Cutter Slicer Machines

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor 2100

• Manufacturer: Urschel
• Model Number: 2100
• Frain Number: 5J1451

Urschel, Model 2100, Stainless steel Comitrol, with feeder and processor unit. Equipped with 30" long x 22" wide x 28" deep product hopper and 8" straight wall. 27" long x 14" diameter beater bar with (10) 5" long x 3" wide paddles powered by a 2 Hp drive, 6" diameter auger feeder with 6" centers powered by a 3 Hp drive, stationary cutting head and rotating impeller powered by 40 Hp drive. Mounted on a stainless steel frame with 35" ground clearance for product discharge.

OAD: 84"L x 80"W x 82"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor M6

• Manufacturer: Urschel
• Model Number: M6
• Frain Number: R38290

Urschel, Model M6, Stainless steel, belt fed, dicer, shredder and strip cutter designed for meat products and is capable of production rates from 500 to 4,500 lbs. per hour – depending on materials, application and machine configuration. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 35" x 9" load area with feed belt and adjustable feed roll allowing for positive product feed of all thicknesses from 3/8" to 1". Mounted on base frame with casters. Change parts required to accommodate size range change.

OAD: 118" L x 50" W x 76" H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor RAD

• Manufacturer: Urschel
• Model Number: RAD
• Frain Number: 5J1380

Urschel, Model RA-D, Stainless steel, dicer and strip-cutter with production rates depending on materials and application. Capable of handling product up to 3½" in any dimension. Slice thickness range from 1/16" to 3/8", circular knives range from 1/8" to 1" and crosscut knives range from 1/8" to 1½" spacing (with proper change parts). Equipped with top-mounted stainless steel product feed hopper. Control panel has start, stop and safety controls. Mounted on stainless steel frame with locking casters. Change parts required to accommodate different size ranges with excellent results on a variety of cheese and meat products.

OAD: 46" L x 40" W x 62" H

Urschel Laboratories Inc Cutter, Slicer SPRINT

• Manufacturer: Urschel
• Model Number: SPRINT
• Frain Number: R37240

Urschel, Model SPRINT, Stainless steel cutter, uniformly dices, strip cuts and slices a wide variety of products at high production rated with pounds of product per hour – depending on materials and application. Accepts products up to 6½" in any dimension. Equipped with 16" long x 12" wide x 20" deep product feed hopper, (4) paddle impeller, slicing and slitting knife stations with cross cut station. 20" long x 9" wide product discharge with 32" floor clearence. Control panel has start, stop e-stop controls. Mounted on (4) stainless steel legs with casters.

Types of cuts and slices:

Flat slices:1/16 to 1"
Crinkle Slices: 1/8" to 1"
Deep Crinkle Slices: 1/8" to 1/2"

Strip cuts:
Flat Strip Minimum / Maximum 1/8 x 1/8" to 1 x 1" x length of product.
Crinkle strips 9/32 x 9/32" length of product
Circular knife cuts: 1/8 to 3"
Crosscut knife cuts: 1/8 to 1-1/2"
Crosscut knife crinkle cuts: 9/32 to 5/8"
Crosscut Knife Deep Crinkle Cuts: 3/8 to 1/2"
Crosscut Knife V-Cuts: 5/16 to 1/2"

Shreds: A shredding spindle can be installed in place of the crosscut knife spindle. Shreds will vary depending on number of spacers and shred discs
used.

Change parts required to accommodate size range.

OAD: 55" L x 42" W x 68" H

Urschel Laboratories Inc Cutter, Slicer Slicer SPRINT

• Manufacturer: Urschel
• Model Number: SPRINT
• Frain Number: R38080

Urschel Model Sprint 2, Stainless steel dicer, that uniformly dices, strip cuts and slices a wide variety of products at high production capacities with product per minute and hour – depending on materials, application and machine configuration. Capable of handling product sizes up to 6½" in any dimension. Circular knife cuts: 1/8 to 3" (3.2 to 76.2 mm), Crosscut knife cuts: 3/32 to 1" (2.4 to 25.4 mm), Crosscut knife crinkle cuts: 9/32 to 9/16" (7.1 to 14.3 mm). Equipped with 18" x 17" rectangular x 26" deep product hopper, 14" diameter x 7" wide product chamber, circular and cross cut knives, 1½ Hp drive and has 10" wide x 24" long discharge conveyor with 33" ground clearance. Mounted on (4) leg frame with casters.
Change parts required per application.

OAD: 72" L x 62" W x 62" H

Hydrauflake / Gemac Cutter, Slicer Chopper/Processor 2501

• Manufacturer: Hydrauflake / Gemac
• Model Number: 2501
• Frain Number: R35060

Genmac Model 2501Hydrauflaker, Stainless steel, frozen block breaker. Block sizes up to 24" in Length: 24" in Width; 10" in Height. Equipped with 30" wide x 69" long product feed table, 22" wide x 6-1/2" high hydraulic ram and eight blade rotary drum assembly. Additionally features safety cover with interlock. Discharge chute with 28" floor clearance. Rated dependent on materials, application machine configuration and operator dexterity.

OAD: 92" L x 52" W x 55" H

Grote Cutter, Slicer Slicer HB2

• Manufacturer: Grote
• Model Number: HB2
• Frain Number: R30672

Grote Model HB2, stainless steel, product bisector, cuts bread products horizontally into halves up to 200 pieces per minute – depending on materials and application. Product cutting zone is 4.94" in Width x .5 to 3.25" in Height and capable of cutting in temperatures as low as 20°F (-6°C) depending on product and has an enclosure rating of IP65. Equipped with single 12" wide x 84" long product in feed, thru the AccuBand ® disposable band cutting blade and discharge conveyor, with top product pressure hold down belt and hand crank adjustable for a variety of different cut heights of bread products, with flip-up interlock safety guard covers. Control panel has machine on / off and able, conveyor speed and guarding release latch controls with e-stops. Mounted on stainelss steel frame with casters and leving legs.

OAD: 94" L x 48" W x 60" H

JWC Cutter, Slicer Chopper/Processor 4-SHRED-1-H-2400

• Manufacturer: JWC
• Model Number: 4-SHRED-1-H-2400
• Frain Number: 5J0851

JWC, Model 4-SHRED-1-H-2100, shredder. Equipped with 36" long x 36" wide x 24" Deep product feed hopper 48" long strong shafts and severe-duty seals that allows for high-impact solids loading 25 Hp motor drive shredding items down to size and have been proven in many applications including shredding for recycling, preconditioning of organics for waste-to-energy operations and the destruction of off-specification and contraband products. Mounted on multi-leg frame.

OAD: 92"L x 40"W x 73"H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor G

• Manufacturer: Urschel
• Model Number: G
• Frain Number: 5J0540

Urschel Model G, Stainless steel, compact dicer rated up to 22,000 lbs per hour – depending on materials and application. Accepts up to 5-1/2" OD product and utilizes slice, crosscut, and circular knifes. Cut thickness: slicing blade 1/8" to 5/8" crosscut knives 9/32" to 3", and circular knives 1/8" to 3", with 15½" Long x 19" Wide x 10½" Deep product hopper, with 2 Hp. Mounted on stainless steel frame.
Change parts required to accommodate different size ranges.

OAD: 46" L x 58" W x 45" H

Urschel Laboratories Inc Cutter, Slicer Slicer GA

• Manufacturer: Urschel
• Model Number: GA
• Frain Number: 5J0330

Urschel Model G, Stainless steel USDA, dicer, slicer and cutter used for a variety of food products with volumes per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with size ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" and up to 3" Circular. Continuous motion for uninterupted production and accept products up to 5-1/2" in any dimension. Product is fed thru hopper into a rotating impellor to the blades. Equipped with stainless steel feed hopper, discharge chute and lift off safety guarding start and stop push buttons controls. Mounted on stainless steel frame with casters.
Change parts required for different size changes.

OAD: 60"L x 45"W x 48"H

Grote Cutter, Slicer Slicer FPS-1000

• Manufacturer: Grote
• Model Number: FPS-1000
• Frain Number: 5J0272

Grote, Model FPS-1000, (6) cavity bulk product slicer, rated up to 120 strokes per minute with volume of product – depending on materials, application and machine configuration. Product size up to 5" in Diameter. Slice thickness down to 0.125". Equipped with 54" long x 30" wide conveyor, (6) 24" long x 3¼" ID pivot style product holders, 30" wide slicing zone with Accuband cutting band blade and hydraulic drive. Control panel has start / stop, hydraulic pump control, slicer on / off, conveyor speed and e-stop. Stainless steel, sanitary design. A/B MicroLogix PLC and safety guarding. Mounted on stainless steel frame with casters, leveling legs and safety guarding. Change parts required to accommodate size range.
Cantilevered design integrates seamlessly to your further processing systems such as dehydrating or cooking,

OAD: 72" L x 60" W x 72" H

Urschel Laboratories Inc Cutter, Slicer Chopper/Processor VSC

• Manufacturer: Urschel
• Model Number: VSC
• Frain Number: 5J0090

Urschel, Model VSC, Automatic slicer for uniform segments, slabs and strip cuts, with pounds of product per hour – depending on materials, application, configuration and type of cut. Accepts product up to 4" in diameter. Equipped with 5" wide top and bottom product conveyor belts, 5" diameter product cutting and discharge cone. Capable of doing Segment cut types: 3, 4, 5, 6, 7, 8, 10 or 12. Rectangular strips: 7.1mm x 10.3mm to 8.7mm x 11.9mm. Square strips: 4.0mm x 7.5mm to 14.2mm x 25mm and capable of flat slab, bi-slab, cross slabs cuts and coring with segment. Control panel has power on, start, stop, reset and e-stop push buttons with speed dial. Mounted on stainless steel frame with interlock safety doors.
Change parts required per different applications and configurations.

OAD: 90" L x 32" W x 57" H