Used Blower Equipment
20 Blower machines IN-STOCK!

More Photos: 2

Industrial, radial curved, arrangement 9, carbon steel blower rated up to 1200 cfm with static pressures up to 22"WG - depending on application. Equipped with a 19-1/8" diameter curved radial steel blade, 10 hp drive, and a flanged 13-1/2" OD / 10-3/4" ID side discharge.

OAD: 49"L x 40"W x 57"H

More Photos: 2

25 Hp, vacuum blower rated up to 65 scfm - depending on materials and application. Equipped with a 9" OD / 4.5" ID flanged inlet, 12" diameter x 32" long holding tank, and a 9" OD / 4.5" ID flanged discharge. Mounted on a 54" long x 50" wide base with fork lift runners. 10.2 hours on counter.

OAD: 50" L x 54" W x 44" H

More Photos: 2

25 Hp, vacuum blower rated up to 65 scfm - depending on materials and application. Equipped with a 9" OD / 4.5" ID flanged inlet, 12" diameter x 32" long holding tank, push button control panel, and a 9" OD / 4.5" ID flanged discharge. Mounted on a 54" long x 50" wide base with fork lift runners. 10.2 hours on counter.

OAD: 50" L x 54" W x 44" H

More Photos: 2

Positive displacement blower rated up to 64 scfm - depending on materials and application. Displacement: 0.060 feet per revolution. Pressure rating: up to 7 psig. Equipped with 2" diameter inlet /outlets. Mounted on a 36" long x 24" wide base frame.

OAD: 46" L x 30" W x 44" H

20 hp, single stage, centrifugal blower rated from 50 to 1,200 scfm - depending on materials and application. Flow rates: 85 to 2,050 m³/h. Pressure rating: up to 9.75 psig (0.67 bar). Vacuum rating: up to 12 Hg. Equipped with a Universal silencer and 11" OD / 6" ID flanged inlet / outlets. Mounted on a 60" long x 30" wide platform.

OAD: 60" L x 30" W x 98" H

More Photos: 2

7.5 hp, positive displacement blower rated up to 950 scfm - depending on materials and application. Fan wheel size: 15.25" in Diameter. Shaft size: 1.1875" in Diameter. Rpm. 3450. Equipped with 6" ID / 8.5" OD flanged inlet and outlet with 16" long muffler. Mounted on a 36" x 36" base.

OAD: 52" L x 36" W x 44" H

Industrial, radial paddle, carbon steel blower. Has a 35" dia centrifugal fan, 15hp drive, and a 20" x 18" flanged outlet , 20" dia duct inlet, arrangement nine "9H", right hand motor, clock wise top up discharge. Ideal for use in
general industrial applications.

OAD: 60"L x 65"W x 60"H

More Photos: 2

Horizontal package blower with a reliance 50 hp motor to V-belt & pulley drive. Has a maximum rating of 1800 rpm, 820cpm@10psi Includes outlet silencer and inlet filter housing, has 10" OD & 5" ID inlet / outlet, unit mounted on a carbon steel base frame.

OAD: 86" L x 50" W x 84" H

More Photos: 2

Horizontal package blower with a reliance 50 hp motor to V-belt & pulley drive. Has a maximum rating of 1800 rpm, 820 cfm@10psi Includes outlet silencer and inlet filter housing, has 10" OD & 5" ID inlet / outlet, unit mounted on a carbon steel base frame.

OAD: 86" L x 50" W x 84" H

More Photos: 2

Industrial, centrifugal, blower with airfoil wheel, recommended for clean air applications, is capable of up to 2385 cfm at 6" SP (static pressure), Has 11" diameter centrifical fan, and a 10 1/2" L x 9 1/2" W flanged inlet with (1) 3/8" bolt holes on 4" centers, 20 hp belt drive motor and is mounted platform style base frame.

OAD: 48" L x 36" W x 48" H

More Photos: 2

Positive pressure blower package complete with cyclone and regenerative blower rated at 1750 rpm, 8.0 INHGG, 2.5 BHP, 12 psi and 140 ICFM.

OAD: 50"L x 28"W x 30"H

More Photos: 1

High pressure blower rated at 84 scfm, 158 iwg (inches water gauge) and 9.7" of vacuum. Cast aluminum housing mounted on steel frame

OAD: 20"l x 22"W x 38"H

More Photos: 2

Pressure/vacuum conveyor with 2 rotary lobe blowers. Dresser 409 JH RCS whispair. 406 RCS H whispair. Dual 30 hp motors. 406 min-max is 145-583 cfm (4.13-16.5 cubic meters/min) @ 1750-4000 rpm on pressure and 159-604 cfm (4.5-17.1 cubic meters/min) @ 1750-4000 rpm on vacuum. The 409 has 221-875 cfm (6.25-24.7 cubic meters/min) @ 1750-4000 rpm on pressure and 242-906 cfm (6.85-25.65 cubic meters/min) @ 1750-4000 rpm on vacuum. Includes a shell and tube heat exchanger used to cool down products that can become tacky when heated with 250 psi (17.2 bar) max shell pressure, 150 psi (10.3 bar) max tube pressure and 350 Deg F. (176 Deg F.) max. operating temp. Unit is mounted on a common steel frame. Last used to convey sugar and wheat flour in a food operation.

OAD: (H) 88" x (W) 48" x (L) 80"

More Photos: 1

Heavy duty rotary positive displacement blower which discharges a constant volume. Blower consists of two figure-eight impellers mounted on parallel shafts. These shafts rotate in opposite directions within an elongated cylindrical housing. As each impeller lobe passes the inlet, the impeller traps a constant volume of air, carries it around the case, and discharges it at the outlet. This cycle repeats four times with every complete revolution of the drive shaft. Unit is mounted on baseplate for the blower and driver, v-belt drive with guard, coupling drive with guard, driver, relief valve, inlet filter and 2 Universal silencers. OAD: 7'L x 4'W x 7"H

The Shick tube-veyor system has a maximun rating of 1770 rpm, 15 hp blower, max amb: temp. of 40 deg. C. Has 3" dia. inlet and outlet. Includes inlet silencers and inlet filter housing. Silencer

OAD: 55"L x 25"W x 30"H.

Horizontal Medium Vacuum Package Blower System. Consists Of Inlet & Outlet Silencers With Inlet Filter Housing, Blower & V-Belt & Pulley Drive Mounted On A Common Frame. The Model 5mf Has 4" Dia Threaded Ports W/Rated Displacement Per Rev Of 0.210 Cu Ft. Unit Has Max Rating Of 14"Hg @ 377 Cfm And 15.7 Bhp. Lower Ratings Are Attainable With Slower Pump Rpm'S And Lower Pop Off Ratings.

Oad: 47"L X 26"W X 89"H

Horizontal Package Blower On Carbon Steel Frame With 30 Hp Motor To V-Belt & Pulley Drive. Package Manufactured By Buhler-Maig Fluidlift Systems. 4" Diameter Inlet & Oulet Ports.

Oad: 65" L X 30" W X 47" H

More Photos: 4

More Photos: 2

Industrial, radial paddle, arrangement 1, carbon steel blower rated up to 5500 cfm with static pressures to 13"WG - depending on application. Equipped with a 33" diameter flat rotatable and reversible radial steel blade, 19.1 hp drive, and a flanged 22" OD / 18-1/2" ID side discharge.

OAD: 55"L x 65"W x 76"H

More Photos: 2

Industrial, radial paddle, arrangement 1, carbon steel blower rated up to 5500 cfm with static pressures to 13"WG - depending on application. Equipped with a 33" diameter flat rotatable and reversible radial steel blade, 19.1 hp drive, and a flanged 22" OD / 18-1/2" ID side discharge.

OAD: 55"L x 65"W x 76"H