Mixers - Liquid Mixing Machines

Fristam Pumps Mixer Liquid Triblender 20-53

• Manufacturer: Fristam Pumps
• Model Number: 20-53
• Frain Number: R32310

Fristam Model 20-53, 316 stainless steel, in-line, integrated mixing system, incorporates Model FZX-2200 liquid ring pump with Model FS-3532 high shear mixer / emulsifier. Equipped with 23-1/2" OD x 24" long stainless steel conical dry product hopper with safety grid and lift off cover. Fristam Model FZX-2200 liquid ring pump has 10" OD / 8" ID front plate with 8" OD impeller and front 2-1/2" OD liquid product in feed port with 15 Hp motor drive. Model FS-3532 high shear mixer has 7" OD rotor / stator mixing head with 25 Hp motor drive, both and sanitary 2-1/2" OD sanitary ports. Control panel has FZX / FS pump and blender start, stop, e-stop push buttons, main machine / vibrator on / off switches. Mounted on (4) leg stainless steel frame. Rated from 55 to 120 liquid gallons and 23 to 225 pounds of dry product per minute – depending on materials and application

OAD: 78" L x 31" W x 46" H

Breddo Mixer Liquid Liquefier LTDWW

• Manufacturer: Breddo
• Model Number: LTDWW
• Frain Number: R31000

Breddo Model LDTW, 200 gallon, stainless steel, high shear, side wall jacketed liquefier with amount of product per hour – depending on materials and application. Square chamber dimensions of: 38" long x 38" wide x 32" straight wall. Flat top has 22" OD top man way with flip up bold down cover and (3) 3-1/2" OD, 3" ID, (1) 2-1/2" OD, 2"ID, (1) 2"OD, 1-1/2" ID sanitary top ports. Bottom cone jacket with pressure tested at 120psi, with (3) 1-5/8" OD, 1-1/4" ID jacket ports and interior bottom 6 hole / 3 wing impeller with 25 Hp direct bottom mounted motor drive. Cone bottom has 1-5/" OD, 1-1/4" ID" OD sanitary side bottom discharge with 24" ground clearence. Mounted on (4) leg stainless steel frame.
Remote control panel with start, stop, e-stop push buttom controls. Mounted on 36" x 36" stainless steel frame with locking casters.

OAD: 44" L x 44" W x 72" H Liquifer
36" L x 36" W x 60" H Control Panel

Breddo Mixer Liquid Liquefier LDD50

• Manufacturer: Breddo
• Model Number: LDD50
• Frain Number: R31350

Breddo, Model LDD, 50 gallon, stainless steel, bottom direct drive, single wall liquefier with gallons of product per hour – depending on materials and application. Outer chamber dimensions of: 24" long x 24" wide x 24" straight wall. Equipped with 18" ID top man way with flip up, clamp down cover and bottom 6 hole / 3 wing general purpose impeller with 7.5 Hp bottom direct motor drive. Cone bottom has 2-1/2" OD / 2" ID sanitary side bottom discharge with clamp on 3-1/2"OD / 2-3/4"ID sanitary port with 22" floor clearence. Mounted on stainless steel (4) leg tubular frame.

Top Access Ports:
(2) 2-1/2 "OD / 2"ID Sanitary Tri-Clamp

OAD: 24" L x 24" W x 59" H

Breddo Mixer Liquid Liquefier LDT50

• Manufacturer: Breddo
• Model Number: LDT50
• Frain Number: R31300

Breddo, Model LDT, 50 gallon 316 stainless steel single wall liquefier. Chamber dimensions: 24" long x 24" wide with 22" straight wall. Equipped with 18" OD top man way with flip up bolt down cover and safety grid, bottom 6 hole / 3 wing general purpose impeller, 2½" OD / 2" ID Tri-clamp side bottom discharge with butterfly valve and 23" floor clearence. Mounted on (4) leg frame.

Top Access:
(1) 3½"OD / 3"ID Tri-Clamp
(3) 2½"OD / 2"ID Tri-Clamp

OAD: 31"L x 25"W x 60"H

Breddo Mixer Liquid Liquefier LDT200

• Manufacturer: Breddo
• Model Number: LDT200
• Frain Number: R31001

Breddo Model LDT, 200 gallon, stainless steel, high shear, single wall liquefier with amount of product per hour – depending on materials and application. Chamber dimensions of: 39" x 39" x 32" straight wall. Equipped with 20" man way, (5) 2-1/2" OD (2" ID) sanitary top ports, CIP spray ball, 12" diameter impeller with 25 Hp motor. Cone bottom has 3" OD (2-1/4" ID) sanitary side bottom discharge with 29" ground clearance.

OAD: 42" L x 42" W x 76" H

Breddo Mixer Liquid Liquefier LDT

• Manufacturer: Breddo
• Model Number: LDT
• Frain Number: R28350

Breddo, Model LDT, 50 gallon 304 stainless steel single wall liquefier with amount of product per hour – depending on materials and application. Chamber dimensions: 24" x 24" x 24" straight wall. Equipped with 18" diameter top man way with flip up bolt down cover, (2) 2½" OD / 2" ID tri-clamp style top inlet ports, bottom 6 hole / 3 wing general purpose impeller and bottom 15 Hp bottom motor drive, 3" OD / 2½" ID Tri-clamp side bottom discharge with 23" floor clearence. Control panel has start and e-stop controls. Mounted on stainless steel (4) leg tubular frame.

OAD: 34"L x 25"W x 60"H

Breddo Mixer Liquid Liquefier 50 GAL, LDT

• Manufacturer: Breddo
• Model Number: 50 GAL, LDT
• Frain Number: R28351

Breddo, Model LDT, 50 gallon 304 stainless steel single wall liquefier with amount of product per hour – depending on materials and application. Chamber dimensions: 24" x 24" x 24" straight wall. Equipped with 18" diameter top man way with flip up bolt down cover, (2) 2½" OD / 2" ID tri-clamp style top inlet ports, bottom 6 hole / 3 wing general purpose impeller, with bottom 10 Hp motor drive, 3" OD / 2½" ID Tri-clamp side bottom discharge with 21" floor clearence. Mounted on stainless steel (4) leg tubular frame.

OAD: 35"L x 31"W x 60"H

Walker Mixer Liquid Liquefier MT-201

• Manufacturer: Walker
• Model Number: MT-201
• Frain Number: R29400

Walker, Model MT-201, 100 gallon 316L stainless steel insulated liquefier with amount of product per hour – depending on materials and application. Chamber dimensions: 46" diameter x 32" deep with 19" straight wall. Equipped with 21" OD top man way with flip up bolt down cover, scrape agitation powered by 2 Hp motor drive, 6½" adjustable baffle, Thermowell, CIP spray balls, side and bottom jacketed, 10" OD bottom 6 hole / 3 wing general purpose impeller powered by 20 Hp motor drive and 3" OD / 2½" ID Tri-clamp side bottom discharge with 24" floor clearence. Mounted on stainless steel (4) leg tubular frame.

Top Access:
(1) 3½"OD / 3"ID Tri-clamp
(1) 2½"OD / 2"ID Tri-clamp
(1) 2"OD / 1½"ID Tri-clamp

Jacket Access:
(4) 2"OD / 1½ID Tri-clamp

Nat’l Brd:6572
MAWP:150 PSI @ 338°F
MDMT:-20°F @ 150 PSI

15,000 cps Max with Side Scrape Attachment

OAD: 56"L x 55"W x 86"L

APV Mixer Liquid Liquefier 50 GAL

• Manufacturer: APV
• Model Number: 50 GAL
• Frain Number: R30054

APV, 50 gallon, 304 stainless steel, single wall, high shear liquefier with amount of product per hour – depending on materials and application. Vessel dimensions of: 26" long x 26" wide x 20" straight wall. Equipped with 18" OD man way with flip top bolt down cover, bottom 10" OD 6 hole / 3 wing impeller and side mounted 7½ Hp motor drive. Cone bottom has 3" OD / 2½" ID side bottom discharge with 25" ground clearence. Control panel with push button start / stop control and variable speed control.

OAD: 68"L x 38"W x 75"H

Breddo Mixer Liquid Liquefier LORWWSS 100 Gal, S/S, Scrape, Cone Bottom

• Manufacturer: Breddo
• Model Number: LORWWSS
• Frain Number: R30009

Breddo Model LORWWSS, 100 gallon, 316L stainless steel, two zone jacketed, liquefier with amount of product per hour – depending on materials and application. Interior dimensions: 48" diameter x 15" straight wall x 11" long cone. Equipped with hinged top covers, 8-1/2" product inlet with pneumatic slide gate, side and bottom scrape agitation with bottom 6 hole / 3 wing impeller and 50 Hp side bottom mounted motor drive. Full jacket rated at 125psi @ 400 deg f with 1-3/4" inlet / outlets, Cone bottom has 2-3/4" center bottom discharge and butterfly valve with 16-1/4" discharge height and control Panel with VFD and start, stop, e-stop controls. Mounted on (4) leg frame. National Board #21333

OAD: 84" L x 64" W x 66" H

Tri Clover Mixer Liquid Triblender F2116MD

• Manufacturer: Tri Clover
• Model Number: F2116MD
• Frain Number: R23181

316 S/S tri-blender capable of processing up to 45 gallons of liquid per minute and dispensing powder at 50 lbs per minute (absorption dependent on model and product characteristics). Has 10 gallon 304 S/S hopper, liquid supply pump, 1 1/2" diameter triclover supply pump inlet, 1 1/2" diameter triclover tri-blender outlet, and independent push button controls for tri-blender and liquid supply pump. Mounted on stainless steel dolly with 8" diameter solid rubber wheels.

OAD: 38"L x 31"W x 55"H

APV Crepaco Mixer Liquid Liquefier 100 GALLON

• Manufacturer: APV Crepaco
• Model Number: 100 GALLON
• Frain Number: R30645

APV Crepaco, 100 gallon, 304 stainless steel, high shear, jacketed liquefier with gallons of product per hour – depending on materials and application. Chamber dimmensions: 40" in Length; 40" in Width; 16" straight wall. Equipped with 24" x 24" manway with flip top cover, high shear 6 hole / 3 wing impeller driven by side bottom 25 Hp motor drive. Cone bottom with 2½"OD / 2"ID Tri-Clamp discharge port with 18" floor clearence. Mounted on stainless steel tubular base frame.

Top Access:
(1) 3½"OD / 3"ID Tri-Clamp
(4) 2½"OD / 2" ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp

Jacket Access:
(2) 1" NPT
(1) ¾" NPT

MAWP: 95 psi @ 350°F
MDMT: -20°F @ 95 psi

OAD: 62.5"L x 48"W x 55"H