Adco, Model 9WA-100-SS, Automatic, continous motion, stainless steel, wrap around, hot melt glue cartoner. Rated from 50 to 100 cartons per minute – depending on materials, application and machine configuration. Equipped with a 5¼" wide infeed conveyor, 48" long powered blank carton magazine, (2) head rotary blank carton pick n place, 36" long dual worm screw indexing, lugged chain product conveyor set on 9" centers, overhead confinement conveyor and Nordson hot melt glue system. Control panel has A/B PLC controller with touch screen HMI and statis light bar.
OAD: 262"L x 75"W x 95"H
Cryogenics Systems, Model CES-LT-LIN-20FTx2FT-PODB, liquid nitrogen freeze tunnel. Equipped with a 25" wide x 282" long belt with a 33" infeed / discharge height, 240" long freeze chamber with a 29" wide x 8½" high aperture, (5) fans powered by 1 HP drives and drop down guarding. Control cabinet has AB PLC and touch screen HMI.
OAD: 300"L x 70"W x 88"H
Urschel Model RAA stainless steel dicer / strip cutter able to process a variety of fruits, vegetable and processed meats. Maximum product input 3.5" in any direction. Rates dependent on materials, application and machine configuration. Change parts required to accommodate size range.
Slice knife thickness: 1/16 to 3/8"
Slitter cuts: 1/8 to 1"
Crosscut cuts: .05 to 3"
Tronics Model S30, stainless steel, open frame, stepper driven, pressure sensitive, wrap labeler rated from 100" to 1,200" of labels per minute – depending on materials and application. Label size range up to: 10" in Height x 29" in length with accuracies up to + / – 1/32nd of label placement and containers from 5ml vials to 10 gallon containers both with proper change parts. Equipped with 4" wide x 120" long plastic Delrin product conveyor with 32" in feed / discharge height, spacing wheel indexing, adjustable guide rails, no container / no label, single label head with 9-1/2" high peeler plate and 6" high side" 21" long x wrap belt, 13" OD label reel on 1-1/2" OD core and is hand crank adjustable. Control panel has touch pad controls with read out and has up to 100 job memory with e-stop. Mounted on stainless steel frame with casters and leveling legs.
OAD: 120" L x 54" W x 56" H
Repak / Reiser, model RE20, inline, compact, roll-stock, form, fill and seal thermoformer. Rated up to 12 cycles per minute with number of product – depending on materials, application and machine configuration. 440 mm stroke length and a maximum depth of 120mm. Equipped with 460mm web width film, thermoform station, 175" long product load area, top seal section with gas flush, cross cut off knives, rotary sliters, scrap rewind and 15¾" wide discharge conveyor. Control panel has Omron controller with swing arm touch screen HMI. System includes a 25 hp vacuum pump and 1 ton chiller.
OAD: 353"L x 43"W x 77"H
Aluminum mezzanine equipped with a 72" x 36" standing platform with 42" high guard rail set 27" off the ground, (2) step staircase each side and 21" crossover clearance.
OAD: 109"L x 38"W x 70"H
PDC, Model KRC184654, stainless steel, over the conveyor, neck band or sleeve labeler, hot air shrink tunnel with number of product per minute – depending on materials and application. Equipped with 4-1/4″ Wide x 5″ High x 46″ long heat shrink chamber capable of handling 4″ diameter necks and 4″ high bands. Control panel has A/B controller and single top mounted blower motor and temperature controller with e-stop. Mounted on KAL-200 auto-lift height adjustable stand and has 74″ long x 38″ wide x 74″ high enclosed plastic safety guarding.
OAD: 44″ L x 30″ W x 62″ H Shrink Tunnel
74″ L x 38″ W x 74″ H Overall
PDC Model 75E, automatic, stainless steel, continuous motion, shrink neck bander and sleever. Rated from 30 to 300 containers per minute – depending on materials and application. Neck band size range: 3.5″ OD x 6″ high. Full shrink sleeve size range: 3.5″ OD x 9″ high. Equipped with 144″ long x 3-14″ wide delron product conveyor with 36″ in feed / discharge height and container senser. 24″ long worm screw container indexing, powered stepper motor film feed with bottom film unwind disc, feed rollers, film tensioner, film registration, low material, film out sensor, splice table with splice detector sensor to stop machine, film forming wedge, blade assembly and hand crank jog with PDC Model BDE-102 air reject with catch basket. Control panel has A/B CPU controller and touchscreen operator interface with machine raise / lower switch, machine power on, start, reset and e-stop push button controls. A/B powerflex vari speed controls, Hirshmann ethernet switch RS2-TX/TX and control tower stack light. Mounted on stainless steel frame with 47″ long x 37″ wide x 54″ high enclosed interlocking plastic safety guarding.
OAD: 32″ L x 24″ W x 75″ H Applicator
47″ L x 37″ W x 54″ H Guarding
144″ L x 60″ W x 80″ H Total Overall
Ishida DACSG1523SSIS, Automatic, (3) zone, stainless steel checkweigher rated up to 300 feet per minute with number of product – depending on materials and application. Load cell: 14" in Length; 9.5" in Width. Weight range: from 15 to 1,500 grams. Accuracy to: +/- 1 grams depending on application with minimum graduation of 0.1 gram. Equipped with 14" long x 9.5" wide neoprene infeed conveyor belt, with stainless steel guide rails, 14" long by 9.5" wide neoprene weighing conveyor with load cell, sweep arm reject for over and under product, 18" long by 9.5" wide neoprene discharge conveyor. Touch pad operator interface with visual display. Mounted on a stainless steel frame with height adjustable legs.
OAD: 49" L x 32" W x 57" H
Ishida DACSG1523SSIS, Automatic, (3) zone, stainless steel checkweigher rated up to 300 feet per minute with number of product – depending on materials and application. Load cell: 14" in Length; 9.5" in Width. Weight range: from 15 to 1,500 grams. Accuracy to: +/- 1 grams depending on application with minimum graduation of 0.1 gram. Equipped with 14" long x 9.5" wide neoprene infeed conveyor belt, with stainless steel guide rails, 14" long by 9.5" wide neoprene weighing conveyor with load cell, sweep arm reject for over and under product, 18" long by 9.5" wide neoprene discharge conveyor. Touch pad operator interface with visual display. Mounted on a stainless steel frame with height adjustable legs.
OAD: 49" L x 32" W x 57" H
Adco, Model 15DBC105SS, Semi-automatic, continuous motion, horizontal, hot melt glue cartoner rated from 25 to 120 cartons per minute – depending on materials, application and operator dexterity. Carton size range: 1" to 9-1/2" in Length; 3/4" to 4" in Width 4 to 12" in Depth. Equipped with (4) chains adjustable set on 12" centers and has 3½" high lugs, with automatic 46" long belt blank carton magazine, (2) head rotary pic-n-place, with pre-break, no-product / no-carton, top carton hold down, barrel cam loader, Nordson hot melt glue unit and built in vacuum system. Control Panel has relay logic controller with machine, vacuum, speed, pattern control with jog / run, on / off switches and start, stop, e-stop push button controls and statis light. Mounted on heavy duty height adjustable frame with casters, leveling legs and interlock safety guarding.
OAD: 288" L x 63" W x 75 " H
Pfm, Model Falcon, 2-up, automatic, servo driven, horizontal flow wrapper. Product size range: 1.6" to 18" in Length; 3/8" to 9" in Width; up to 3.5" in Height standard. Equipped with 12" wide x 78" long slip torque infeed conveyor, 11¾" wide x 60" long three section smart belt, 36" long lugged infeed with 1½" high quick change lugs set on 4" centers, no product / no pouch, adjustable forming box, 2-up, 9.8" wide x 1" thick seal jaws, (3) sets of fin seal wheels, interlock safety guarding and 36" long powered discharge conveyor. Film specifications up to 23.6" reel width; up to 13.7" reel OD; on 3" OD core. Has (2) film rolls (1) for extra film roll no splice station. Control panel has PLC controls with touch screen HMI. Mounted on base frame with leveling legs. Speed dependent on materials, application, machine configuration and operator dexterity.
OAD: 265"L x 60"W x 89"H
