APV Crepaco Tanks Machines


APV Crepaco Tanks Machines In Stock

APV Crepaco Tanks Tank Processors 250GAL

APV Crepaco 250 Gal, stainless steel jacketed mix tank. Vessel dimensions: 60"ID x 25" straight wall. Equipped with bridge mounted, single motion, full sweep agitator, two piece flip up covers with lift handles, (3) 2"ID and (2) 3"ID tri-clamp inlet ports, Full jacket rated to MAWP 100psi @ 350°F, MDMT -20°F @ 100psi. (4) 1-1/2"MNPT with jacket inlet / outlets. Dish bottom has 3"ID tri-clamp center bottom discharge with 18" ground clearance has bottom temperature and diaphragm level probes. Mounted on (4) 24" high stainless steel tubular legs.

Nat’l Board No. 9870

OAD: 67"L x 65"W x 86"H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tanks Tank Processors 300 GALLON

APV 300 gallon, 316 stainless steel mixing tank. Vessle dimensions: 66" Diameter with 32" straight wall. Equipped with dome top, (1) 19" manway with cover and interlock, (1) 16" manway with cover and interlock, 11" wide x 15" long feed port with lift off cover, (1) 3-1/2" port, (1) 5" port, dual spray nozzles with (1) 1-1/2" threaded coupling, 2 hp drive with prop aggitation, start/stop controls, 4-1/2" side bottom discharge with ball valve, mounted on stainless steel legs.

OAD: 72" L x 96" W x 72" H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tanks Tank Processors APV 500 GAL

APV Crepaco, 500 Gallon, low pressure jacketed, 304 stainless steel mixing tank. Equipped with 68" ID x 43" straight wall. Dome top, has 18" ID manway with flip-up / clamp down cover, bridge mounted paddle sweep style agitation with dual spray ball and stationary baffle, 2" and 3" OD sanitarfy top ports and clamp on air vent with screen. Full side and bottom low pressure jacket (2) 1-1/4" ID threaded side and bottom jacket in / outlet ports. Slant bottom with 2" OD threaded side bottom discharge with 6" floor clearance. Mounted on (4) stainless steel legs.

OAD: 80" L x 80" W x 92" H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tanks Tank Processors APV 500 GAL

APV Crepaco, 500 Gallon, low pressure jacketed, 304 stainless steel mixing tank. Equipped with 68" ID x 43" straight wall. Dome top, has 18" ID manway with flip-up / clamp down cover, bridge mounted paddle sweep style agitation with dual spray ball and stationary baffle, 2" and 3" OD sanitarfy top ports and clamp on air vent with screen. Full side and bottom low pressure jacket (2) 1-1/4" ID threaded side and bottom jacket in / outlet ports. Slant bottom with 2" OD threaded side bottom discharge with 6" floor clearance. Mounted on (4) stainless steel legs.

OAD: 80" L x 80" W x 92" H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tanks Tank Processors 300 GAL

APV Crepaco, 300 gallon, 316 S/S. jacketed cooking / mixing vessel. Jacket rated for maximum of 60 psi with (3) 1.5", (2) 1" and (2) 3/4" threaded inlets / oulets. Tank rated for internal pressure of 30 psi and full vacuum. Measures 44" in diameter x 42" deep. Top of vessel has (1) 24" lift up bolt down man way. Equipped with bottom mounted side/bottom scrape agitation, counter rotating agitation and a 3 HP high shear homogenizing mixer mounted on wall between scrappers, 1 1/2" side bottom discharge with 32" floor clearance. Mounted on (4) carbon steel legs.

OAD: 66" (L) x 50" (W) x 84" (H)

Get a Free Quote Call: 630-629-9900