Cutter Slicer Machines

Urschel Cutter, Slicer Chopper/Processor RA

• Manufacturer: Urschel
• Model Number: RA
• Frain Number: 5E1790

Urschel Model RA, stainless steel dicer / slicer for a variety of food products. Volumes per hour dependant on materials, application and machine configuration. Size range: 1/16" to 3/8" Slicing Knife; 1/8" to 1" Circular Knife; 0.05" to 3" Crosscut Knife. Accepts products up to 3-1/2" in any dimension. Equipped with feed hopper, discharge chute and lift off safety guarding. Able to "strip cut" with removal of crosscut knife. Change parts required per application. Change parts required to accommodate size range.

OAD: 36" L x 44" W x 66" H

Urschel Cutter, Slicer Chopper/Processor GKA

• Manufacturer: Urschel
• Model Number: GKA
• Frain Number: 5F8953

Urschel Model GK-A dicer / slicer / cutter. Size range: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Accept products up to 5-1/2" in any dimension. Equipped with stainless steel feed hopper, discharge chute and lift off safety guarding. Mounted on stainless steel frame. Rate dependant on materials, application and machine configuration. Change parts required to accommodate size range.

OAD: 60" L x 40" W x 46" H

Sormac Model KP60 Peeler, Topper and Segmentor

• Model Number: KP60 / WOS1A
• Frain Number: 5H1431

Sormac, peeler, topper and segmentor system. Rated from 75 to 85 pieces per minute – depending on materials, application, machine configuration and operator dexterity. Equipped with a model KP60 peeler with a 40″ long V-belt infeed and (8) sets of pressure rollers / peeling plates. Peeler discharges into a model WOS-1A topper and segmentor equipped with a 14″ wide x 84″ long conveyor with flights set on 4″ centers, topper / tailer alignment belts, positioning system and static mounted knives. Control panel with push button start / stop, on / off switch and pressure roller adjustment dial.

OAD: 95″L x 30″W x 59″H (Peeler)
107″L x 30″W x 70″H (Segmentor)

CMI Equipment & Engineering Co Cutter, Slicer Slicer CUTTER

• Manufacturer: CMI Equipment & Engineering Co
• Model Number: CUTTER
• Frain Number: 5H1430

CMI Equipment, precision trimmer for topping and tailing. Rated from 20 to 65 count per minute with capacity of over 3,000lbs per hour – depending on materials, application, machine configuration and operator dexterity. Equipped with a 48" long load area, product holders set on 10" centers, automatic adjusting blades, and top hold down wheel through cutting head powered by a 5 hp hydraulic pack. Cutter discharges into a 10" wide x 55" long cleated incline conveyor with 2" high cleats set on 8" centers powered by a ½ hp drive. Feeder discharges onto a 78" long x 36" wide stainless steel cleaning table with (2) operator stations each with a foot pedal operated air blase and 12" diameter waste port.

OAD: 100"L x 47"W x 75"H (Cutter)
60"L x 23"W x 72"H (Feeder)
78"L x 36"W x 43"H (Table)

CMI Equipment & Engineering Co Cutter, Slicer Slicer MI05

• Manufacturer: CMI Equipment & Engineering Co
• Model Number: MI05
• Frain Number: 5H1433

CMI Equipment, Model MI05, segmentor and leaf cleaner. Equipped with a 19″ wide x 91″ long cleated cradle conveyor with 3″ high cleats set on 6″ centers powered by a ½ hp drive, (5) 12″ diameter cutting blades set on 3″ centers powered by a 3 hp drive and a discharge chute for trimmed ends. Segmentor discharges onto a 16″ wide x 166″ long cleated incline conveyor with 1¼” high cleats set on 8″ centers powered by a 1 hp drive. Segmented product is droped across a perforated chute with a 2 hp blower to remove leaves and small pieces by blowing them up and into a collection chamber. Control panel with push button start / stop and variable speed controls for belt and blades.

OAD: 108″L x 43″W x 88″H (Segmentor)
170″L x 53″W x 97″H (Cleaner)

Urschel Cutter, Slicer Chopper/Processor M

• Manufacturer: Urschel
• Model Number: M
• Frain Number: R23071

Stainless steel, USDA approved belt fed dicer & strip cutter capable of production rates to 4500 lbs/hr – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 32" x 9" load area on feed belt and adjustable feed roll allowing for positive product feed at all thicknesses from 3/8" to 1". Mounted on a S/S frame. Change parts required to accommodate configurations / size range.

OAD: 108"(L) x 31"(W) x 67"(H)

Urschel Cutter, Slicer Slicer CC

• Manufacturer: Urschel
• Model Number: CC
• Frain Number: 5G5270

Urschel Model CC, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm. V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts (See Lite) sizes. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed inexpensive throw away knife change parts. Equipped with 8" deep stainless steel feed hopper with a 9"ID product charge, 17" diameter discharge chute with 37" ground clearance and is mounted on a stainless steel base frame with casters. Change parts required to accomodate application range.

OAD: 46" L x 35" W x 62" H

Urschel Cutter, Slicer Slicer OV

• Manufacturer: Urschel
• Model Number: OV
• Frain Number: 5G6210

Urschel, Model OV, automatic USDA slicer for uniform crosscut slicing of elongated food products. Will accommodate products up to 2¾" in diameter. Will produce flat slices from 1/16" to 1¾" thick. Capable of flat or crinkle slices. Change parts required to accommodate size / cut range. Equipped with a 50" long v-belt infeed, 2½" wide product hold down belt and 8" diameter discharge with 25" ground clearance.

OAD: 72"L x 24"W x 54"H

Urschel Cutter, Slicer Chopper/Processor G

• Manufacturer: Urschel
• Model Number: G
• Frain Number: 5G2360

Urschel Model G, stainless steel dicer / slicer / cutter for a variety of food products with volumes per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Continuous motion for uninterupted production and accept products up to 5-1/2"in any dimension. Product is fed thru hopper into a rotating impellor into the blades. Equipped with stainless steel feed hopper, 19" x 15" in feed opening discharge chute, with lift off safety guarding start / stop buttons controls and is mounted on stainless steel base frame. Change parts required for size changes. Currently set with circular knives spindle set up for 1/2" Crosscut knives spindle set up for 3/8".

OAD: 58"L x 42"W x 40"H

G J Olney Inc Cutter, Slicer Slicer 1

• Manufacturer: G J Olney Inc
• Model Number: 1
• Frain Number: 5F8963

G J Olney precision trimmer for topping and tailing rated from 20 to 65 count radishes per minute with capacity of over 3,000lbs per hour – depending on materials and application. Adjusts automatically so that only the ends of the product are trimmed with a minimum of overcut and waste. The product is placed in brass feed fingers, which firmly hold the product to assure a precision cut as it passes through the stainless steel cutting blades. Each blade adjusts automatically and independently of each other for best product recovery. Easy to operate and maintain.

78" L x 32" W x 52" H

G J Olney Inc Cutter, Slicer Peeler 4-1990

• Manufacturer: G J Olney Inc
• Model Number: 4-1990
• Frain Number: 5F8959

G J Olney precision trimmer for topping and tailing rated from 20 to 65 count onions per minute with capacity of over 3,000lbs per hour – depending on materials and application. Adjusts automatically so that only the ends of the product are trimmed with a minimum of overcut and waste. The product is placed in brass feed fingers, which firmly hold the product to assure a precision cut as it passes through the stainless steel cutting blades. Each blade adjusts automatically and independently of each other for best product recovery. Easy to operate and maintain.

Hobart Cutter, Slicer Chopper/Processor VCM25 QT

• Manufacturer: Hobart
• Model Number: VCM25 QT
• Frain Number: 5E4981

25 qt, vertical, 2-speed chopper / mixer. 304 S/S construction, has a 20" dia x 11" deep product bowl, with electrically locked cover, and handle, 90 deg tilt forward discharge, and accomidates (2-4) S/S knives, depending on application.

OAD: 36" L x 36" W x 40" H