Kettle Machines

Lee Kettle Double Motion 50CHD9MT

• Manufacturer: Lee
• Model Number: 50CHD9MT
• Frain Number: 5H2630

Lee, Model 50CHD9MT, 50 gallon, 316 stainless steel jacketed double motion kettle. Vessel Dimenstions: 30" diameter x 22" deep with a 10" straight wall. Equipped with tilt out mount scrape agitation powered by a 2 hp drive with a variable speed gearbox, 2"OD / 1½"ID Seated bevel style bottom discharge with ball valve and 20" ground clearance and tilting kettle discharge. Mounted on a 48" x 48" painted base with casters. Base includes a Sussman, Model MB-6, "hot shot" 6 Kw electric boiler.

MAWP: 100 psi @ 338°F
Nat’l Brd: 3360

Jacket Ports:
(2) ¾" NPT

OAD: 60"L x 60"W x 76"H

Groen Kettle Single Motion ERA-250

• Manufacturer: Groen
• Model Number: ERA-250
• Frain Number: 5H4121

Groen, Model ERA-250, 304 stainless steel 250 gallon jacketed kettle. Vessel Dimensions: 54" diameter x 35" deep with a 10" straight wall. Equipped with scrape surface agitator, 5½" wide fixed baffle and flip up covers. Dish bottom with 2½" OD / 2"ID Tri-Clamp center bottom discharge with 13" ground clearance. Mounted on (4) tubular leg frame.

Top Access:
(1) 2½" OD / 2" ID Tri-Clamp
(1) 1¼" NPT

Jacket Fittings:
(2) 2" NPT
(1) 1½" NPT
(1) 1" NPT

MAWP: 100 PSI @ 338° F
MDMT: -20°F @ 100 PSI
Nat’l Brd: 140073

OAD: 60"L x 58"w x 82"H

Hubert Kettle Single Motion 350 GAL

• Manufacturer: Hubert
• Model Number: 350 GAL
• Frain Number: 5H3971

BH Hubbert 350 gallon, 304 stainless steel jacketed kettle. Vessel Dimensions: 54" diameter x 38" deep with 11" straight wall. Equipped with a bridge mounted scrape agitator. Spherical bottom with 3½" OD / 3"ID tri-clamp style center bottom discharge with 11" ground clearance. Mounted on (4) leg base frame.

Jacket Fittings:
(4) 2" NPT
(2) 1½" NPT
(1) 1" NPT

MAWP: 100 PSI @ 337° F
Nat’l Brd: 5567

OAD: 70" L x 52" W x 107" H

Lee Kettle Double Motion 30D9MT

• Manufacturer: Lee
• Model Number: 30D9MT
• Frain Number: R30653

Lee, 30 gallon, 304 stainless steel jacketed kettle. Vessel Dimensions: 20" diameter x 20" deep with a 10" straight wall. Equipped with a tilt out bridge mounted scrape agitator powered by a single 1 Hp drive, temperature probe, flush mount sensor and pneumatic ball valve. Kettle discharges into a Waukesha, Model 30, positive displacement pump powered by a 1½ hp drive with a 20.9:1 ratio gear box for a current flow rate of 4.9 GPM. Mounted on a base frame.

Top Access:
(1) 4½"OD / 4"ID Tri-Clamp
(3) 2½"OD / 2"ID Tri-Clamp

Side Access:
(1) 2½"OD / 2"ID Tri-Clamp

Jacket Fittings:
(2) ¾" NPT

MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15 PSI @ 250°F (Vessel)
MDMT: -20°F @ 15 PSI (Vessel)
Nat’l Brd: 9238

OAD: 76"L x 50"W x 80"H

Lee Kettle Double Motion 100D9MS

• Manufacturer: Lee
• Model Number: 100D9MS
• Frain Number: R30320

Lee, Model 100 D9MS, 316 stainless steel jacketed kettle. Vessel Dimensions: 36" ID x 30" Deep mixing bowl with a 12" straight wall. Equipped with bridge mounted, variable speed scrape surface agitator, flip top covers and (1) flush mount sensor. Dish bottom with 2½" OD / 2" ID tri-clamp style center bottom discharge with ball valve and 22" floor clearence. Mounted on (3) stainless steel tubular leg frame.

Jacket Fittings: (2) 1" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat’l Brd: 11781

OAD: 48"L x 38"W x 68"H

Lee Kettle Single Motion 300D

• Manufacturer: Lee
• Model Number: 300D
• Frain Number: 5H3932

Lee, Model 300D, 316 stainless steel jacketed kettle. Vessel Dimensions: 54" diameter x 36" deep with a 15" straight wall. Equipped with prop agitation, flip up cover with a 15" flip up manway. Spherical bottom with 3¼" NPT style center bottom discharge and 41" ground clearance. Mounted on (3) tubular leg frame.

Top Access:
(1) 3"OD / 2½"ID Tri-Clamp

Jacket Fittings:
(2) 2" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat’l Brd: 7880

OAD: 57"L x 55"W x 105"H

Lee Kettle Triple Motion 300D12T

• Manufacturer: Lee
• Model Number: 300D12T
• Frain Number: R30290

Lee, Model 300D12T, 300 gallon 316 stainless steel triple motion, jacketed kettle. Vessel Dimensions: 54" inside Diameter; 47" in Depth. Equipped with tilt out, bridge mounted variable speed agitation. (Double motion scrape / counter rotation agitator powered by a 20 Hp drive, high shear agitator powered by a 75 hp direct drive.), CIP spray ball supplied by a 2"OD / 1"ID tri-clamp fitting, (1) 2½" OD / 2"ID tri-clamp style discharge with ball valve and 15" ground clearance and (1) 2" OD / 1½"ID tri-clamp style discharge with ball valve and 18" ground clearance.

Top Access:
(2) 3¾"OD / 3"ID Tri-Clamp
(5) 2½"OD / 2"ID Tri-Clamp

Side Access:
(1) 2½"OD / 2"ID Tri-Clamp

Jacket Fittings:
(4) 1" NPT

National Board number: 8830
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15 PSI @ 250°F (vessel)
MDMT: -20°F @ 15 PSI (vessel)

*vessel rated for internal vacuum service*

OAD: 110"L x 64"W x 157"H

Lee Kettle Double Motion 200D9MSI

• Manufacturer: Lee
• Model Number: 200D9MSI
• Frain Number: R29911

Lee, Model 200D9MSI, 316 stainless steel 1/2 jacketed kettle. with amount of product per hour – depending on materials and application. Vessel Dimensions: 48" ID x 39" Deep mixing bowl. Equipped with bridge mounted scrape surface agitator and flip top covers. Dish bottom with 4½" OD / 4" ID tri-clamp style center bottom discharge with 21" floor clearence. Mounted on (4) stainless steel tubular leg frame.

Jacket Fittings:
(2) 2" NPT

MAWP: 90 PSI @ 332° F
MDMT: -20°F @ 90 PSI
Nat’l Brd: 7992

OAD: 68" L x 52" W x 97 H

Walker Kettle Double Motion 500 PZCR

• Manufacturer: Walker
• Model Number: 500 PZCR
• Frain Number: 5H4695

Complete stainless steel, melting and mixing system with amount of product per hour – depending on materials and application. Includes (1) Chester Jensen, 367 gallon, stainless steel cone bottom jacketed cooker / cooler with 74" ID x 21-1/2" straight wall x 19-1/2" cone bottom. Bridge mounted dual motion scrape surface agitation, counter rotating high speed tri-blade agitator and curved stationary baffle. (1) 2 Hp and (1) 3 Hp, motor drives with gear reducer and (2) 2" inlet ports with 2-piece flip-up covers and proximity sensors. Bottom dimpled jacket rated at MAWP 100psi @ 340°F and MDMT -20°F @ 100psi. with (2) bottom 2" npt jacket in / outlet ports. (1) Walker 500 gallon 304 stainless steel full jacketed cone bottom tank. 57"I.D. x 49-1/2" high staight wall, Bridge mounted dual motion scrape surface agitation (1) 2 Hp and (1) 3 Hp motor drives with gear reducer, (4) 3" tri-clamp inlet ports and 2-piece flip-up cover with proximity sensors. Full multi zone jacket rated at MAWP 100psi @ 350°F and MDMT -20°F @ 100psi, with 4-side and 2-bottom 1-1/2" jacket inlet / outlet ports and bottom mounted temperature probe (1) Fristam 10 Hp centrifugal pump with 2-1/2" x 2" in/outlet tri-clamp ports, (1) Rotan 5 Hp and (1) Rotan 1.5 Hp 3" flanged port pumps. (1) Bunting 3" stainless steel in line magnetic trap (1) Sani-Matic stainless steel streamline filter. 316L stainless steel hygienic jacketed piping as well as all associated valves and fittings. Mounted on 246" long x 62-1/2" wide x 7" high stainless steel base frame and 207" long x 132" wide x 42" high side railing, inspection platform with control panel.

Lee Kettle Double Motion 5CD9MT

• Manufacturer: Lee
• Model Number: 5CD9MT
• Frain Number: R30110

Lee, Model 5CD9MT, 5 gallon, 316 stainless steel jacketed double motion kettle. Vessel Dimensions: 16" diameter x 10" deep with a 3" straight wall. Equipped with tilt out (scrape & counter rotation) agitation, ½ hp variable speed drive and manual tilt discharge with 21" ground clearance. Mounted on a 40" x 40" painted base with casters.

MAWP: 40 psi @ 300°F
Nat’l Brd: 2693

Jacket Ports:
(2) ¾" NPT

OAD: 50"L x 45"W x 50"H

Lee Kettle Double Motion 50D9MT

• Manufacturer: Lee
• Model Number: 50D9MT
• Frain Number: R29180

Lee, 50 gallon, 304 stainless steel jacketed kettle. Vessel Dimensions: 32" diameter x 22" deep with a 10" straight wall. Equipped with a bridge mounted scrape agitator powered by a single 2 Hp drive, flush mount sensor, bottom feed port with backflow valve and 2½" OD / 2"ID tri-clamp style discharge with butterfly valve and 7" ground clearance. Mounted on (3) tubular leg frame.

Jacket Fittings:
(2) ¾" NPT

MAWP: 40 PSI @ 287° F
MDMT: -20°F @ 40 PSI

OAD: 57"L x 35"W x 54"H

Lee Kettle Double Motion 80EDA

• Manufacturer: Lee
• Model Number: 80EDA
• Frain Number: R29650

18000W WatcLee, Model 80EDA, platform mounted 80 gallon stainless steel batch mixing system. Kettle Dimensions: 36" diameter x 24" deep. Equipped with bridge mounted double motion scrape surface agitation and mounted on Weigh Tronix load cells. Kettle discharges to a Waukesha, Model 45, positive displacement pump with a jacketed head and 3¼"OD / 1¾"ID I-Line style fitting with 16" ground clearance. Heat transfer surfaces supplied by a self contained 18000w Watlow heating system with hot water tank and Waukesha, Model C, centrifugal pump. Control panel with AB PanelView 550 HMI and AB PLC. System mounted on heavy duty stainless steel push cart.

MAWP: 90 PSI @ 332°F
MDMT: -20°F @ 90 PSI

OAD: 105"L x 68"W x 90"W