Fillers - Paste Filling Machines
Used Fillers - Paste Filling Equipment
Filler Paste Equipment – Paste fillers, or paste filling equipment, are designed to fill paste into glass, plastic, or other types of containers. Paste fillers use either pistons or other positive displacement mechanisms to feed the proper amount of paste into the container. The term paste filler can be misleading. Because of the operation of paste fillers, paste fillers can also be used to fill other products besides paste including salsas and other products with particulates. Paste fillers can be designed for semi-automatic or automatic operation. Semi-automatic paste fillers require operators to present containers below the paste filling nozzle and to trigger the operation of the paste filler. Automatic paste fillers automatically index containers below the paste filling nozzles and trigger paste filling operation without any required operator input. Automatic paste fillers are often integrated into fully automatic production and packaging lines. Paste fillers can also be designed to fill one or many containers at once. The most common type of paste fillers are piston paste fillers. Piston paste fillers utilize the draw back of a piston to pull product from a product hold tank into the piston. Once the piston is full, the rotary drum valve on the intake / discharge end of the piston rotates to direct product towards the paste filling nozzle. The rotary drum valve is used to connect the piston to either the product hopper or to the paste filling nozzle. (The size of the opening in the drum valve is often a good indication of the largest size particulate that can be process by the paste filler without degrading the particulate.) As the piston pushes forward, the product within the piston is push out of the piston, through the paste filling nozzle, and into the container. Once the piston is empty, the rotary drum valve rotates to connect the piston to the product hopper. The piston paste filler can then complete another cycle to fill another container (or group of containers). The maximum volume a particular machine can fill is determined by the volume of the piston. Pistons on a piston paste filler can be ???short stroked?? (not pulled back the entire way) to fill a smaller volume of paste. (???Short stroking?? a piston provides accurate fills to approximately 10% of maximum piston volume.) Also, different size pistons can be outfitted to a piston paste filler to provide different fill capacities for the machine.
Related Categories
Fillers - Paste Filling Equipment In Stock
MRM Elgin Filler Paste Over 4 Head RPF-8
- Manufacturer: MRM Elgin
- Model Number: RPF-8
- Frain Number: R40560
MRM Elgin, Model RPF-8, Automatic, 8-hd left to right, rotary piston filler rated from 30 to 150 containers per minute – depending on materials and application. Fill range: up to 35oz with accuracies of ± 0.5% by volume depending on product and machine configuration. Maximum container size: up to 5" in Diameter; up to 12" in Height. Equipped with 4½" wide x 110" long through conveyor with an infeed/discharge height of 36¾", 30" worm screw to star wheel indexing, 13½" diameter x 22" deep (14 gallon) stainless steel reservoir with level detector, 7" x 6" container pedestals, 7/8" OD nozzles set on 9" centers, no container / no fill, E-stop and safety guarding. Mounted on stainless steel frame.
OAD: 110"L x 54"W x 80"H
Get a Free Quote Call: 630-629-9900
Geyer Filler Paste Over 4 Head SL58
- Manufacturer: Geyer
- Model Number: SL58
- Frain Number: 5D7463
Geyer inline piston filler with number of containers per minute – depending on materials, application and machine configuration. Equipped with 114" long x 4" wide in feed conveyor with stainless steel table top belt and right angle transfer into filling area via walking beam and pin-type push bars, 40 gallon agitated product hopper, six 32oz pistons, 7/8" nozzles, bottom up fill, no container/no fill and 86" long x 6" wide discharge conveyor with stainless steel belt.
OAD: 154" L x 78" W x 64" H
Get a Free Quote Call: 630-629-9900
Simplex Filler Paste Twin F
- Manufacturer: Simplex
- Model Number: F
- Frain Number: 5D8121
Inline, 2 head piston filler, rated at speeds 2 to 20 containers per minute – depending on materials, application and machine configuration. Fill range of: 16 – 128 ounces. Equipped with 10′ indexing conveyor, 29" L x 20" W x 21" D, S/S product hopper and two one gallon stainless steel pistons with 1" ID nozzles set on 8" centers.
OAD: 125" L x 74" W x 76" H
REB Inc Filler Paste Twin TWIN PISTON
- Manufacturer: REB Inc
- Model Number: TWIN PISTON
- Frain Number: 5H7742
REB, semi-automatic, stainless steel, dual head piston filler and depositor with number of containers per minute / hour – depending on materials, application and operator dexterity. Rated to 128 oz per piston. (with proper change parts). Equipped with 16" ID x 20" deep stainless steel product hopper, (2) 5" ID x 16" long (128oz) pistons and (2) 2"OD / 1½"ID Tri-clamp discharge connections. Mounted on stainless steel drip pan base.
OAD: 80" L x 45" W x 50" H
Get a Free Quote Call: 630-629-9900
Cavalla Filler Paste Twin CONTACT 110 SM
- Manufacturer: Cavalla
- Model Number: CONTACT 110 SM
- Frain Number: R36420
CMI Industries, Model Contact 110 SM, lipstick filling machine. Rated from 15 to 20 pieces per min. Equipped with 48" long mould pre-heat tunnel, (2) head peristaltic pump hot filler with diving nozzles and 16" diameter x 17" deep agitated supply hopper, top heat station, 103" long (3) zone chiller, 34" diameter rotary puck station, (4) head stick demould / load station and (4) head stick twist-to-close station. Control panel with Siemens controller and touch screen HMI.
OAD: 160"L x 90"W x 104"H (Filler)
48"L x 31"W x 52"H (Supply Hopper)
Orics Ind Filler Paste Twin VFND1603
- Manufacturer: Orics Ind
- Model Number: VFND1603
- Frain Number: 5H6308
Orics, Model VFND1603, automatic, stainless steel, 3 head piston filler with hopper. Rated from 5 to 30 cycles per minute with number of containers – depending on materials and application. Fill size range: 1 oz to 20 oz (per piston). Equipped with 18" diameter x 27" deep stainless steel product hopper with top cover. (3) 3" ID x 6" long stainless steel air assist pistons and (3) 2"OD / 1½"ID Triclamp discharge connections. Mounted on stainless steel (4) leveling leg frame with casters.
OAD: 36"L x 30"W x 75"H
Get a Free Quote Call: 630-629-9900
Autoprod / Oystar Filler Paste F-3
- Manufacturer: Autoprod / Oystar
- Model Number: F-3
- Frain Number: 5H3780
Autoprod / Oystar, Model F-3, inline, stainless steel (3) piston depositor. Containers per minute – depending on materials, application, environment and machine configuration. Equipped with 17" long x 12" wide x 24" deep conical product hopper and 96" long x 12" wide delran conveyor with 36" in feed and discharge height. (3) 1/2" ID pistons, set on 3-1/2" centers and actuator valve. Control panel has machine on / off / auto and fill volume, filler speed, conveyor on / off and conveyor variable speed control dials with e-stop. Mounted on stainless steel base frame, with casters and leveling legs.
OAD: 96" L x 46" W x 70" H
Get a Free Quote Call: 630-629-9900
Simplex Filler Paste Over 4 Head SP10HEADAIR
- Manufacturer: Simplex
- Model Number: SP10HEADAIR
- Frain Number: 5C5141
Ten (10) head stainless steel paste filler /depositor with jacketed 10 gallon scrape agitated hopper. Machine currently set with (10) 1 3/8” 5 oz max fill pistons.(Up to a 10 oz max fill with proper pistons change parts). Hopper capable of temperatures up to 200 deg. F. and is equipped with temperature gauge. Pistons are pneumatically actuated for fill deposit. Additional feature includes a self contained heating system that maintains a constant temperature throughout jacket, piston block and fill nozzles. Unit was last filling a heated cheese product while mounted over a Multivac Thermo former. Filler is mounted on an adjustable steel base with rolling locking casters. OAD: 51”(L) x 54”(W) x 72”(H)
Get a Free Quote Call: 630-629-9900
FEMC Filler Paste Twin
- Manufacturer: FEMC
- Model Number:
- Frain Number: 5E2158
Twin piston, S/S, filler capable of speeds 10 to 60 cpm (depending on application), min/max fill rane of 3 oz – 16 oz, with an accuracy of +/- 0.1%. Unit has a 4 ft³ (30 gal) S/S bulk product hopper, (2) 3" ID x 4"L pistons, and a height adjustable column with hydraulic jack assist for a 41"H – 46"H discharge. Mounted on a common base frame with (4) legs and casters.
OAD: 80"L x 48"W x 72"H
Get a Free Quote Call: 630-629-9900
Raque Filler Paste Quad PF254 / BL60
- Manufacturer: Raque
- Model Number: PF254 / BL60
- Frain Number: 5H4981
Raque, Model PF25-4, automatic, stainless steel, 4 head piston filler with BL60 paddle agitated hopper. Rated from 10 to 60 cycles per minute with number of containers – depending on materials and application. Fill size range: 10oz to 178oz. Container size range: up to 1.5 gallon with proper change parts. Equipped with 43" long x 18" wide x 24" deep stainless steel product hopper with paddle agitator and top cover. (4) 6½" ID x 10" long stainless steel air assist pistons and (4) 2½" OD positive cut off nozzles. Control panel has A/B controller with touch screen HMI. Mounted on stainless steel (4) leg base frame.
OAD: 95"L x 36"W x 80"H
Get a Free Quote Call: 630-629-9900
Volumetric Technologies Filler Paste Single TABLE TOP
- Manufacturer: Volumetric Technologies
- Model Number: TABLE TOP
- Frain Number: R28432
Volumetric Technologies, semi-automatic, 316 stainless steel, single head, table top piston filler. Fill range: .03 oz to 16 oz. with proper change parts. Fill accuracy +/- .25 of 1% volume. Equipped with conical 5 gallon product hopper, 1½" ID piston (0.5 to 9.75 oz range), ½"ID positive cut off nozzle, adjustment with gauge, fill speed adjustment, toggle switch activation and foot pedal control.
OAD: 34"L x 15"W x 32"H
Get a Free Quote Call: 630-629-9900
MRM Elgin Filler Paste Over 4 Head VERSA
- Manufacturer: MRM Elgin
- Model Number: VERSA
- Frain Number: 5H1913
MRM Elgin Model Versa filler, automatic, stainless steel, 6-head, rotary time / pressure filler. Rated from 20 to 90 containers per minute – depending on materials, application and machine configuration. Container size range: 1" to 14" in height; 1" to 5½" in diameter. Equipped with a 132" long x 4½" wide stainless steel table top conveyor, starwheel infeed and discharge, (11/16)" OD nozzles set on 5¾" centers and a (1/8) hp positive displacement supply pump. Control panel with push button start / stop controls, variable speed dial and volume control dial. Mounted on a painted base.
OAD: 135"L x 40"W x 65"H
Get a Free Quote Call: 630-629-9900