 17" floor clearence. Control panel has start, stop and e-stop push button controls with 10 Hp stainless steel motor drive. Mounted on stainless steel base frame.

TYPES OF CUTS RANGE
SLICES: flat slices 1/16 to 1" crinkle slices 1/8" to 1"

STRIP CUTS : flat and crinkle minimum / maximum
Flat strips 1/8 x 1/8" to 1" x 1" x length of product.
Crinkle strips 9/32 x 9/32" to 5/8" x 5/8" x length of product.

DICES:
Circular knife cuts: 1/8" to 3"
Crosscut knife cuts: 1/8" to 1-1/2"
Crosscut knife crinkle cuts: 9/32" to 5/8"
Change parts required to accommodate size ranges

OAD; 55" L x 45" W x 47" H without casters
55" H with casters

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor DIVERSACUT2110

  • Manufacturer: Urschel
  • Model Number: DIVERSACUT2110
  • Frain Number: R26811

Urschel Model Diversacut 2110, stainless steel, dicer, slicer, strip cutter with volumes per hour – depending on materials and application. Equipped with 19" long x 13-12′ wide product hopper with (10) 3-1/2" high rotating feed impellers set on 6" centers and has swing open locking access door with safety interrupt switch, with crosscut and circular knifes and accepts product up to 10" in any dimension, and 8" long x 7" wide discharge chute with 9" floor clearence. Control panel has start, stop and e-stop push button controls with 10 Hp stainless steel motor drive. Mounted on stainless steel base frame. Currently set with crosscut spindle for 1" and circular spindle for 1/2" cuts.knifes

TYPES OF CUTS RANGE
SLICES: flat slices 1/16 to 1" crinkle slices 1/8" to 1"

STRIP CUTS : flat and crinkle minimum / maximum
Flat strips 1/8 x 1/8" to 1" x 1" x length of product.
Crinkle strips 9/32 x 9/32" to 5/8" x 5/8" x length of product.

DICES:
Circular knife cuts: 1/8" to 3"
Crosscut knife cuts: 1/8" to 1-1/2"
Crosscut knife crinkle cuts: 9/32" to 5/8"
Change parts required to accommodate size ranges

OAD; 55" L x 45" W x 47" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor GA

  • Manufacturer: Urschel
  • Model Number: GA
  • Frain Number: 5G2528

Urschel Model GA, stainless steel USDA, dicer / slicer / cutter with volumes per hour – depending on materials and application. Equipped with slice, crosscut, and circular knifes with ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular with proper change parts and accepts product up to 5-1/2" in any dimension, with start / stop / e-stop button controls. Mounted on stainless steel base frame. Crosscut spindle set up for 1/4" and circular spindle set up for 3/8" cuts.

OAD: 62"L x 36"W x 44"H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor DIVERSACUT2110

  • Manufacturer: Urschel
  • Model Number: DIVERSACUT2110
  • Frain Number: R26070

All S/S dicer uniformly dices, strip cuts, and slices a wide variety of products at high production capacities, and accepts products up to 10" in any dimension. Types of cuts slices: flat & crinkle slices: 1/16 to 1" Strip cuts: flat and crinkle minimum/maximum flat strips 1/8 x 1/8" to 1 x 1" x length of product. Crinkle strips 9/32 x 9/32" length of product.
Circular knife cuts: 1/8 to 3"
Crosscut knife cuts: 1/8 to 1-1/2"
Crosscut knife crinkle cuts: 9/32 to 5/8"
Change parts required to accommodate size range.

OAD: 71"L x 64"W x 63"H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor SLA

  • Manufacturer: Urschel
  • Model Number: SLA
  • Frain Number: R26590

Urschel, Model SL-A, stainless steel dicer / slicer / cutter for a variety of food products with volumes per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with ranges: up to 1/2" Slice Thickness, 1/8" to 3" Crosscut, 1/8" to 2" Circular. Continuous motion for uninterrupted production and accept products up to 4" in any dimension. Product is fed thru corrugated feed drum and opposing feed spindle transfer slices to the circular and crosscut knife. Equipped with 20" long x 20" wide x 14" deep feed hopper, 8" x 18" discharge chute with 20" ground clearance, lift off safety guarding Control panel with start / stop / reset push buttons controls. Mounted on stainless steel base frame. Change parts required for size changes. Currently set with 1/2" tooling.

OAD: 64" L x 54" W x 64" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Slicer CC

  • Manufacturer: Urschel
  • Model Number: CC
  • Frain Number: R26520

Urschel Model CC, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts (See Lite) sizes. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed throw away knives inexpensive to replace. Accept products up to 3-3/4" in any dimension. Equipped with stainless steel feed hopper, discharge chute, start / stop buttons controls and is mounted on stainless steel base frame. Change parts required to accomodate application range.

OAD: 48" L x 30" W x 43" H Without Casters
48" H With Casters

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor GA

  • Manufacturer: Urschel
  • Model Number: GA
  • Frain Number: 5G2532

Urschel, Model GA, stainless steel USDA, dicer / slicer / cutter with volumes per hour – depending on materials, application environment and machine configuration. Equipped with slice, crosscut, and circular knifes with ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular with proper change parts. Accepts product up to 5½" in any dimension. Equipped a 15" x 19" feed opening, 13" x 8" discharge with 23" ground clearance, start / stop buttons, E-stop and mounted on a stainless steel base frame.

OAD: 62"L x 36"W x 44"H

Get a Free Quote Call: 630-629-9900
1 2 3 5