Canning Machines

Used Canning Equipment

Canning equipment refers to the different kinds of machinery that can be used in to the processing of canned products. Canning machines include finishing equipment designed to prepare different products prior to canning the product. The operation of finishing equipment can be sifting or screening, or some other process needed to make products suitable for further processing.

Canning equipment also includes retort equipment that is designed to retort or sterilize products that has already been packages in cans or other container. Retort equipment uses hot water or steam to evenly heat product to a certain temperature for a certain amount of time, a process often called pasteurization.

Contact Us

Canning Equipment In Stock

Langsenkamp Canning Finishers B-FIN

  • Manufacturer: Langsenkamp
  • Model Number: B-FIN
  • Frain Number: 5F8924

Langsenkamp Model B-FIN product finisher with gallons per day and size microns can go down to are – depending on materials and application. Equipped with all stainless steel contact parts 24" long and 20" diameter chamber with 4 paddles 24" long x 20" wide x 3" thick. and takes 24" long screens, 40" long x 40" wide x 12" deep stainless steel bolt down removable product hopper, 10 Hp main drive with with 4 pulley gear drive system and Crepaco 5 Hp centrifugal bottom mounted product discharge pump with 2-1/2" OD, 1-1/2" ID inlets / outlets and mounted on 4 leg stainless steel base frame

OAD: 48" L x 36" W x 69" H

Get a Free Quote Call: 630-629-9900

Reid Boiler Works Inc Canning Retort Baskets 2 BASKET

Reid Boiler Works, inline, 2 basket, batch retort, cooking, sterilizer and cooling system. Chamber dimensions: 60" in Diameter x 132" in Length. 40 psi @ 450 Deg F. because of the excellent temperature distribution National Board Rated. Baskets Not Included.

Option: (2) additional Reid 2 basket retort are Available at Additional Cost

OAD: 156" L x 84" W x 80" H

Get a Free Quote Call: 630-629-9900

Solbern Canning LCB

  • Manufacturer: Solbern
  • Model Number: LCB
  • Frain Number: 5H1058

Solbern Model LCB stainless steel, in-line free standing self driven economic briner designed for running one or various size containers on the same line with containers per minute – depending on materials and application. Equipped 58" long x 10" wide x 10" high stainless steel top product tank and with 168" long single 1/4" OD rubber container belt, with guide rails, containers are angled to regulate head space for accurate fills and slight over flow. thru and before leaving the fill area and has 83" long x 24" wide x 16" high bottom stainless steel overflow tank with perforated particle panels. All stainless steel sanitary piping and Waukehaw 130 PD pump.

OAD: 168" L x 56" W x 83" H

Get a Free Quote Call: 630-629-9900

Solbern Canning LSB

  • Manufacturer: Solbern
  • Model Number: LSB
  • Frain Number: 5H1059

Solbern Model LSB stainless steel, in-line seamer-driven briner designed for high speed brining and saucing or the addition of any free-flowing liquid such as broth, to pre-filled container without spillage with number of containers per minute – depending on materials and application. Equipped 58" long x 10" wide x 10" high stainless steel top product tank with 60" long feed screw thru fill zone, containers are angled to regulate head space for accurate fills and slight over flow before leaving. Has 78" long x 19" wide x 16" high bottom stainless steel overflow tank with perforated particle panels. Prior to exiting the feed screw containers are spaced to the precise seamer pitch and are picked up by the seamer chain, providing a smooth transfer without spillage. All stainless steel sanitary piping and Waukehaw 130 PD pump.

OAD: 126" L x 43" W x 80" H

Get a Free Quote Call: 630-629-9900

Langsenkamp Canning Finishers 1500

  • Manufacturer: Langsenkamp
  • Model Number: 1500
  • Frain Number: 5G7322

Langsenkamp, Model 1500, finisher with gallons per hour and size microns – depending on materials and application. Equipped with all stainless steel contact parts 29" long and 25" diameter chamber with 4 paddles, 3½" OD / 3" ID Tri-clamp style charge port, 4¾" OD / 4" ID bottom liquid discharge and 10" x 3½" front pulp discharge. Powered by a 15 Hp main drive and mounted on a 4 leg base frame.

OAD: 63"L x 36"W x 51"H

Get a Free Quote Call: 630-629-9900

Langsenkamp Canning Finishers 144

  • Manufacturer: Langsenkamp
  • Model Number: 144
  • Frain Number: 5G4076

Langsenkamp Model 144, pulper. Product is fed into 16.5" x 12" product hopper and brought into the product chamber with 4" long auger then broken apart by 11" diameter impeller. the in feed end of the product chamber has 12" diameter. Pulp then moves across a 19" long screen section. The discharge end of product chamber has 16" diameter. (1) 4.5"OD / 3"ID seated thread fitting with 11" ground clearance connected to 5Hp tri-clover centrifugal pump for finished product. Pulp is ejected from 8" x 3" opening on the face. Equipped with (4) 17" long x 3" wide x .5" thick processing paddles powered by 7.5 Hp drive. Mounted on four leg base frame.

OAD: 67" L x 38" W x 61" H

Get a Free Quote Call: 630-629-9900

Edlund Canning 625

  • Manufacturer: Edlund
  • Model Number: 625
  • Frain Number: 5G4078

Edlund Model 625 air powered heavy duty crown punch can opener. Equipped with removable hardened steel square blade, 9" x 9" for 5-gallon square containers. Hand cranked height adjustment. All Stainless steel frame mounted on a 72"long x 45"wide x 32"high stainless steel table with 1" sidesplash.
85 PSI at 1 1/2 – 2 CFM.

OAD: 72"long x 45"wide x 66"high

Get a Free Quote Call: 630-629-9900

Langsenkamp Canning Finishers 1500

  • Manufacturer: Langsenkamp
  • Model Number: 1500
  • Frain Number: 5G4062

Langsenkamp, M1500, stainless steel product finisher. Product is fed through a 2.5" OD / 1.75" ID tri-clamp style fitting. In feed end of the product chamber has 16" diameter. Pulp then moves across 26" long screen section. The discharge end of product chamber has a 21" diameter. (1) 3" OD / 2.25"ID tri-clamp fitting with 19" ground clearance for finished product. Pulp is ejected from a 11.5" x 3.5" opening on the face. Equipped with (4) 28" long x 3.75" wide x 1" thick processing paddles powered by 20 HP drive. Mounted on four leg base frame.

OAD: 67" L x 38" W x 61" H

Get a Free Quote Call: 630-629-9900

LaGarde Autoclaves Canning Retort Baskets BASKET

LaGarde Model 5 basket, inline, batch, cooking, sterilizing and cooling retort system rated from 3,580 to 16,500 litre batch capacity with number of product per hour – depending on materials and application. Chamber dimmensions: 280" in Length; 72" in Diameter; with MAWP of 72 psi @ 350 Deg F, and MDMT of 32 Deg F @ 72 psi. Temperature probes, with temperature gauge and monitoring system. Hydraulic swing open door has lighted site port and drive. Control package with door open, close, spray nozzle on, off and door # 1, # 2 enable switches with door ready unlock and e-stop push buttons. (3) track basket load and unload rail system 40 Hp blower fan motor drive with pneumatic and voltage control junction boxes and mounted on cradle style base frame. Ideal for processing tinplate, aluminum cans, glass jars and pouches.. National Board # 129.
(3) like units available at additional cost.

OAD: 330" L x 96" W x 120" H

Get a Free Quote Call: 630-629-9900

LaGarde Autoclaves Canning Retort Baskets BASKET

LaGarde Model 5 basket, inline, batch, cooking, sterilizing and cooling retort system rated from 3,580 to 16,500 litre batch capacity with number of product per hour – depending on materials and application. Chamber dimmensions: 280" in Length; 72" in Diameter; with MAWP of 72 psi @ 350 Deg F, and MDMT of 32 Deg F @ 72 psi. Temperature probes, with temperature gauge and monitoring system. Hydraulic swing open door has lighted site port and drive. Control package with door open, close, spray nozzle on, off and door # 1, # 2 enable switches with door ready unlock and e-stop push buttons. (3) track basket load and unload rail system 40 Hp blower fan motor drive with pneumatic and voltage control junction boxes and mounted on cradle style base frame. Ideal for processing tinplate, aluminum cans, glass jars and pouches.. National Board # 146.
(3) like units available at additional cost.

OAD: 330" L x 96" W x 120" H

Get a Free Quote Call: 630-629-9900

LaGarde Autoclaves Canning Retort Baskets SA1700-5

LaGarde Model 5 basket, inline, batch, cooking, sterilizing and cooling retort system rated from 3,580 to 16,500 litre batch capacity with number of product per hour – depending on materials and application. Chamber dimmensions: 280" in Length; 72" in Diameter; with MAWP of 72 psi @ 350 Deg F, and MDMT of 32 Deg F @ 72 psi. Temperature probes, with temperature gauge and monitoring system. Hydraulic swing open door has lighted site port and drive. Control package with door open, close, spray nozzle on, off and door # 1, # 2 enable switches with door ready unlock and e-stop push buttons. (3) track basket load and unload rail system 40 Hp blower fan motor drive with pneumatic and voltage control junction boxes and mounted on cradle style base frame. Ideal for processing tinplate, aluminum cans, glass jars and pouches.. National Board # 127.
(3) like units available at additional cost.

OAD: 330" L x 96" W x 120" H

Get a Free Quote Call: 630-629-9900

Edlund Canning 625T

  • Manufacturer: Edlund
  • Model Number: 625T
  • Frain Number: 5F8917

Edlund Model 625T, heavy duty, stainless steel, air powered, crown punch can opener rated from 300 to 2000 cans per day – depending on materials, application and operator dexterity. Equipped with 8¾" x 8¾" square #A710 tooling and is hand crank height adjustable and mounted on 36" x 36" stainless steel (4) leg base stand with casters.

OAD: 36" L x 36" W x 67" H

Get a Free Quote Call: 630-629-9900