See us at the PMCA Show in Lancaster, PA on 4/15
Home » Arpac » Page 4
Arpac, Model 25TW-28, inline, intermittent motion, bundler and integrated shrink tunnel rated up to 25 bundles per minute – depending on materials and application. Equipped with 34" long x 24" wide in feed conveyor, 28" wide hot impulse seal jaw with 13" vertical travel, side mounted film racks and splice station, with film rolls up to 27" in width; and 14" OD on 3" core. 38" long x 24" wide transfer conveyor through seal and into single zone shrink tunnel with 29" wide flex link conveyor and 32” in width x 16" in height aperture and 67" long chamber, top mounted blower motor and cooling blower at discharge. Control panel has Allen-Bradley controller with PanelView operator interface and color touch screen, message display and self-diagnostics, low film alert, bypass mode – allows product to pass through the machine without being wrapped and without heating the tunnel. Mounted on heavy duty frame with status light bar and interlocked safety guarding.
OAD: 180"L x 78"W x 80"H
Arpac, model TS-2100, continuous motion wraparound tray former and packer. Rated from 5 to 35 trays per minute – depending on product and machine configuration. Tray size: 9" to 23" in length; 7" to 18" in width; 1½" to 4" wall height. Product size: 2" to 10" in height. Equipped with 20" wide x 204" long product infeed conveyor with adjustable lane guides, top pin grouper, 120" long overhead lugged product carrier set on 36" centers, 32" high adjustable blank tray magazine and Nordson hot melt system. Control panel with AB controller and touch screen HMI.
OAD: 385"L x 90"W x 94"H
Arpac, Model 45TW-28, In line, shrink bundler and tunnel. Product size range: 6" to 15" in Length; 6" to 18" in Width; 2" to 12" in Height. Equipped with 17" wide x 32" long in feed conveyor, film splicing station, 29" wide hot knife cross seal assembly with 12" vertical travel, 17" wide x 30" long transfer conveyor to shrink tunnel with 29” wide x 16" high total aperture and 70" long tunnel with 112" long x 29" wide conveyor and discharge cooling fan. PanelView HMI with A/B PLC and status light bar. Film Roll: up to 27" in width; up to 14" in diameter; 3" core. Speed dependent on materials, application and machine configuration.
OAD: 186"L x 60"W x 92"H
Arpac, Model Pac-4R5, automatic, column style, pallet stretch wrapper with number of pallets per hour – depending on materials, application, machine configuration and environment. Pallet size range: 30" to 48" in Length; 30" to 48" in Width. Load diagonal range: 43" to 68". Load / Wrap height range: 24" to 77". Weight capacity: up to 4,000 lbs. Equipped with 5′ powered in feed roller conveyor, 79" OD turntable and 5 powered out feed roller conveyor with pallet end stop and fork truck capable Control panel has Allen-Bradley MicroLogix 1400 ethernet enabled PLC, Panel View Plus 7 operator interface, fence style safety cage around wrap zone, interlocked access door. Turntable speed: up to 15 rpm. Conveyor speed 35 fpm fixed. Conveyor elevation to top of rollers: 18". Film to 200% pre-stretch. Accepts 20" wide stretch film.
OAD: 200" L x *171" W x 101" H * (dimension includes wrap station guarding)
Arpac Model TS37 / XT18, Horizontal, continuous motion, side seal shrink wrapper and tunnel rated from 0 to 90 linear feet or 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 120" long lugged product in feed conveyor, LDPE seal jaws has next generation side seal with film registration and product discharge conveyor. Film specs: up to 39" wide single winde film on 3" OD core; to 14" OD with pull out film carriage. Control panel has A/B controller, with no product detection, perf and scrap removal wheels, seal bar trim, tempature controllers, drive speed dial with start, stop, jog and e-stop. Mounted on (4) leg frame with interlock safety guarding.
Shrink tunnel: Has an aperture of 24" in Width; 14" in Height and tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, with illuminated shrink chamber with viewing window. top mounted blower with variable speed and temperature controls Mounted on height adjustable (4) leg frame.
OAD: 251" L x 63" W x 61" H
Arpac, Model 25TW-28, inline, intermittent motion, bundler and integrated shrink tunnel. Equipped with 20" long x 24" wide in feed conveyor, 28" wide hot impulse seal jaw with 13" vertical travel, side mounted film racks and splice station, with film rolls up to 27" in width; and 14" OD on 3" core with 18" long x 24" wide transfer conveyor into single zone shrink tunnel with 29" wide flex link conveyor and 32” in width x 16" in height aperture and 67" long chamber, top mounted blower motor and cooling blower at discharge. Control panel has Allen-Bradley controller with PanelView operator interface and color touch screen, message display and self-diagnostics, low film alert, bypass mode – allows product to pass through the machine without being wrapped and without heating the tunnel. Mounted on heavy duty frame with status light bar and interlocked safety guarding.
OAD: 180" L x 72" W x 80" H
Arpac, Model XT18, Convection shrink tunnel with number of product per minute / hour – depending on material and application. Equipped with 12" in Height; 21" in Width total aperture with 73" Long shrink heat chamber, 86" long x 17¼" wide composit conveyor, illuminated shrink chamber and viewing window and blowers. Swivel control panel with variable speed temperature and air velocity controls. Mounted on base frame with casters and leveling legs.
OAD: 88"L x 45"W x 65"H
Arpac Model TS37 / XT18, Horizontal, continuous motion, side seal shrink wrapper and tunnel rated from 0 to 90 linear feet or 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 120" long lugged product in feed conveyor, LDPE seal jaws with next generation side seal with film registration and product discharge conveyor. Film specs: up to 39" wide single wound film on 3" OD core; to 14" OD with pull out film carriage. Control panel has A/B controller, with no product detection, perf and scrap removal wheels, seal bar trim, tempature controllers, drive speed dial with start, stop, jog and e-stop. Mounted on (4) leg frame with interlock safety guarding.
Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable (4) leg frame.
OAD: 300" L x 63" W x 61" H
Arpac, Model 25TW-28 RH, inline, intermittent motion, shrink bundler with integrated tunnel. Equipped with 20" long x 24" wide in feed conveyor, 28" wide hot impulse seal jaw with 13" of vertical travel and an 18" long x 24" wide transfer conveyor into single zone shrink tunnel.
Shrink tunnel features a 29" wide flex link conveyor passing through an aperture of 32” in Width by 16" in Height. Tunnel length of 67". Top mounted "Turbo Cooling" blower at tunnel discharge.
Additionally features Allen-Bradley® PanelView 600Plus operator interface with colortouch screen, message display and self-diagnostics, low film alert, bypass mode – allows product to pass through the machine without being wrapped and without heating the tunnel, side mounted film racks, film splice station, status light bar and interlocked safety guarding.
Speed dependant on materials, application and machine configuration
Film roll: up to 27" in width; up to 14" OD; 3" core.
OAD: 169" L x 72" W x 78" H
Arpac, semi automatic, inline, shrink bundler and tunnel. Rated from 1 to 15 bundles per minute – depending on materials, application and operator dexterity. Product size range: 6" to 18" in Length x 6" to 35" in Width x 6" to 18" in Height. Arpac Model 737C bundler equipped with 37" wide hot knife seal jaws with 20" vertical travel and (2) handed cycle start push buttons and roller transfer conveyor into shrink tunnel, powered film feed and has film specifications of 37" in width up to 14" in diameter on 3" OD core and film type polyethylene or low density polyethylene with film gauge of 1 to 3 mil.
Arpac Model HVP, single zone shrink tunnel with total aperture of 40” in width x 20" in height and has a chamber length of 60" with top mounted blower. Control panel has temperature, variable air flow, variable conveyor speed and e-stops. Capable of running boxes, trays, cartons or any conveyable type product. Mounted on a common frame with leveling legs.
OAD: 141" L x 61" W x 83" H
Arpac, Model 55GI-20, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13½" wide x 34" long in feed conveyor, (2) 20" wide film roll holders with film splicing stations, 21" wide walking beam seal jaws with 11" vertical travel and 14" wide x 30" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 20” wide x 16" high total aperture, 90" long x 20¾" wide Intralox product conveyor, cooling fan and roller side compression on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 164"L x 52"W x 80"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.