Blommer Machines


Blommer Machines In Stock

Blommer Candy Chocolate Melter 7,500 LB

  • Manufacturer: Blommer
  • Model Number: 7,500 LB
  • Frain Number: 5F9877

Blommer 7,500 lb capacity, vertical, carbon steel, low pressure water jacketed, chocolate melting and mixing vessel. Pounds of product per hour – depending on materails and application. Inner chamber dimmensions: 72" ID x 48" straight wall. Equipped with flat top, dual flip top covers and bridge mounted sweep agitation, 5 Hp drive, with safety guarding and 4" OD shaft with side scrape paddles. Full low pressure water jacket rated to 5psi with interior baffles to direct the water flow through out the jacket, to a circulation heater and back to jacket (4) 2" OD side and (2) 1-1/2" OD bottom threaded jacket in / outlets and Watlow side mounted water heater circulation system. Dish bottom has 5-1/2" OD threaded center bottom discharge with 12" floor clearance, temp probe and Mounted on (4) carbon steel legs.

OAD: 88" L x 82" W x 90" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 60,000 LB

  • Manufacturer: Blommer
  • Model Number: 60,000 LB
  • Frain Number: 5F9867

Blommer 60,000 lb, carbon steel, horizontal, low pressure water jacketed, chocolate melting and mixing vessel. Inner chamber dimensions: 170" in Length; 84" in Width; 118" in Depth. Equipped with enclosed top, 24" x 24" man way with hinged flip up cover, paddle style mixer with 7" OD shaft driven by 15 Hp motor drive and gear reducer with 25 – 1 ratio. 3/4 low pressure water jacket 5psi, with (4) inside welded baffles which divide jacket into (5) sections to direct the flow of water from front to back of each section and then through a circulation heater and back through the jacket sections, with (2) 2-1/2" ID threaded side jacket in / outlets each side and temperture probe. 6" OD threaded center bottom discharge with 7" discharge height without leg extentions and 26" discharge height with extentions and has (6) 1-1/2" OD threaded bottom jacket water drains. Control panel with on / off switch hand / off / auto control dial, e-stop and is mounted on (4) legs.

OAD: 216" L x 90" W x 129" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 17,500 LB

  • Manufacturer: Blommer
  • Model Number: 17,500 LB
  • Frain Number: 5G5856

Blommer, carbon steel, water jacketed chocolate mixer. Number of pounds per hour – depending on materials and application. Vessel dimensions: 72" in Diameter; 126" long. Low pressure water jacket. Equipped with a 24" x 24" manway with lift off cover, scrape agitation powered by a 15 HP drive, (1) 4" NPT center bottom discharge with 25" ground clearance and (1) 1½" NPT front discharge with 28" ground clearance.

Access:
(2) 3" NPT

Jacket:
(4) 1½" NPT

OAD: 194" L x 77" W x 112" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 100,000 LB

  • Manufacturer: Blommer
  • Model Number: 100,000 LB
  • Frain Number: 5H2930

Blommer Model Dual Chamber, horizontal, carbon steel, 100,000 pound total, 50,000 pound each chamber, low pressure water jacketed, chocolate melting and mixing vessel, with pounds of product per hour – depending on material and application. Inner chamber dimensions: 60" in Length; 102-1/2" in Width; 128" in Depth each chamber. Equipped with covered flat top with 24 x 24 flip up covers each chamber with (1) 2" OD, (1) 4" OD threaded top ports has paddle style mixer set on 5" OD shaft, driven by 15 Hp (4) belt end motor drive with safety guarding. Low pressure, 1/2 water jacket each chamber with (4) 2-3/4" OD / 2-1/2" ID inner threaded jacket ports and (1) 2-1/2", (1) 2" threaded end bottom ports with temperature gauges and 6" OD center bottom discharges with 6" discharge height each chamber. Mounted on heavy duty, carbon steel, bolt down base frame.

OAD: 282" L x 111" W x 126" H

=== End ===

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 15000 LBS

  • Manufacturer: Blommer
  • Model Number: 15000 LBS
  • Frain Number: 5G9501

Blommer, 15,000 lbs, carbon steel, low pressure jacketed chocolate melting tank with number of pounds per hour – depending on materials, application and machine configuration. Vessel dimensions: 64" in Diameter; 95" in length and is low pressure jacketed. Equipped with 24" x 24" manway with lift off cover, lift out safety grate, and 2" ID product feed port. Sweep agitation and is powered by 15 Hp motor drive. 1" NPT front bottom discharge with 28" ground clearance and 7" x 7" flanged" center bottom discharge with 8" ground clearance.

Jacket:
(2) 2¼" NPT
(2) 2" NPT
(4) 1½" NPT

OAD: 144" L x 66" W x 98" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 60,000 LB

  • Manufacturer: Blommer
  • Model Number: 60,000 LB
  • Frain Number: 5F9868

Blommer 60,000 lb, carbon steel, horizontal, low pressure water jacketed, chocolate melting and mixing vessel. Inner chamber dimensions: 170" in Length; 84" in Width; 118" in Depth. Equipped with enclosed top, 24" x 24" man way with hinged flip up cover, paddle style mixer with 7" OD shaft driven by 15 Hp motor drive and gear reducer with 25 – 1 ratio. 3/4 low pressure water jacket 5 psi with (4) inside welded baffles which divide jacket into (5) sections to direct the flow of water from front to back of each section and then through a circulation heater and back through the jacket sections, with (2) 2-1/2" ID threaded side jacket in / outlets each side and temperture probe. 6" OD threaded center bottom discharge with 7" discharge height without leg extentions and 26" discharge height with extentions and has (6) 1-1/2" OD threaded bottom jacket water drains. Control panel with on / off switch hand / off / auto control dial, e-stop and is mounted on (4) legs.

OAD: 216" L x 90" W x 129" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 7,500 LB

  • Manufacturer: Blommer
  • Model Number: 7,500 LB
  • Frain Number: 5F9875

Blommer 7,500 lb capacity, vertical, carbon steel, low pressure water jacketed, chocolate melting and mixing vessel. Inner chamber dimmensions: 72" ID x 48" straight wall. Equipped with flat top, dual flip top covers and bridge mounted sweep agitation, 5 Hp drive, with safety guarding and 4" OD shaft with side scrape paddles. Full low pressure water jacket rated to 5psi with interior baffles to direct the water flow through out the jacket, to a circulation heater and back to jacket (4) 2" OD side and (2) 1-1/2" OD bottom threaded jacket in / outlets and Watlow side mounted water heater circulation system. Dish bottom has 5-1/2" OD threaded center bottom discharge with 12" floor clearance, temp probe and mounted on (4) legs.

OAD: 88" L x 82" W x 90" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 50,000LBS

  • Manufacturer: Blommer
  • Model Number: 50,000LBS
  • Frain Number: 5G9943

Blommer, 50,000lb. tank with (2) 25,000 lbs, chambers, carbon steel, low pressure jacketed chocolate melting tank. Pounds of product per hour – depending on materails and application. Vessel dimensions: 96" in Diameter; 100" in length (each chamber) with low pressure jacket. Equipped with (2) 24" x 24" manway with lift off covers and (4) 2" NPT charge ports. Sweep agitation and is powered by 15 Hp motor drive. (2) 3" NPT front bottom discharges.

OAD: 250"L x 92"W x 125"H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 60,000 LBS

  • Manufacturer: Blommer
  • Model Number: 60,000 LBS
  • Frain Number: 5G9917

Blommer, 60,000 lbs, carbon steel, horizontal, low pressure water jacketed, chocolate melting and mixing vessel. Pounds of product per hour – depending on materails and application. Inner chamber dimensions: 168" in Length; 91" in Width; 107" in Depth. Equipped with enclosed top, 24" x 24" man way with hinged flip up cover, paddle style mixer with 4½" OD shaft driven by 15 Hp motor drive, low pressure water jacket, 24 Kw circulation heater, 3" NPT bottom end discharge with 3" discharge height without leg extentions and 15" discharge height with extentions. Includes shut off disconnects for agitation, heater and jacket pump.

Top Ports:
(3) 3" NPT
(1) 2" NPT

OAD: 230"L x 98"W x 125"H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter

  • Manufacturer: Blommer
  • Model Number:
  • Frain Number: 5G5852

Blommer Model 9000 lb, 160 cu ft, total working capacity carbon steel, low pressure jacketed, chocolate melter and paddle mixer. Pounds of product per hour – depending on materails and application. Inner mixing chamber dimensions of: 160" in Length; 46" in Width; 43" in Depth. Equipped with dual 48" long x 24" wide flip up covers and has (3) sets of 3" wide x 3/4" thick carbon steel inner dual ribbons with 3" x 3" OD spokes set on 6" OD carbon steel shaft. 9" OD flanged end bottom discharge, with hand operated slide gate valve with 5" floor clearence and 3" ID threaded opposite end bottom port and side mounted Chromalax water heater circulation system. 7.5 hp sprocket to motor drive with safety guarding and start, stop, e-stop push button controls. Mounted on painted mild steel base frame.

OAD: 154" L x 48" W x 71" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 45,000 LB

  • Manufacturer: Blommer
  • Model Number: 45,000 LB
  • Frain Number: 5G5860

Blommer, 45,000 lb, carbon steel, horizontal, low pressure ¾ jacketed, two chamber chocolate melting and mixing vessel. Pounds of product per hour – depending on materails and application. Inner chamber dimensions: 145" in Length; 84" in Width; 96" in Depth. Equipped with an enclosed top, (2) 24" x 24" man ways with lift off cover, paddle style mixer with 4½" OD motor shaft driven by a 25 Hp motor, level sensor, (2) 6" NPT bottom discharges with 1" ground clearance and front 7½"OD 4-bolt pattern flange discharge with 1" ground clearance.

Access Fittings:
(2) 6" open vents
(2) 5" open vents
(1) 4" open vent
(2) 3" open vents
(1) 2" open vent

Jacket:
(4) 2" NPT
(6) 1½" NPT

OAD: 201" L x 92" W x 110" H

Get a Free Quote Call: 630-629-9900

Blommer Candy Chocolate Melter 38,000 LB

  • Manufacturer: Blommer
  • Model Number: 38,000 LB
  • Frain Number: 5G5858

Blommer, 38,000 lb, carbon steel, horizontal, low pressure ¾ jacketed, chocolate melting and mixing vessel. Pounds of product per hour – depending on materails and application. Inner chamber dimensions: 120" in Length; 84" in Width; 100" in Depth. Equipped with an enclosed top, 24" x 24" man way with lift off cover, paddle style mixer with 4½" OD motor shaft driven by a15 Hp motor, thermometer, level sensor, 4" NPT center bottom discharge with 0" ground clearance and front 7½"OD 4-bolt pattern flange discharge with 0" ground clearance.

Access Fittings:
(1) 6" Open vent
(2) 5" Open vent
(1) 3" Open vent

Jacket:
(4) 2" NPT
(2) 1½" NPT
(4) 1¼" NPT

OAD: 186" L x 95" W x 117" H

Get a Free Quote Call: 630-629-9900