See us at the PMCA Show in Lancaster, PA on 4/15
Home » Arpac » Page 5
Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 28" long in feed conveyor, (2) 20" wide film roll holders with film splicing stations, 21" wide walking beam seal jaws with 11" vertical travel with film roll diameter up to 14" with 3" core and 13" wide x 36" long transfer conveyor to shrink tunnel. 50" long single zone shrink tunnel has 18” wide x 15" high total aperture, 75" long x 20" wide product conveyor and cooling fan discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 150"L x 52"W x 85"H
Arpac, Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel. Rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3½" to 60" in Length; 2" to 16" in Width; ¼" to 7½" in Height. Equipped with 64" long product in feed conveyor, LDPE seal jaws and next generation side seal with product discharge conveyor. Control panel with A/B controller and touch screen HMI. Film specs: Film specifications: up to 39" wide single wound film on 3" OD core; to 14" in diameter, with pull out film carriage. Mounted on (4) leg base frame with interlock safety guarding.Shrink tunnel: Aperture: 21" in Width; 12" in Height; tunnel 72" in Length. Equipped with 80" long x 18" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable (4) leg base frame.
OAD: 255"L x 64"W x 70"H
Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 36" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, film hoist, 21" wide walking beam seal jaws with 11" vertical travel and 13" wide x 26" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 21” wide x 16" high total aperture, 90" long x 20½" wide product conveyor, cooling fan and roller side compression on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 167"L x 60"W x 105"H
Arpac, Model 55TW-28, Inline, continuous. shrink bundler rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Product size range: 6" to 16" in Length; 6" to 18" in Width; 2" to 10" in Height. Side mounted single-wound film roll: 27" in width; and 14" in diameter; with 3" core. Equipped with 26" long x 20" wide in-feed conveyor, 30" wide seal jaws with 10" vertical travel and 40" long x 19" wide transfer conveyor to single zone shrink tunnel with 30” wide x 18" high total aperture and 70" long tunnel with 112" long x 29" wide flex link product conveyor with top mounted blower and has discharge end cooling fan. Control panel has A/B touch pad controls and readout, start / stop / e-stop / manual seal push button controls and digital temperature controller for seal bar and tunnel cooling fan on / off switch and statis light bar.
OAD: 188" L x 64" W x 84" H
Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 36" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, film hoist, 21" wide walking beam seal jaws with 11" vertical travel and 13" wide x 28" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 21” wide x 16" high total aperture, 90" long x 20½" wide product conveyor, cooling fan and roller side compression on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 25" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, film hoist, 21" wide walking beam seal jaws with 11" vertical travel and 13" wide x 38" long transfer conveyor to shrink tunnel. 50" long single zone shrink tunnel has 21” wide x 16" high total aperture, 70" long x 20½" wide product conveyor and cooling fan discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 145"L x 52"W x 105"H
Arpac, Model 55GI-20, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 26" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, 21" wide walking beam seal jaws with 11" vertical travel and 14" wide x 36" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 24” wide x 16" high total aperture, 90" long x 21" wide product conveyor and cooling fan on discharge. Control panel with A/B controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 170"L x 55"W x 78"H
Arpac Model 10828, Automatic, right angle, shrink bundler rated 10 to 20 bundles per minute – depending on materials, application and machine configuration. Equipped with 10" wide x 60" long stainless steel powered roller infeed conveyor, product pusher, 29" wide seal jaw with 12" of vertical travel, top hold down and (2) 5" wide x 16" long transfer conveyors to shrink tunnel. Shrink Tunnel dimensions: 33" wide x 15" high aperture; 100" in Length Chamber. Equipped with 26" wide x 144" long mesh conveyor belt, top mounted center blower, rear cooling fan with (2) side compression rollers. Control panel has A/B PLC with variable temperature and speed controls with statis light. Mounted on heavy duty frame with casters.
OAD: 254" L x 56" W x 80" H
Arpac Models TS2212 / TS60 / 45TW-28, complete, automatic, continous motion, servo driven, tray forming, packing, upstacking and shrink bundling line rated from 5 to 45 trays per minute with number of product per tray – depending on materials and application. Tray Size per application. System consists of Arpac Model 2212 tray former, packer and hot melt glue sealer with 120" long x 18" wide product in feed conveyor with (4) lane dividers to (4) 48" long x 2-1/2" wide product grouping conveyors side mounted 68" wide x 32" high blank tray magazine with (2) suction cup pic n place to tray forming, packing and sealing section with (4)106" long x 1/2" wide lugged compression / discharge conveyor belt section set on 12" centers with Nordson hot melt glue unit with major / minor flap closers. Arpac Model TS60 double upstacker 60" long roller in feed conveyor with 21" wide x 1-1/4" OD rollers set on 1-1/2" centers with 1/8" gaps. collation system has 70" long roller section with 22" wide x 1-3/4" OD rollers set on 2-1/2" centers with 1/2" gaps, 54" long x 16" wide upstack section to 72" long x 17-1/4" wide canvas transfer conveyor to Arpac Model 45TW-28 shrink bundler and tunnel with (1) 36" x 19" wide and (1) 36" wide x 72" long in feed conveyors thru bundler, top and bottom film rolls with maximum film roll width of 27" and 14" OD has 29" wide seal jaws x 13" high total clearence, to single zone shrink tunnel with 36" wide x 19-1/2" high total aperture x 72" long shrink chamber with 29" wide x 108" long product conveyor thru shrink tunnel with top discharge cooling fan. Control panels have A/B controllers with touch pad controls. and readout. All mounted on heavy duty base frames with safety guarding and statis light bars.
OAD: 280" L x 72" W x 70" H Tray Erector/Packer 144" L x 55" W x 72" H Upstacker 72" L x 25" W x 41" H Transfer Conveyor 189" L x 60" W x 80" H Bundler/Tunnel
Arpac, Model TS33CF, continuous motion, horizontal flow thru shrink wrapper and tunnel . *Package size range: 4" to 48" in Length; 8" to 26" in Width; 1/8" to 12" in Height. Equipped with 240" long lugged in feed conveyor currently set on 30" centers with 3½" high lugs, 25½" wide x 53" long former conveyor, 19½" wide x 32" long side seal conveyor, 25" wide x 30" long seal conveyor, 33" pre folded side film unwind, perf wheel, scrap removal, side seal and 28" wide hot knife cross seal with 12" vertical travel. A/B controller with touch screen HMI. Arpac, Model MPD163090, two zone shrink tunnel with 16" high x 30" wide aperture, 90" long two zone tunnel, 28" wide x 106" long conveyor and cooling fan.*Package maximums cannot occur together.Rated from 0 to 80 linear feet per minute with number of product – depending on materials, application and machine configuration.OAD: 466"L x 72"W x 80"H
Arpac Model T54-40-120, high speed, (2) zone shrink tunnel with number of product per minute – depending on materials and application. Tunnel has total aperature of 40" in Height; 54" in Width. Chamber dimensions of 120" in Length. Equipped with 150" long x 45" wide nylon fiberglass flexlink product belt conveyor with 38" in feed and discharge heights. Top mounted dual blowers independently controlled to accommodate high speed shrink wrapping systems. Control panel has heater 1 and 2 controls, power on, cycle start, stop, cycle, reset e-stop buttons. Mounted on heavy duty frame with (4) height adjustable legs.
OAD: 150" L x 100" W x 94" H
Arpac Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 72" long lugged in feed conveyor, LDPE walking beam cross seal jaws and next generation side seal assembly. Features Allen Bradley PLC, interlocked guarding, pull out film carriage, no product detection, perf, scrap removal, jog and E-Stop.Film specifications: up to 39" wide single wound film on 3" OD core; up to 14" in diameter.
Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable legs.
Speed dependent on materials, application, machine configuration and operator dexterity.
OAD: 251" L x 63" W x 61" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.