Lee Machines

Lee Kettle Single Motion 60D5S

• Manufacturer: Lee
• Model Number: 60D5S
• Frain Number: 5H3480

Lee, Model 60-D5S, 316 stainless steel jacketed kettle. Vessel Dimensions: 32" diameter x 24" deep with a 8" straight wall. Equipped with a bridge mounted anchor style scrape agitator with 7½" OD / 2½"ID flanged bottom discharge with 43" ground clearance. Mounted on (3) tubular leg frame on stainless steel base with casters.

Jacket Fittings:
(2) 1" NPT

MAWP: 45 PSI @ 300° F
Nat’l Brd: 8525

OAD: 52"L x 48"W x 105"H

Lee Kettle Double Motion 300LD9MT

• Manufacturer: Lee
• Model Number: 300LD9MT
• Frain Number: 5H3385

Lee, Model 300LD9MT, 300 Liter, 75 gallon, stainless steel, dual motion, scrape surface tilt agitation, internal vacuum rated and 1/2 steam jacketed kettle. Vessel dimensions of: 32" in Diameter; 34" in Depth. Equipped with heavy duty, bolt down cover, top mounted, tilt scrape surface agitation with 5 Hp motor drive and A/C inverter has touchpad controls with readout and main on / off switch. Dish bottom with 2"OD / 1½"ID Tri-Clamp center bottom discharge has 14" floor clearence and bottom flush mount RTD temperature sensor. Mounted on stainless steel base frame with casters.
UL Rated

Jacket Access:
(2) 1" NPT

Top Access:
(7) 2"OD / 1½"ID Tri-Clamp
(1) 3½"OD / 3"ID Tri-Clamp
(1) 7" OD Sight Port

Nat’l Brd: 5605
MAWP: 100 PSI @ 338° F (jacket)
MDMT: -20°F @ 100 PSI (jacket)

MAWP: 60/FV PSI @ 308° F (vessel)
MDMT: -20°F @ 60/FV PSI (vessel)

OAD: 69" L x 48" W x 72" H

Lee Tank SS JKT 1000L

• Manufacturer: Lee
• Model Number: 1000L
• Frain Number: 5H3041

Lee, 1000 liter capacity, 316L stainless steel, jacketed and insulated, internal vacuum tank. Vessel dimensions: 42" diameter x 54" deep with a 44" straight wall. Equipped with an 18" diameter bolt down manway, (1) thermowell and plug valve with 2"OD / ¾"ID Tri-Clamp style discharge with 11" ground clearance. Mounted on a forkliftable stainless steel base with casters.

Top Ports:
(2) 4½"OD / 4"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
(2) 2"OD / 1½"ID Tri-Clamp
(1) 2"OD / ¾"ID Tri-Clamp

Jacket Ports:
(2) 2"OD / ¾"ID Tri-Clamp

MAWP: 45 PSI @ 302°F (Vessel)
100 PSI @ 338°F (Jacket)

MDMT: -20°F @ 45 PSI (Vessel)
-20°F @ 100 PSI (Jacket)

Vac: FV (Vessel)

Nat’l Brd: 6793

OAD: 63"L x 53"W x 80"H

Lee Kettle Triple Motion 60D12T

• Manufacturer: Lee
• Model Number: 60D12T
• Frain Number: R28360

Lee Model 60D12T, 316 S/S, jacketed 60 gallon, triple motion kettle. Equipped with bolt down dome top, tilt out agitation, thermo well and dish bottom with 2-1/2" OD sanitary center bottom discharge at 14" floor clearance. Control panel with digital display and start, stop and e-stop. Mounted on (4) leg stainless steel base. Variable speed.

Agitation: scrape surface, counter rotating & high shear / homogenizing.

Vessel Dimensions: 36" OD; 32" Deep.

Jacket rated: MAWP 90psi @ 332°F; MDMT of -20°F @ 90psi.

Internal Pressure Rated: MAWP 15psi @ 250°F; MDMT of -20°F @ 15psi.

Vessel Designed for Vacuum Service Internal

National Board: 5301

OAD: 74" L x 48" W x 105" H

Lee Kettle Double Motion 500D9MT

• Manufacturer: Lee
• Model Number: 500D9MT
• Frain Number: R28290

Lee Model 500D9MT, 500 gallon, 316 stainless steel interior, 304 stainless steel external, double motion, scrape surface, jacketed kettle with pounds of product per hour – depending on materials and application. Vessel dimensions: 62" ID x 51" in Depth. Equipped with bridge mounted scrape surface & conter rotation tilt out agitation, dual flip top covers, 2" OD sanitary center bottom discharge with flush-bottom ball valve. Jacket, with MAWP of 90 psi @ 322 Deg F and MDMT of -20 Deg F @ 90 psi with (2) 2" OD 1-1/2" ID side and bottom threaded jacket in / outlet ports. Mounted on (3) stainless steel legs

OAD: 96" L x 68" W x 93" H

Lee Kettle Double Motion 350GAL

• Manufacturer: Lee
• Model Number: 350GAL
• Frain Number: 5H2440

Lee, 350 gallon capacity, stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 48" deep with a 20" straight wall. Equipped with lift up covers , 2 Hp bridge mounted scrape agitator with variable speed gearbox and 2½" OD / 2" ID seated bevel style bottom discharge valve with 90° elbow and 13½" ground clearance.

Jacket Ports:
(1) 2" NPT
(1) 1½" NPT
(2) 1" NPT

MAWP: 40 PSI @ 288°F

OAD: 84"L x 57"W x 96"H

Lee Kettle Double Motion 300-D9MT

• Manufacturer: Lee
• Model Number: 300-D9MT
• Frain Number: R28713

Lee Model 300-D9MT, 300 gallon, 316 stainless steel interior, 304 stainless steel exterior, 1/2 jacketed kettle with gallons of product per hour – depending on materials and application. Equipped with 44" OD x 44" Deep mixing bowl, dual flip top covers, bridge mounted scrape surface pnuematic tilt out agitation, with (1) 4-5/8" OD and (2) 2" OD sanitary top ports. 1/2 jacket with MAWP of 90 psi @ 332 Deg F and MDMT -20 Deg F @ 90 psi with (2) 2-1/2" ID threaded jacket inlet / outlet ports. Dish bottom has 5" OD center bottom discharge with bottom ball valve and 21" ground clearance. Mounted on (3) stainless steel tubular legs. National Board # 8633 and UL Rated.

OAD: 80" L x 58" W x 83" H

Lee Tank Processors (2) 200 GAL

• Manufacturer: Lee
• Model Number: (2) 200 GAL
• Frain Number: 5G8100

South Valley Manufacturing, dual 200 gallon capacity, 316 stainless steel single wall tanks. Vessel dimensions: 35½" diameter x 50" deep with dish style bottom. Equipped with flip up covers and (2) 25 Hp bottom side mounted Dixie mixer agitators. Unit mounted on a (4) leg stainless steel base frame platform with (2) 2½" OD / 2" ID tri-clamp style bottom discharges with 30" ground clearance.

Top Ports:
(1) 2½" OD / 2" ID Tri-Clamp
(2) 2"OD / 1½" ID Tri-Clamp
(2) 1¾" Open Vent

Side Ports:
(8) 2½" OD / 2"ID Tri-Clamp

OAD: 108"L x 91"W x 91"H

Lee Kettle Single Motion 20D

• Manufacturer: Lee
• Model Number: 20D
• Frain Number: R26452

Lee, Model 20D, vacuum rated 316 stainless steel half jacketed single motion kettle. Vessel Dimensions: 22" diameter x 9" straight wall. Equipped with a pneumatic Lightnin mixer with a 7" diameter 3 blade prop. Lift out bolt down cover with (4) 2"OD/1½"ID tri-clamp fittings and (1) 8¾" diameter manway with lift off lid. (2) 1" jacket inlets. Dish bottom equipped with a ball valve with 2"OD/1½"ID tri-clamp style discharge with 15" ground clearance. Unit mounted on (4) tubular legs and common base with locking casters.

Jacket: MAWP: 90 PSI @ 332° F
MDMT: -20° F @ 90 PSI

Internal: MAWP: 15 PSI @ 250° F
MDMT: -20°F @ 15 PSI

Nat’l Brd: 5315
OAD: 48"L x 28"W x 66"H

Lee Kettle Double Motion 3D9MT

• Manufacturer: Lee
• Model Number: 3D9MT
• Frain Number: R26104

Lee Model 3D9MT, 3 gallon, 316 stainless steel, jacketed, dual motion, scrape surface mixing kettle. Vessel dimensions: 9-/12" in Diameter; 10" in Depth. Equipped with bridge mounted, tilt out dual motion scrape surface agitation, 1/2 jacketed rated at MAWP of 90 psi @ 332°F. (2) 1" OD jacket inlet/ outlets. 1-1/2" OD center bottom discharge with 12" floor clearance and mounted on (3) stainless steel legs on base platform with water and steam in / out insulated piping with pressure gauges. National Board # 4475

OAD: 48" L x 38" W x 60" H

Lee Kettle Double Motion 20D9MS

• Manufacturer: Lee
• Model Number: 20D9MS
• Frain Number: R25771

Lee, model 20D9MS, 20 gallon, jacketed 304 stainless steel kettle. Bowl dimmensions: 21" diameter x 18"deep. Pressure rating: 50 psi @ 300° F. Equipped with bridge mounted variable speed double motion scrape agitation, Lexan covers, temperature probe, 1-1/2" jacket inlet / outlets, and a 2" OD Tri-Clover center bottom discharge with 12" ground clearance. Mounted on a stainless steel platform with casters.

OAD: 52" L x 28" W x 58" H

Lee Kettle Double Motion 10D9MT

• Manufacturer: Lee
• Model Number: 10D9MT
• Frain Number: R24650

10 gallon, 316 stainless steel, jacketed, dual motion, scrape surface kettle. Vessel dimensions: 18" in Diameter; 14" in Depth; 7" straight wall. MAWP: 90 psi @ 322°F. Equipped with a scrape agitator, removable top covers, 1" OD jacket inlet, 1" OD jacket outlet , and a 2" OD center bottom discharge with 15" of floor clearance. Mounted on a steel frame with locking casters.

OAD: 40" L x 46" W x 44" H