Flow Thru side seal Machines

Cleaner CIP/COP VERSORGUNGSEINHEIT

• Model Number: VERSORGUNGSEINHEIT
• Frain Number: 5G9014

C. A. Neubecker, Model Versorgungseinheit, 3 tank, 304 stainless steel, CIP system. Equipped with (3) 39" long x 27" wide x 20" deep stainless steel 90 gallon tanks, (1) for caustic, (1) for acid and (1) for sanitizer. All have 22" long x 18" wide top lift off covers, flat tops and slant bottoms, side bottom discharges, top return ports, (3) 3 Hp centrifugal pumps, 1½" OD / 1¼" ID stainless steel piping with sanitary couplings, and metering pumps. Mounted on heavy duty stainless steel base frame.

OAD: 98" L x 55" W x 67" H

Sani-Matic Cleaner CIP/COP 1 TANK CIP

• Manufacturer: Sani-Matic
• Model Number: 1 TANK CIP
• Frain Number: R30151

Sani-Matic single tank, 304 stainless steel, sanitary CIP system. Equipped with one 200-gallon single wall holding tank with 18" manway (6) 3-1/2" OD, (1) 2-1/2" OD sanitary top ports and 3" OD sanitary side bottom discharge. Has all stainless-steel tube in shell heat exchanger with 1.5" ID sanitary tube in / outlets, Fristam stainless steel centrifugal pump with stainless steel 10 Hp motor drive. The system has 2" OD stainless steel sanitary piping and fittings, flow meter with read-out, inline filter, air and check valves, temperature sensors and gauges. A/B controller with flow rate and level controls, conductivity meter, solenoids, and breakers. Mounted on 108" long x 48" wide stainless steel platform.

Heat Exchanger
MAWP: 150 PSI @ 375°F
MDMT: -20°F @ 150 PSI

OAD: 108" L x 48" W x 80" H

Klenzade Cleaner CIP/COP CIP

• Manufacturer: Klenzade
• Model Number: CIP
• Frain Number: 5H2948

Klenzade, 304 stainless steel Clean-in-place tank. Equipped with one tank measuring 24" L x 24" W x 28" H (70 gallons) with one 16" x 16" manway, level detector. Ampco, Model 2½x2 DC2, centrifugal pump with a maximum pumping capacity of 230 GPM. Includes chart recorder and tube in shell heat exchange. Unit mounted on stainless steel platform.

Nat’l Brd: 739

Shell
MAWP: 150 PSI @ 375°F
MDMT: -20°F @ 150 PSI

Tube
MAWP: 150 PSI @ 375°F
MDMT: -20°F @ 150 PSI

OAD: 72"L x 55"W x 85"H

A & B Process Systems Cleaner CIP/COP 3 TANK CIP

• Manufacturer: A & B Process Systems
• Model Number: 3 TANK CIP
• Frain Number: 5H0682

A & B Process Systems, Stainless steel, CIP system with rates per hour – depending on materials and application. Equipped with (3) Sani-Fab 32" OD x 56" straight wall, 200 gallon stainless steel single wall tanks (1) for caustic, (1) for acid and (1) for rinse all have flat tops with manways and flip up covers, top return ports and top mounted agitation. Slant side bottoms with end bottom discharges and 9" ID x 60" long single tube heat exchanger. System has all stainless steel piping and sanitary couplings, with flow rate and pressure control valves. Control Panel has A/B PLC and A/B touch pad controls with panel view, e-stop and status light. Mounted on (8) leg stainless steel frame.

OAD: 168" L x 55" W x 101" H

Vector Cleaner CIP/COP WIP SYSTEM

• Manufacturer: Vector
• Model Number: WIP SYSTEM
• Frain Number: 5H0715

Vector, Model WIP System, portable, stainless steel, single tank, clean in place system Rated up to 0 to 20 gallons per minute – depending on materials and application. Equipped with 16" ID x 30" Deep, 25 gallon stainless steel, single wall holding tank with removable cover. Dish bottom has (1) 2" OD sanitary center bottom discharge with 16" floor clearance. System also includes Waukesha Model 20, 2 Hp product transfer pump with 1-1/2" OD top and 1-1/2" OD center in/outlet ports with cleaner and rinse flow meters. Control Panel has A/B controller with Panel view and start / e-stop controls. Mounted on 42" long x 32" wide stainless steel base frame with casters.

OAD: 42" L x 32" W x 57" H