Cutter Slicer Machines

Used Cutter Slicer Equipment

Commercial cutter and slicer equipment is designed to cut, slice, dice, chop, process, peel, and strip cut various different products such as cheeses, meat, vegetables, fruits, breads, pastes. Cutter and slicer equipment covers a number of different types of machines that can be used in the size reduction of a variety of food products. The proper cutter and slicer for the application is based on the product that is to be cut, sliced, or processed, the type of cut, slice, or process needed for the application, and the volume of product that needs to be processed in a given amount of time. Commercial utter and slicer equipment utilize a variety of rotating, spinning, cross-cuting, shredding, and other types of blades and knives to properly process the product.

Contact Us

Related Categories

Cutter Slicer Equipment In Stock

Urschel Cutter, Slicer Slicer OV

  • Manufacturer: Urschel
  • Model Number: OV
  • Frain Number: 5H4180

Urschel, Model OV, automatic USDA slicer for uniform crosscut slicing of elongated food products. with pounds of product per hour – depending on materials and application. Equipped with 50" long v-belt in feed, 2½" wide product hold down belt and 8" diameter discharge with 25" ground clearance.
Will accommodate products up to 2¾" in diameter, and capable of flat or crinkle slices and will produce flat slices from 1/16" to 1¾" thick. Change parts required to accommodate size / cut range. Mounted on (4) leg stainless steel height adjustable base frame.

OAD: 89" L x 27" W x 54" H

Get a Free Quote Call: 630-629-9900

Grote Cutter, Slicer 200A100

  • Manufacturer: Grote
  • Model Number: 200A100
  • Frain Number: 5C2003

Stainless steel, adjustable cheese shredder. Accepts 20 pound blocks of cheese. Rated at 2400 pounds per hour. Equipped with right angle in feed to transport blocks into shredding chamber, top down pressure plate to maintain pressure on block to shredding disk and bottom discharge for shredded product. With hydraulic drive.

OAD = 60" W x 76 L x 102" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor 3630 Processor, 30 Hp

  • Manufacturer: Urschel
  • Model Number: 3630
  • Frain Number: 5E2042

Urschel Model 3630, Automatic, stainless steel, standard cut chopper processor, provides maximum utilization of all types of meat for flaked and formed products with volumes and product rates – depending on product, machine Hp and cutting head. Equipped with 30 Hp drive and 7" diameter cutting head with 8" diameter face plate and 4-3/4" diameter product discharge port. Capable of handling a wide range of cutting heads, for tailor made particle size requirements. Continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Has the capacity to be equipped with a large product hopper and feed system for cutting fresh and frozen tempered meat through a wide range of sizes Change parts required to accommodate size range differences.

OAD: 48" L x 30" W x 49" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor 3630 Processor, 40 Hp

  • Manufacturer: Urschel
  • Model Number: 3630
  • Frain Number: 5E2043

Urschel Model Comitrol 3630, automatic, stainless steel, microcut chopper processor, provides maximum utilization of all types of meat for flaked and formed products with volumes and product rates – depending on product, machine Hp and cutting head. Equipped with 40 Hp drive and 7" diameter cutting head with 8" diameter face plate and 4-3/4" diameter product discharge port. Capable of handling a wide range of cutting heads, for tailor made particle size requirements. Continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Has the capacity to be equipped with a large product hopper and feed system for cutting fresh and frozen tempered meat through a wide range of sizes Change parts required to accommodate size range differences.

OAD: 36" L x 30" W x 47" H

Get a Free Quote Call: 630-629-9900

Convenience Food Systems Cutter, Slicer Chopper/Processor VSM325

Kramer Grebe / Convenience Foods Systems vacuum, bowl chopper mixer for cutting, mixing, and emulsifying product up to 325 liters per batch, depending on application. All 304 stainless steel construction, has a 70" diameter x 40" high (to top of cover) mixing chamber, 9-1/2" top port, with hydraulic lift for cover. Spiral cutting head is capable of using from 2 to 12 blades, currently set-up with 8 blades which can be positioned at angles of both 30 and 60 deg of each other, and has hydraulic loading station for standard product carts. (carts not included). Two speed mixing bowl, and spiral knife motor drives, 28" Diameter hydraulic product un-loader with knife speed and portion controls.

OAD: 130" L x 90" W x 76" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer J9A

  • Manufacturer: Urschel
  • Model Number: J9A
  • Frain Number: R30648

Urschel Model J9-A, belt-fed stainless steel dicer and strip cutter used for a variety of products with volumes per hour – depending on materials and application. Utilizes crosscut and circular knifes with ranges: Product thickness: Up to 1/2", Circular knife cut: 3/16" to 3", Crosscut knife cut: 1/4" to 3". 6"Diam Feed Roll. Dices and strip cuts product such as spinach, greens peppers, citrus peel, celery, broccoli and parsley, frozen temper chicken breast, beef jerky, croutons, pita chips, flour tortillas and brownies. Equipped with a 11" wide x 55" long belt Mounted on stainless steel legs with 40" discharge height. Tooling required per application.

OAD: 90"L x 34"W x 80"H

Get a Free Quote Call: 630-629-9900

PCCS / A & B Process / JBT Cutter, Slicer Slicer 690860902

PCCS / A & B Process, Model 690860902, heavy duty, stainless steel pneumatic cheese block positioner and cutter. Designed for cutting 640 lb blocks down to (16) 40 lb pieces with blocks per hour – depending on materials, application and operator dexterity. Equipped with a 25½" high flat face cutting head and harp wire assembly with (8) 12" x 7" squares, single pneumatic bottom driven arm, pneumatic vertical guillotine wire, 23" wide x 40" long load area, overhead stainless steel product lifting and positioning hoist and roller cart. Controller with start / stop control valves.

OAD: 132"L x 50"W x 64"H (Slicer)
21"L x 47"W x 88"H (Loader)

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor M6

  • Manufacturer: Urschel
  • Model Number: M6
  • Frain Number: R30040

Urschel Model M, stainless steel, belt fed, dicer, shredder and strip cutter designed for meat products and is capable of production rates from 500 to 4,500 lbs per hour – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 32" x 9" load area on feed belt and adjustable feed roll allowing for positive product feed at all thicknesses from 3/8" to 1". Mounted on a stainless steel frame with casters. Change parts are needed to accommodate configurations and size range changes.

OAD: 120"L x 35"W x 50"H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Slicer CCD

  • Manufacturer: Urschel
  • Model Number: CCD
  • Frain Number: R29390

Urschel Model CCD, stainless steel, slicer, strip cutter, shredder and crinkle cutter used for a variety of different food products with production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm, V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts (all with proper change parts). Equipped with centrifical type slicer utilizes rotating impeller to force the product to the side walls and thru (8) individual inter-changeable cutting heads that enable the processor to change the type of cuts in minutes and has inexpensive to replace, specially designed throw away knives. Accept products up to 3-1/2" in any dimension. Stainless steel feed hopper, discharge chute and start / stop push buttons controls. Mounted on push cart with casters

OAD: __" L x __" W x __" H

Get a Free Quote Call: 630-629-9900

Urschel Cutter, Slicer Chopper/Processor G

  • Manufacturer: Urschel
  • Model Number: G
  • Frain Number: R29930

Urschel Model G, stainless steel USDA, dicer / slicer / cutter used for a variety of food products with volumes per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Continuous motion for uninterupted production and accept products up to 5-1/2" in any dimension. Product is fed thru hopper into a rotating impellor into the blades. Equipped with stainless steel feed hopper, discharge chute, with lift off safety guarding start / stop buttons controls. Mounted on stainless steel base frame with casters. Change parts required for different size changes.

OAD: 64"L x 32"W x 60"H

Get a Free Quote Call: 630-629-9900

Vanmark Cutter, Slicer Peeler 2745

  • Manufacturer: Vanmark
  • Model Number: 2745
  • Frain Number: 5D9637

Heavy duty, brush style peeler / scrubber. Equipped with (8) 70" long x 4-1/2" diameter rollers (2 rubber pin and 6 bristle scrub brush), (5) dual paddle tumbling system (8" x 4" paddles), swing-away discharge and automatic lubrication system. Hydraulic drive powered by 20 Hp motor. Stainless steel construction. Mounted on (4) leg base frame.

OAD: 126" L x 36" W x 66" H

Get a Free Quote Call: 630-629-9900

Cutter, Slicer Peeler S-36

  • Model Number: S-36
  • Frain Number: 5D3912

Custom Engineering & Fabrication Co, Model S-36, stainless steel brush peeler. Equipped with a stainless steel inclined belt with 2" high cleats feeding into a 20" x 16" product charge, 16" diameter x 18" long auger moves product into 70" long peeler chamber with (8) rotary brushes, 20" OD single ribbon agitation and top mounted spray nozzels. Product discharges onto a 23" wide chute with 50" ground clearance. Bottom 15" x 8" flanged discharge drains liquid into a Moyno positive diplacement pump powered by a 3 hp drive with a 2½" NPT discharge. Peeler powered by a 7½ hp hydraulic power pack.

OAD: 102"L x 40"W x 80"H (Peeler)
93"L x 48"W x 110"H (Feeder)

Get a Free Quote Call: 630-629-9900