See us at PACK EXPO International in Chicago, IL Nov. 3-6. Register for FREE with code 78Q56
Home » Kettle » Triple Motion » Page 2
Frain Industries can help you with your triple motion kettle project no matter how big or small your kettle needs. Kettles with triple motion agitation have three different kinds of agitation. (Usually agitators moving in two different directions and a homogenizer). Triple motion kettles provide greater mixing action than double motion kettles.
Lee Model 60D12T, 316 S/S, jacketed 60 gallon, triple motion kettle. Equipped with bolt down dome top, tilt out agitation, thermo well and dish bottom with 2-1/2" OD sanitary center bottom discharge at 14" floor clearance. Control panel with digital display and start, stop and e-stop. Mounted on (4) leg stainless steel base. Variable speed.
Agitation: scrape surface, counter rotating & high shear / homogenizing.
Vessel Dimensions: 36" OD; 32" Deep.
Jacket rated: MAWP 90psi @ 332°F; MDMT of -20°F @ 90psi.
Internal Pressure Rated: MAWP 15psi @ 250°F; MDMT of -20°F @ 15psi.
Vessel Designed for Vacuum Service Internal
National Board: 5301
OAD: 74" L x 48" W x 105" H
Lee, Model 60D12T, 316 stainless steel jacketed kettle. Vessel Dimensions: 32" ID x 30" deep with a 15" straight wall. Equipped with a tilt out bridge mounted double motion scrape agitator powered by a 2 Hp drive with a variable speed gear box, high shear agitator powered by a 3 hp direct drive, 2½" OD / 2"ID tri-clamp style discharge with ball valve and 11½" ground clearance. Mounted on base frame with casters.
Jacket Fittings:(2) ¾" NPT
MAWP: 90 PSI @ 332° FNat’l Brd: 4229
OAD: 64"L x 36"W x 85"H
Jaygo Model DISHO, 400 liter, 100 gallon, stainless steel, vacuum, homogenizing and dispersion system for low or high viscosity liquids used in the food, pharmaceutical and cosmetic Industries, with amount of product per hour – depending on materials and application. The shell and top / bottom heads are 7 gauge, 316 stainless steel construction and the side and bottom jackets are 12 guage, 304 stainless steel construction. Equipped with 32" OD x 37-3/4" long jacketed straight wall mixing vessel has hydraulic flip-top cover with 4" OD lighted sight glass port and top mounted 3 Hp variable speed motor drive with christmas tree type agitation and has both side and bottom scrapers. Full side and bottom jacket rated to MAWP of 100 Psi @ 338 Deg F, and MDMT of -20 Deg F @ 100 Psi. with (2) 1", 1-1/2" and 2" OD threaded jacket ports and has vacuum rating of 29.92. Cone Bottom with DISHO high speed multiple chamber homogenizing mill with 50 Hp motor drive. Control panel has agitation, vacuum pump, sight glass light, speed on / off and engine power and stop controls. Mounted on stainless steel skid.
OAD: 104" L x 38" W x 110" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.