Arpac Machines

Arpac Shrink Bundler 55TW-28

• Manufacturer: Arpac
• Model Number: 55TW-28
• Frain Number: 5H1671

Arpac, Model 55TW-28, Inline, continuous. shrink bundler rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Product size range: 6" to 16" in Length; 6" to 18" in Width; 2" to 10" in Height. Side mounted single-wound film roll: 27" in width; and 14" in diameter; with 3" core. Equipped with 26" long x 20" wide in-feed conveyor, 30" wide seal jaws with 10" vertical travel and 40" long x 19" wide transfer conveyor to single zone shrink tunnel with 30” wide x 18" high total aperture and 70" long tunnel with 112" long x 29" wide flex link product conveyor with top mounted blower and has discharge end cooling fan. Control panel has A/B touch pad controls and readout, start / stop / e-stop / manual seal push button controls and digital temperature controller for seal bar and tunnel cooling fan on / off switch and statis light bar.

OAD: 188" L x 64" W x 84" H

Arpac Shrink Bundler 55GI20CX

• Manufacturer: Arpac
• Model Number: 55GI20CX
• Frain Number: 5H1569

Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 36" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, film hoist, 21" wide walking beam seal jaws with 11" vertical travel and 13" wide x 28" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 21” wide x 16" high total aperture, 90" long x 20½" wide product conveyor, cooling fan and roller side compression on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 167"L x 60"W x 105"H

Arpac Shrink Bundler 55GI20CX

• Manufacturer: Arpac
• Model Number: 55GI20CX
• Frain Number: 5H1572

Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 25" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, film hoist, 21" wide walking beam seal jaws with 11" vertical travel and 13" wide x 38" long transfer conveyor to shrink tunnel. 50" long single zone shrink tunnel has 21” wide x 16" high total aperture, 70" long x 20½" wide product conveyor and cooling fan discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 145"L x 52"W x 105"H

Arpac Shrink Bundler 55GI20

• Manufacturer: Arpac
• Model Number: 55GI20
• Frain Number: 5H4090

Arpac, Model 55GI-20, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 26" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, 21" wide walking beam seal jaws with 11" vertical travel and 14" wide x 36" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 24” wide x 16" high total aperture, 90" long x 21" wide product conveyor and cooling fan on discharge. Control panel with A/B controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 170"L x 55"W x 78"H

Arpac Shrink Bundler 10828

• Manufacturer: Arpac
• Model Number: 10828
• Frain Number: 5F2031

Arpac Model 10828, Automatic, right angle, shrink bundler rated 10 to 20 bundles per minute – depending on materials, application and machine configuration. Equipped with 10" wide x 60" long stainless steel powered roller infeed conveyor, product pusher, 29" wide seal jaw with 12" of vertical travel, top hold down and (2) 5" wide x 16" long transfer conveyors to shrink tunnel.
Shrink Tunnel dimensions: 33" wide x 15" high aperture; 100" in Length Chamber. Equipped with 26" wide x 144" long mesh conveyor belt, top mounted center blower, rear cooling fan with (2) side compression rollers. Control panel has A/B PLC with variable temperature and speed controls with statis light. Mounted on heavy duty frame with casters.

OAD: 254" L x 56" W x 80" H

Arpac Case Packer Tray Form/Pack TS2212/45TW28

• Manufacturer: Arpac
• Model Number: TS2212/45TW28
• Frain Number: 5H5201

Arpac Models TS2212 / TS60 / 45TW-28, complete, automatic, continous motion, servo driven, tray forming, packing, upstacking and shrink bundling line rated from 5 to 45 trays per minute with number of product per tray – depending on materials and application. Tray Size per application. System consists of Arpac Model 2212 tray former, packer and hot melt glue sealer with 120" long x 18" wide product in feed conveyor with (4) lane dividers to (4) 48" long x 2-1/2" wide product grouping conveyors side mounted 68" wide x 32" high blank tray magazine with (2) suction cup pic n place to tray forming, packing and sealing section with (4)106" long x 1/2" wide lugged compression / discharge conveyor belt section set on 12" centers with Nordson hot melt glue unit with major / minor flap closers. Arpac Model TS60 double upstacker 60" long roller in feed conveyor with 21" wide x 1-1/4" OD rollers set on 1-1/2" centers with 1/8" gaps. collation system has 70" long roller section with 22" wide x 1-3/4" OD rollers set on 2-1/2" centers with 1/2" gaps, 54" long x 16" wide upstack section to
72" long x 17-1/4" wide canvas transfer conveyor to Arpac Model 45TW-28 shrink bundler and tunnel with (1) 36" x 19" wide and (1) 36" wide x 72" long in feed conveyors thru bundler, top and bottom film rolls with maximum film roll width of 27" and 14" OD has 29" wide seal jaws x 13" high total clearence, to single zone shrink tunnel with 36" wide x 19-1/2" high total aperture x 72" long shrink chamber with 29" wide x 108" long product conveyor thru shrink tunnel with top discharge cooling fan. Control panels have A/B controllers with touch pad controls. and readout. All mounted on heavy duty base frames with safety guarding and statis light bars.

OAD: 280" L x 72" W x 70" H Tray Erector/Packer
144" L x 55" W x 72" H Upstacker
72" L x 25" W x 41" H Transfer Conveyor
189" L x 60" W x 80" H Bundler/Tunnel

Arpac Shrink Flow Thru TS33CF / MPD163090

• Manufacturer: Arpac
• Model Number: TS33CF / MPD163090
• Frain Number: 5H5010

Arpac, Model TS33CF, continuous motion, horizontal flow thru shrink wrapper and tunnel . *Package size range: 4" to 60" in Length; 8" to 26" in Width; 1/8" to 12" in Height. Equipped with 240" long lugged in feed conveyor currently set on 30" centers with 3½" high lugs, 25½" wide x 53" long former conveyor, 19½" wide x 32" long side seal conveyor, 25" wide x 30" long seal conveyor, 33" pre folded side film unwind, perf wheel, scrap removal, side seal and 28" wide hot knife cross seal with 12" vertical travel. A/B controller with touch screen HMI. Arpac, Model MPD163090, two zone shrink tunnel with 16" high x 30" wide aperture, 90" long two zone tunnel, 28" wide x 106" long conveyor and cooling fan.
*Package maximums cannot occur together.
Rated from 0 to 80 linear feet per minute with number of product – depending on materials, application and machine configuration.
OAD: 466"L x 72"W x 80"H

Arpac Shrink Tunnels T54-40-120

• Manufacturer: Arpac
• Model Number: T54-40-120
• Frain Number: 5H5020

Arpac Model T54-40-120, high speed, (2) zone shrink tunnel with number of product per minute – depending on materials and application. Tunnel has total aperature of 40" in Height; 54" in Width. Chamber dimensions of 120" in Length. Equipped with 150" long x 45" wide nylon fiberglass flexlink product belt conveyor with 38" in feed and discharge heights. Top mounted dual blowers independently controlled to accommodate high speed shrink wrapping systems. Control panel has heater 1 and 2 controls, power on, cycle start, stop, cycle, reset e-stop buttons. Mounted on heavy duty frame with (4) height adjustable legs.

OAD: 150" L x 100" W x 94" H

Arpac Shrink Flow Thru TS37

• Manufacturer: Arpac
• Model Number: TS37
• Frain Number: R30180

Arpac Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 72" long lugged in feed conveyor, LDPE walking beam cross seal jaws and next generation side seal assembly. Features Allen Bradley PLC, interlocked guarding, pull out film carriage, no product detection, perf, scrap removal, jog and E-Stop.
Film specifications: up to 39" wide single wound film on 3" OD core; up to 14" in diameter.

Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable legs.

Speed dependent on materials, application, machine configuration and operator dexterity.

OAD: 251" L x 63" W x 61" H

Arpac Shrink Flow Thru HC37

• Manufacturer: Arpac
• Model Number: HC37
• Frain Number: R30400

Arpac Model HC37, horizontal, continuous motion, servo driven, flow thru shrink wrapper and bottom lap sealer rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to per application in Length; up to 16" in Width; up to 7-1/2" horizontal jaws and up to 12" vertical jaws in Height. Equipped with 245" long Lugged servo driven in feed conveyor with 1/2" wide x 1" high lugs set on 16" centers with adjustable guide rails into the flow wrapper forming plow, with 19" long 9-1/2" wide vacuum conveyor pulling film and product to 32" long x 9-1/2" wide neophreme belt conveyor thru the 17" wide interchangeable horizontal or vertical cross seal jaws and overlapping bottom film static lap seal to the discharge. Centerfold film maximum width up to 37" and film roll maximum OD up to 14" and has 38" long servo driven film rolls with perf wheels. Control panel has A/B CPU and A/B panelview controller with seal bar and lap seal temperature controllers, manual / jog, cycle start and on / off with e-start, Mounted on (4) leg base frame with interlock safety door guarding.

OAD: 84" L x 64" W x 78" H Flow Thru Sealer
245" L x 36" W x 36" H In Feed Conveyor

Arpac Shrink Bundler 105-24

• Manufacturer: Arpac
• Model Number: 105-24
• Frain Number: 5H4471

Arpac, Model 105-24 Inline, intermittent motion, shrink bundler and tunnel. Rated from 5 to 20 bundles per minute – depending on materials and application. Equipped with 22" wide x 70" long in feed conveyor, 24" wide film rolls, 25" wide seal jaws with 13" vertical travel, 22" wide x 22" long Intralox transfer conveyor to shrink tunnel. Single zone shrink tunnel has 24” wide x 15" high total aperture x 60" long with 90" long x 24" wide Intralox product conveyor. Control panel has touch pad controls and readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 190"L x 63"W x 84"H

Arpac Shrink Bundler 105TW28

• Manufacturer: Arpac
• Model Number: 105TW28
• Frain Number: R29143

Arpac, Model 105TW28, Inline, shrink bundler. Equipped with 20" wide x 70" long slip torque in feed conveyor, 28" wide hot knife cross seal with 12" vertical travel and 25¼" wide x 12" long transfer conveyor to shrink tunnel. 70" long shrink tunnel has 29” wide x 17" high total aperture, 110" long x 29" wide product conveyor and cooling fan on discharge. AB PLC and touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty frame. Speed dependent on materials, application and machine configuration

OAD: 202"L x 72"W x 90"H