Mill Machines

Used Mill Equipment

There are many different names that are used to describe particle size reduction: milling, grinding, granulating, comminuting, etc. Milling systems can size reduce wet or dry powders. Their are variable speed drives that permit low speed screening and high speed impacting with one milling system. A typical milling system consists of an inlet chamber with a rotor screen and an outlet. The particle size depends upon the speed of the rotor, rotor type, screen hole size and the feed rate of the product. High shear granulation turns powders into dense granules for tableting or coating. Powders are added to a mixing bowl. A large impeller spins the powders into a vortex. A chopper tool shears the granules and removes the air. The granulated product is dried in the mixing bowl or fluid bed dryer.
Contact Us

Related Categories

Mill Equipment In Stock

Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R34466

Fitzmill, Model DAS06, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 26" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat and (16) fixed knife/impact blades powered by 7½ Hp motor drive. Product discharge is 15½” long x 5½” wide with 36” floor clearance. Has start / stop and e-stop controls. Mounted on stainless steel (4) leg frame.

OAD: 50"L x 33"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R34467

Fitzmill, Model DAS06, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 26" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat and (16) fixed knife/impact blades powered by 5 Hp motor drive. Product discharge is 15½” long x 5½” wide with 36” floor clearance. Has start / stop and e-stop controls. Mounted on stainless steel (4) leg frame.

OAD: 50"L x 33"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R34468

Fitzmill, Model DAS06, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 26" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat and (16) fixed knife/impact blades powered by 7½ Hp motor drive. Product discharge is 15½” long x 5½” wide with 36” floor clearance. Has start / stop and e-stop controls. Mounted on stainless steel (4) leg frame.

OAD: 50"L x 33"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R34462

Fitzmill, Model DAS06, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 26" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat and (16) fixed knife/impact blades powered by 5 Hp motor drive. Product discharge is 15½” long x 5½” wide with 36” floor clearance. Has start / stop and e-stop controls. Mounted on stainless steel (4) leg frame.

OAD: 50"L x 33"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R34460

Fitzmill, Model DAS06, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 26" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat and (16) fixed knife/impact blades powered by 7½ Hp motor drive. Product discharge is 15½” long x 5½” wide with 36” floor clearance. Has start / stop and e-stop controls. Mounted on stainless steel (4) leg frame.

OAD: 50"L x 33"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R34461

Fitzmill, Model DAS06, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 26" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat and (16) fixed knife/impact blades powered by 5 Hp motor drive. Product discharge is 15½” long x 5½” wide with 36” floor clearance. Has start / stop and e-stop controls. Mounted on stainless steel (4) leg frame.

OAD: 50"L x 33"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: 5H7560

Fitzmill, Model DAS06, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 22" long x 22" wide x 17" deep hopper, 4" diameter feed auger powered by 1½ Hp drive with variable speed gearbox and (16) fixed knife/impact blades powered by 10 Hp motor drive and jacketed milling chamber. Product discharge is 10” long x 5½” wide with 40” floor clearance. Control panel with push button start / stop controls. Mounted on a stainless steel frame with casters.

OAD: 60"L x 56"W x 82"H

Get a Free Quote Call: 630-629-9900
Photo of Fryma Mill Colloid MZ

Fryma Mill Colloid MZ

Thumbnail of Fryma Mill Colloid MZ Thumbnail of Fryma Mill Colloid MZ Thumbnail of Fryma Mill Colloid MZ Thumbnail of Fryma Mill Colloid MZ Thumbnail of Fryma Mill Colloid MZ

Fryma Mill Colloid MZ

  • Manufacturer: Fryma
  • Model Number: MZ
  • Frain Number: 5H6392

Fryma stainless steel, toothed, colloid mill with production rates from 300 to 3000 Litres of product per hour – depending on materials, application and machine configuration. Equipped with 18" ID x 19" Deep stainless steel, connical product hopper with 6"rotor / stator and 3" ID and 2-1/2" OD sanitary side ports, base motor drive. Mounted on 26" x 18" stainless steel base with casters.

OAD: 18" L x 14" W x 52" H

Get a Free Quote Call: 630-629-9900
Photo of Fryma Mill Colloid MZ-110

Fryma Mill Colloid MZ-110

Thumbnail of Fryma Mill Colloid MZ-110 Thumbnail of Fryma Mill Colloid MZ-110 Thumbnail of Fryma Mill Colloid MZ-110 Thumbnail of Fryma Mill Colloid MZ-110 Thumbnail of Fryma Mill Colloid MZ-110

Fryma Mill Colloid MZ-110

  • Manufacturer: Fryma
  • Model Number: MZ-110
  • Frain Number: 5H6391

Fryma stainless steel, toothed, colloid mill with production rates from 300 to 3000 Litres of product per hour – depending on materials and application. Equipped with 17-1/2" ID x 19" Deep stainless steel, connical product hopper with 6" OD rotor / stator and 3" ID and 2-1/2" OD sanitary side ports, base motor drive. Mounted on 26" x 18" stainless steel base with casters.
Mill is capable of running in both batch operation with hopper or in continuous in-line processing system without the hopper. Used for homoginizing, dispersing, refining emulsifing liquid to highly vicous products such as mustard, creams, mayonnaise, peanut butter, omitments, toothpastes as well as household and chemical products.

OAD: 24" L x 19" W x 49" H

Get a Free Quote Call: 630-629-9900
Photo of Ross Mill Roller (Mill) TRM

Ross Mill Roller (Mill) TRM

Thumbnail of Ross Mill Roller (Mill) TRM Thumbnail of Ross Mill Roller (Mill) TRM Thumbnail of Ross Mill Roller (Mill) TRM Thumbnail of Ross Mill Roller (Mill) TRM Thumbnail of Ross Mill Roller (Mill) TRM

Ross Mill Roller (Mill) TRM

  • Manufacturer: Ross
  • Model Number: TRM
  • Frain Number: 5G9746

Ross, Model 4 x 8 TRM, 3-Roll mill with volumes of product per hour – depending on materials and application. Equipped with (3) 4" in diameter x 8" long rollers powered by 1 Hp motor drive, with hand crank gap adjustment, scraper blades and 8" long working roll area. All (3) rolls made of hardened steel. Roller cooling with ¼" NPT inlet port for cooling medium and ¾" NPT outlet. Control panel has push button start, stop and e-stop chain. Mounted on heavy duty base frame.

OAD: 32"L x 26"W x 56"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer D6A

Fitzmill Mill Hammer D6A

Thumbnail of Fitzmill Mill Hammer D6A Thumbnail of Fitzmill Mill Hammer D6A Thumbnail of Fitzmill Mill Hammer D6A Thumbnail of Fitzmill Mill Hammer D6A Thumbnail of Fitzmill Mill Hammer D6A

Fitzmill Mill Hammer D6A

  • Manufacturer: Fitzmill
  • Model Number: D6A
  • Frain Number: R33976

Fitzmill, Model D6A, compact, on-wall design, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. Equipped with 12" long x 12" wide x 12" deep stainless steel product feed hopper 3" OD stainless steel vari speed metering feed screw to enclosed process chamber with (16) fixed stainless steel knife / impact blades and 16"diameter product discharge port with 33" ground clearance. The in-wall and on-wall configurations of the VFS-D6A are designed to contain the drive motors in a separate room or technical area. This leaves only a few easily disassembled product contact parts in the process area.

OAD: 48"L x 45"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzpatrick Mill Hammer DAS06

Fitzpatrick Mill Hammer DAS06

Thumbnail of Fitzpatrick Mill Hammer DAS06 Thumbnail of Fitzpatrick Mill Hammer DAS06 Thumbnail of Fitzpatrick Mill Hammer DAS06 Thumbnail of Fitzpatrick Mill Hammer DAS06 Thumbnail of Fitzpatrick Mill Hammer DAS06

Fitzpatrick Mill Hammer DAS06

  • Manufacturer: Fitzpatrick
  • Model Number: DAS06
  • Frain Number: R34250

Fitzmill, Model DASO6, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 26" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat and (16) fixed knife / impact blades powered by 7½ Hp motor drive. Product discharge port is 15” long x 5¾” wide with 29” floor clearance. Mounted on (4) leg frame.

OAD: 41" L x 34" W x 64" H

Get a Free Quote Call: 630-629-9900
1 … 6 7 8 9 10 … 14