Slicer Machines
Used Slicer Equipment
Cutter Slicer Slicer is a classification of cutting equipment in either a batch or a continuous process for the portion cutting of a variety of food products. Cutter, slicer, slicer is the operation whereby products are sliced to specific thickness shapes or sizes.
These can either plain or crinkle cut or other variation of a slice through a product. The operation is simply a means of feeding materials into equipment where they are sliced to required size for further processing.
Related Categories
Slicer Equipment In Stock
Fitzmill Cutter, Slicer Slicer R
- Manufacturer: Fitzmill
- Model Number: R
- Frain Number: 5H2410
Fitzpatrick, Model R, circular knife slitter. Equipped with a 12" x 12" grated charge, 12" x 3" feed throat, 12" wide x 6" diameter circular knife drum with blades set on ¼" centers, 12" wide x 8" diameter contact drum and 6"ID / 8"OD flanged discharge with 3½" ground clearance.
OAD: 48"L x 36"W x 30"H
Get a Free Quote Call: 630-629-9900
Sormac Cutter, Slicer Slicer KP60 / WOS1A
- Manufacturer: Sormac
- Model Number: KP60 / WOS1A
- Frain Number: 5H1431
Sormac, peeler, topper and segmentor system. Rated from 75 to 85 pieces per minute – depending on materials, application, machine configuration and operator dexterity. Equipped with a model KP60 peeler with a 40" long V-belt infeed and (8) sets of pressure rollers / peeling plates. Peeler discharges into a model WOS-1A topper and segmentor equipped with a 14" wide x 84" long conveyor with flights set on 4" centers, topper / tailer alignment belts, positioning system and static mounted knives. Control panel with push button start / stop, on / off switch and pressure roller adjustment dial.
OAD: 95"L x 30"W x 59"H (Peeler)
107"L x 30"W x 70"H (Segmentor)
CMI Equipment & Engineering Co Cutter, Slicer Slicer CUTTER
- Manufacturer: CMI Equipment & Engineering Co
- Model Number: CUTTER
- Frain Number: 5H1430
CMI Equipment, precision trimmer for topping and tailing. Rated from 20 to 65 count per minute with capacity of over 3,000lbs per hour – depending on materials, application, machine configuration and operator dexterity. Equipped with a 48" long load area, product holders set on 10" centers, automatic adjusting blades, and top hold down wheel through cutting head powered by a 5 hp hydraulic pack. Cutter discharges into a 10" wide x 55" long cleated incline conveyor with 2" high cleats set on 8" centers powered by a ½ hp drive. Feeder discharges onto a 78" long x 36" wide stainless steel cleaning table with (2) operator stations each with a foot pedal operated air blase and 12" diameter waste port.
OAD: 100"L x 47"W x 75"H (Cutter)
60"L x 23"W x 72"H (Feeder)
78"L x 36"W x 43"H (Table)
G J Olney Inc Cutter, Slicer Slicer 4
- Manufacturer: G J Olney Inc
- Model Number: 4
- Frain Number: 5G8523
G J Olney, precision trimmer for topping and tailing. Rated from 20 to 65 count per minute with capacity of over 3,000lbs per hour – depending on materials, application, machine configuration and operator dexterity. Adjusts automatically so that only the ends of the product are trimmed with a minimum of overcut and waste. The product is placed in brass feed fingers, which firmly hold the product to assure a precision cut as it passes through the stainless steel cutting blades. Each blade adjusts automatically and independently of each other for best product recovery. Easy to operate and maintain.
OAD: 80" L x 30" W x 65" H
Get a Free Quote Call: 630-629-9900
G J Olney Inc Cutter, Slicer Slicer 4
- Manufacturer: G J Olney Inc
- Model Number: 4
- Frain Number: 5G8524
G J Olney, precision trimmer for topping and tailing. Rated from 20 to 65 count per minute with capacity of over 3,000lbs per hour – depending on materials, application, machine configuration and operator dexterity. Adjusts automatically so that only the ends of the product are trimmed with a minimum of overcut and waste. The product is placed in brass feed fingers, which firmly hold the product to assure a precision cut as it passes through the stainless steel cutting blades. Each blade adjusts automatically and independently of each other for best product recovery. Easy to operate and maintain.
OAD: 76" L x 29" W x 64" H
Get a Free Quote Call: 630-629-9900
PCCS / A & B Process / JBT Cutter, Slicer Slicer 640
- Manufacturer: PCCS / A & B Process / JBT
- Model Number: 640
- Frain Number: 5G8536
PCCS / A & B Process, heavy duty, stainless steel pneumatic cheese block / barrell cutter. Designed for cutting 640 lb blocks into (16) 40 lb blocks. Equipped with a 37" high curved face cutting head and harp wire assembly, pneumatic bottom drive arm and pneumatic vertical guillotine wire. Rates dependent on materials, application, machine configuration and operator dexterity.
OAD: 102"L x 44"W x 88"H
Get a Free Quote Call: 630-629-9900