See us at the PMCA Show in Lancaster, PA on 4/15
Home » Heat Exchanger » Page 3
Heat exchangers come in a wide range of sizes. They can be plate heat exchangers, tubular heat exchangers designed for heating and cooling viscous products. Compact and heavy-duty plate heat exchangers offer improved heat transfer, lower plate inventory requirements and a wide range of sizes. Scraped surface heat exchangers can be employed in continuous, closed processing: cooking, cooling, mixing, gelling, heating, slush freezing, crystallizing, plasticizing and aseptic processes.The Shell and Tube (u-tube) is one of the most common type of heat exchanger. It contains a number of parallel utubes inside a shell. Shell Tube heat exchangers are used when a process requires large amounts of fluid to be heated or cooled. Due to their design, shell tube heat exchangers offer a large heat transfer area and provide high heat transfer efficiency.
General Oil Equipment, 133 gallon, stainless steel holding loop. Equipped with 389¾ ft of 3" stainless steel tubing with 3½" OD / 3" ID Tri-clamp style inlet and outlets. Mounted on a stainless steel frame. For a continuous process, a volumetric length of pipe is used to hold a rate of flow for a specific amount of time. Used in the pasteurization process to retain heat before being cooled back down.
OAD: 260"L x 24"W x 82"H
APV, Model VEGA-028 R-16, stainless steel, plate and frame heat exchanger with approx 1200 total ft² heat transfer area with a flow rate of 50 to 250 gallons per minute – depending on materials and application. Equipped with (302) plates 48" in Length; 12" in Width; in (3) zones, (132) plates front zone. (132) middle zone and (38) back zone, with (9) 3" OD / 2½" ID Tri-clamp transfer ports with a maximum working pressure of 150 psi and a maximum operating temperature of 190° F depending on gasket material. Mounted on stainless steel base frame.
OAD: 105"L x 20"W x 115"H
Thermaline, Model T28CH, stainless steel, plate and frame heat exchanger with approx 495 total sq ft, heat transfer area and approx flow rates from 50 to 500 gallons per minute – depending on materials and application. Equipped with 165 plates 42" in Length; 16" in Width; with (1) zone with (4) 3½" OD / 3" ID bottom, front / back product and media transfer ports with a maximum working pressure of 100 psi and a maximum operating temperature of 225° F depending on gasket material.
OAD: 67"L x 30"W x 67"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.