Lee Machines

Lee Kettle Triple Motion 300D12T

• Manufacturer: Lee
• Model Number: 300D12T
• Frain Number: R30290

Lee, Model 300D12T, 300 gallon 316 stainless steel triple motion, jacketed kettle. Vessel Dimensions: 54" inside Diameter; 47" in Depth. Equipped with tilt out, bridge mounted variable speed agitation. (Double motion scrape / counter rotation agitator powered by a 20 Hp drive, high shear agitator powered by a 75 hp direct drive.), CIP spray ball supplied by a 2"OD / 1"ID tri-clamp fitting, (1) 2½" OD / 2"ID tri-clamp style discharge with ball valve and 15" ground clearance and (1) 2" OD / 1½"ID tri-clamp style discharge with ball valve and 18" ground clearance.

Top Access:
(2) 3¾"OD / 3"ID Tri-Clamp
(5) 2½"OD / 2"ID Tri-Clamp

Side Access:
(1) 2½"OD / 2"ID Tri-Clamp

Jacket Fittings:
(4) 1" NPT

National Board number: 8830
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15 PSI @ 250°F (vessel)
MDMT: -20°F @ 15 PSI (vessel)

*vessel rated for internal vacuum service*

OAD: 110"L x 64"W x 157"H

Lee Kettle Double Motion 200D9MSI

• Manufacturer: Lee
• Model Number: 200D9MSI
• Frain Number: R29911

Lee, Model 200D9MSI, 316 stainless steel 1/2 jacketed kettle. with amount of product per hour – depending on materials and application. Vessel Dimensions: 48" ID x 39" Deep mixing bowl. Equipped with bridge mounted scrape surface agitator and flip top covers. Dish bottom with 4½" OD / 4" ID tri-clamp style center bottom discharge with 21" floor clearence. Mounted on (4) stainless steel tubular leg frame.

Jacket Fittings:
(2) 2" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat’l Brd: 7992

OAD: 68" L x 52" W x 97 H

Lee Mixer Paste Horizontal 25UTPR

• Manufacturer: Lee
• Model Number: 25UTPR
• Frain Number: R30128

Lee 25UTPR, 25 Gallon, 3.3 ft³, 316 stainless steel, jacketed, horizontal paddle mixer. Vessel dimensions: 23" in Length; 20" in Width; 24" in Depth. M.A.W.P: 100 psi @ 338° F; M.D.M.T: -20° @ 100 psi. Equipped with a clamp down cover, 2.5" OD Tri-Clover top inlet, 10" x 10" flip open port, six 5" wide x 3" high paddles on a 2" diameter shaft, 2.5" OD side bottom discharge and variable speed.

OAD: 80" L x 28" W x 56" H

Lee Tank SS Single Wall 300DBT

• Manufacturer: Lee
• Model Number: 300DBT
• Frain Number: R30126

Lee, Model 300DBT, 300 gallon capacity, 316 stainless steel single wall tank. Vessel dimensions: 44" diameter x 55" deep with dish style bottom. Equipped with flip up covers and 10 Hp bottom side mounted Dixie mixer agitator. Unit mounted on (4) legs with a 3½" OD / 3" ID tri-clamp style bottom discharge with 16" ground clearance.

Top Ports: (7) 2½" OD / 2" ID Tri-clamp

Side Ports: (2) 2½" OD / 2" ID Tri-clamp

OAD: 100"L x 47"W x 83"H

Lee Kettle Double Motion 5CD9MT

• Manufacturer: Lee
• Model Number: 5CD9MT
• Frain Number: R30110

Lee, Model 5CD9MT, 5 gallon, 316 stainless steel jacketed double motion kettle. Vessel Dimensions: 16" diameter x 10" deep with a 3" straight wall. Equipped with tilt out (scrape & counter rotation) agitation, ½ hp variable speed drive and manual tilt discharge with 21" ground clearance. Mounted on a 40" x 40" painted base with casters.

MAWP: 40 psi @ 300°F
Nat’l Brd: 2693

Jacket Ports:
(2) ¾" NPT

OAD: 50"L x 45"W x 50"H

Lee Kettle Double Motion 50D9MT

• Manufacturer: Lee
• Model Number: 50D9MT
• Frain Number: R29180

Lee, 50 gallon, 304 stainless steel jacketed kettle. Vessel Dimensions: 32" diameter x 22" deep with a 10" straight wall. Equipped with a bridge mounted scrape agitator powered by a single 2 Hp drive, flush mount sensor, bottom feed port with backflow valve and 2½" OD / 2"ID tri-clamp style discharge with butterfly valve and 7" ground clearance. Mounted on (3) tubular leg frame.

Jacket Fittings:
(2) ¾" NPT

MAWP: 40 PSI @ 287° F
MDMT: -20°F @ 40 PSI

OAD: 57"L x 35"W x 54"H

Lee Kettle Double Motion 80EDA

• Manufacturer: Lee
• Model Number: 80EDA
• Frain Number: R29650

18000W WatcLee, Model 80EDA, platform mounted 80 gallon stainless steel batch mixing system. Kettle Dimensions: 36" diameter x 24" deep. Equipped with bridge mounted double motion scrape surface agitation and mounted on Weigh Tronix load cells. Kettle discharges to a Waukesha, Model 45, positive displacement pump with a jacketed head and 3¼"OD / 1¾"ID I-Line style fitting with 16" ground clearance. Heat transfer surfaces supplied by a self contained 18000w Watlow heating system with hot water tank and Waukesha, Model C, centrifugal pump. Control panel with AB PanelView 550 HMI and AB PLC. System mounted on heavy duty stainless steel push cart.

MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI

OAD: 105"L x 68"W x 90"W

Lee Kettle Double Motion 300D9MT

• Manufacturer: Lee
• Model Number: 300D9MT
• Frain Number: R28090

Lee, Model 300D9MT, 316 stainless steel jacketed kettle. Vessel Dimensions: 54" diameter x 42" deep with an 18" straight wall. Equipped with a flush mount sensor, tilt out bridge mounted scrape agitator powered by a 3 Hp drive with VFD and 2½" OD / 2"ID tri-clamp style discharge with ball valve at 15" ground clearance. Mounted on (3) tubular leg frame.

Jacket Fittings: (2) 1½" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
National Board: 13872

OAD: 78"L x 58"W x 80"H

Lee Kettle Double Motion 150D9MT

• Manufacturer: Lee
• Model Number: 150D9MT
• Frain Number: R28091

Lee, Model 150D9MT, 316 stainless steel jacketed kettle. Vessel Dimensions: 42" diameter x 34" deep with a 15" straight wall. Equipped with a flush mount sensor, tilt out bridge mounted scrape agitator powered by a single 2 Hp drive with variable speed control and 2½" OD / 2"ID tri-clamp style discharge with ball valve and 15" ground clearance. Mounted on (3) tubular leg frame.

Jacket Fittings: (2) 1½" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat’l Brd: 13878

OAD: 68"L x 48"W x 68"H

Lee Kettle Double Motion 100 NEM

• Manufacturer: Lee
• Model Number: 100 NEM
• Frain Number: R29290

Lee, Model 100 NEM, 100 gallon capacity, 316 stainless steel, double motion (scrape & prop) kettle. Vessel dimensions: 36" diameter x 30" deep with a 14" straight wall. Equipped with lift off covers with safety shut-off, bridge mounted 3 HP scrape and 1 HP prop agitator, flush mounted sensor and 2½" OD / 2" ID Tri-Clamp style bottom discharge with ball valve and 15" ground clearance.

Jacket Ports:
(4) 1" NPT

Nat’l Brd: 11162
MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI

OAD: 48"L x 50"W x 91"H (Kettle)

Lee Kettle Double Motion 500D9MT

• Manufacturer: Lee
• Model Number: 500D9MT
• Frain Number: R28840

Lee Model 500D9MT, 500 gallon, 316 stainless steel interior, 304 stainless steel external, double motion, scrape surface, jacketed kettle. Vessel dimensions: 62" ID x 51" in Depth. Equipped with variable speed bridge mounted scrape surface and counter rotation tilt out agitation, dual flip top covers, 1/2 Jacket, with MAWP of 90 psi @ 322 Deg F and MDMT of -20 Deg F @ 90 psi with (2) 1-3/4" OD 1-1/2" ID side and bottom threaded jacket in / outlet ports. Dish bottom with 3-1/2" OD / 3" ID sanitary center bottom discharge has flush-bottom ball valve with 19" floor clearance. Mounted on (3) stainless steel legs. Pounds / gallons of product per hour dependant on materials and application.

OAD: 108" L x 75" W x 90" H

Lee Kettle Triple Motion 75DT12T

• Manufacturer: Lee
• Model Number: 75DT12T
• Frain Number: R26112

Lee Model 75DT12T, 75 Gallon, 316 stainless steel, full jacket,Tri-mixer with volumes of product per hour – depending on materials and application. Bowl dimensions: 32" ID; 38" in Depth. Equipped with flat top, bridge mounted hydraulic tilt out, counter rotating agitation with side / bottom scrape has center mounted high shear mixer and dual flip up covers with safety grids and micro safety switches. Full jacket rated at MAWP of 90 psi @ 332 Deg F and MDMT of -20 Deg F @ 90 psi threaded side and bottom jacket in / outlets and flush mount pressure gage. Dish bottom has 2" OD center bottom sanitary discharge with 4" floor clearance, Control panel has double motion, high shear, tank light, power on / off and e-stop controls with speed dials and chart recorder. National Board # 5395

OAD: 64" L x 48" W x 97" H Mixer
36" L x 16" W x 60" H Control Panel