See us at PACK EXPO International in Chicago, IL Nov. 3-6. Register for FREE with code 78Q56
Home » Fillers - Cup Filling
Frain Industries is the industry authority in providing used cup filling equipment solutions. Frain carries several types of cup fillers covering a wide range of products including liquids, gels, pastes, and powders. Additionally there are many types of filling heads depending on the product type. Volumetric cup, auger, net weight, volumetric piston filling machines, pump, and peristaltic are just some of the configurations available.
Frain Industries offers cup filling machines in semi-automatic and automatic configuration as well as inline and rotary. The Frain engineering team can design a cup filling solution based on your product, application, line speed, and line integration requirements.
Frain Industries carries used cup filling machines from many OEM’s including Autoprod, Oystar, Holmatic, Modern, Osgood, Akra Pak, All Fill, Spee Dee, Nova, Trepko, World Cup, Gold Cup, and many others.
Autoprod Model ZP1X4, Stainless steel, wipe-down 1 x 4 inline cup filler heat sealer rated from 20 to 120 cups per minute – depending on material and application. Equipped with cup denester, agitated product hopper, (4) 16 ounce pistons with (4) bottom up filling heads and roll stock film with heat sealing section. Control panel has Allen Bradley PLC controller with start, stop, reset and e-stop push buttons and on / off switches and statis light bar. Mounted on stainless steel frame.
OAD: 140" L x 66" W x 90" H
Automatic 1 by 3 in-line cup filler. Size range: up to 5" in Diameter; up to 7" in Height. Equipped with denest station, three 32 ounce pistons with rotary valves, over lid station and discharge. Speed dependant on materials and application.
OAD= 156" L x 46" W x 87" H
Automatic, S/S, 1 x 3 , USDA – wash down, intermittent motion piston style cup filler. Capable of a container size range to 5" diameter and height to 7 ". Equipped with 32 ounce piston with rotary valve capable of down to a 7.25oz fill. Shuttle type overlidder with magazine that are well suited for the "tamper evident " and flat style lids. Automatic container eject. Unit will denest container from a magazine, fill product, overlid and discharge container. Can be used with either paper or plastic containers. Last running in a dairy operation. OAD= 156"L x 46"W x 87"H
World Cup, Model 12-32, Automatic, stainless steel, 12 pocket rotary cup filler, roll stock applicator, heat sealer and over lidder with number on cups per minute – depending on materials and application. Container size: up to 4¾" OD. Fill range: 1oz. to 32 oz. both with proper change parts. Equipped with 30" rotary table and has 12 cup pockets set on 5¾" centers, 24" long empty cup magazine, 38" long lid magazine, rotating bottom up fill, no container / no fill, roll stock film heat sealing station, press on over lidder and ram arm eject. Control panel has PLC controller with sealer, heater dropper on / off switches table jog stop run switch, vari-speed dial and temperature heat controller with start, reverse and e-stop push buttons. Mounted on stainless steel frame with casters and interlock safety guarding. Change parts required to accommodate size and fill ranges.
OAD: 56" L X 54" W 96" H
Oystar Model Dual 10 pocket, 2 x 10 configuration automatic, inline, stainless steel, 3A sanitary design, cup filler and sealer rated up to 700 containers per minute – depending on materials, application and container being run. Fill range: 0.5 to 16.9 onces, container size range 67.4 mm to 70mm OD and 55.2mm to 77.5mm in Height (with proper change parts). Has 9" index and denests, fills, and foil heat seals the containers. Equipped with dual (10) lane cup denester, 55" long x 5-1/4" wide (10) pocket cup carrier with 3-1/4" ID pockets set on 5" centers and has dual (10) head piston filling banks, with 1-1/4" OD positive cut off filling nozzles and (4) jacketed product hoppers (2) for each bank of filling heads, with product temperatures from 35°F to 45°F, reciprocating pre-cut, foil lid pic-n-place (10) lane heat sealing station and container discharge section. Control panel has A/B controller. Mounted on heavy duty stainless steel frame with interlock safety door guarding.
OAD: 366" L x 90" W x 92" H
Osgood, Model 6400, (6) lane, inline, stainless steel, single index, FOB, (fruit on bottom) tamper evident cup filler, heat sealer and over lid applicator rated from 24 to 240 cups per minute – depending on materials, application and machine configuration. All stainless steel construction. Equipped with (6) lane pick and place cup denster, (2) 24" x 24" stainless steel product hoppers, with dual (6) servo driven pistons one for the FOB (fruit on bottom) and the other for the product (yogart) with 3/4" OD positive cut off nozzels up to (3) flavor capacity. 24" long x 4" wide cup carriers with (6) 3" ID cup pockets set on 5" centers, roll stock film and heat sealing stations with knife cut off assemblies and 45" long (6) lane powered roller, lid magazine and snap on over lid application section. Control panel has touch screen HMI controls with start, stop, e-stop push button and statis light. Mounted on heavy duty stainless steel frame with safety door guarding. Change parts required to accommodate different size range.
OAD: 326" L x 70" W x 88" H
World Cup, Model 12-32, Automatic, stainless steel, 12 pocket rotary cup filler and over lidder with number of cups per minute – depending on materials and application. Fill range: 1oz to 32 oz. Container size up to: 4¾" Diameter. Equipped with 30" rotary turn table, 24" cup magazine with pull down cup denester, piston filler, bottom up fill, no container / no fill, lid applicator and sweep arm reject. Control panel has A/B controller with on / off switches for dropper, filler, bottom up fill and lidder. Variable speed control dial and e-stop. Mounted on stainless steel frame with casters.Change parts required to accommodate different size ranges.
OAD: 64"L x 55"W x 76"H
World Cup, Model 8-80, automatic, 8-pocket, intermittent motion, stainless steel, rotary cup filler nd roll stock film heat sealer with number of cups per minute / hour – depending on materials and application. Fill range: up to 80 oz. Container size up to: 6.5" in Diameter. Equipped with 30" rotary OD turn table, 14" ID x 24" deep product hopper, 13" cup magazine with screw cup denester, piston filler, positive cut off nozzles, roll-stock film, pneumatic heat sealing head, over lidder and sweep arm reject. A/B controller has control panel with fill, foil, heat, table, lidder and jog on and off switches with temperature controller and e-stop. Mounted on stainless steel frame with casters.Change parts required to accommodate size range.
OAD: 57" L x 50" W x 77" H
Osgood, Model 3600-E, 3 lane, in line, stainless steel, cup filler, heat sealer and over lid applicator rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Currently set for (3) up pattern with 4-1/4" OD cup pockets set on 5½” centers. Equipped with (3) lane cup denster, stainless steel product hopper, (3) servo driven piston filler with 4" ID x 6½" long pistons with positive cut off nozzels, roll stock film and heat sealing stations with knife assemblies, 48" long (3) lane powered roller lid magazine and snap on over lid section. Control panel has A/B CPU controller with touch screen HMI controls with start, stop, e-stop push button and statis light. Mounted on heavy duty stainless steel frame. Change parts required to accommodate size range.
OAD: 175"L x 45"W x 75"H
World Cup Model 12-32, Automatic, stainless steel, 12 pocket rotary cup filler, roll stock applicator, heat sealer with number on cups per minute – depending on materials and application. Container size: up to 4-3/4" OD. Fill range: 1oz to 32 oz. both with proper change parts. Equipped with 30" rotary table and has (12) 1-1/2" ID cup pockets set on 6" centers with 24" long empty cup magazine, 12" ID x 24" Deep product hopper, with 3/4" OD positive cut off nozzle, bottom up fill, no container / no fill, roll stock film and heat sealing station, ram arm reject. Control panel has PLC controller with filler, sealer, heater and dropper on/off switches table jog stop run switch, vari-speed dial and temperature heat controller with start, reverse and e-stop push buttons. Mounted on stainless steel frame with casters and interlock safety guarding. Change parts required to accommodate size and fill range.
OAD: 58" L x 48" W x 80" H With Hopper 95" H With Guarding
World Cup Model 12-32, Automatic, stainless steel, 12 pocket rotary cup filler, roll stock applicator, heat sealer with number on cups per minute – depending on materials and application. Container size: up to 4-3/4" OD. Fill range: 1oz to 32 oz. both with proper change parts. Equipped with 30" rotary table and has (12) 1-1/2" ID cup pockets set on 6" centers with 24" long empty cup magazine, 12" ID x 24" Deep product hopper, with 3/4" OD positive cut off nozzle, bottom up fill, no container / no fill, roll stock film and heat sealing station, ram arm reject. Control panel has PLC controller with filler, sealer, heater and dropper on/off switches table jog stop run switch, vari-speed dial and temperature heat controller with start and e-stop push buttons. Mounted on stainless steel frame with casters and interlock safety guarding. Change parts required to accommodate size and fill range.
Holmatic Model OF-2340, Automatic, 4-up, inline cup filler, roll stock film, die cutter, heat sealer and over lidder rated 10 to 40 indexes per minute with number of cups – depending on materials, application and machines configuration. All stainless steel and anodized aluminum construction. Cup size: up to 5" in Diameter; and 6-1/4" in Height. Fill size: up to 41oz + / – 0.5%, both with proper change parts. Equipped with (4) lane 32" long automatic belt fed empty cup magazines and denesters, cup conveyor has 22-1/2" long plates with (4) across 4-1/2" ID cup pockets set on 6" centers, (4) 7" long x 2" OD pistons with rotary valves and 1-1/2" OD positive shut off nozzles, 23" long roll stock film rollers with (4) die cutters, heat sealers and cup over lid magazines, with spinning roller over lid applicator. Control panel has A/B controller with A/B Panelview and (4) heat sealer controllers, with system reset, cycle, e-stop push button controls and statis light bar. Mounted on stainless steel frame with interlocking cage style safety guarding and leveling legs..
OAD: 192" L x 72" W x 107" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.