Used Grinder Equipment
6 Grinder machines IN-STOCK!

More Photos: 4

Rietz Model RE-10-K5427, stainless steel extructor, designed for grinding frozen, partially frozen or fully thawed 50 lb blocks of product from 1000 to 4000 lbs an hour - depending on materials and application Equipped with 17" long; 14" wide; 14" deep flip up bolt down feed chute to 17' long; 14" wide; 17" deep stainless steel, crevice free, product hopper with (6) 6" long x 3-1/2" wide x 1-1/2" thick hammer blades, on 2-1/2" OD shaft, (6) 4" high; 1" wide stationary anvils, no knives / no sharpening for low maintence. 10" ID rotary product reduction port, with swing open, bolt down cover, reduction screen (change part size per application) with 31" floor clearance, chain to sprocket motor drive, safety guarding, start / stop and e-stop push buttons and mounted on all stainless steel base frame with casters.

OAD: 60" L x 40" W x 84" H

More Photos: 2
Play Video

Heavy duty, meat grinder capable of processing up to 4000 lbs per hour - depending on materials and application. Equipped with a 43" long x 23" wide tilt feed pan with 7" high backside, and 5" high front side, and 9" Long x 7" Wide x 7 1/2" High feed hopper with 12" Long x 4 1/2" Wide grinding screw and has a 6" 0D, and 5" ID threaded product discharge with 21" floor clearence, 7.5 Hp motor drive and is mounted on (4) leg base frame.

OAD: 45" L x 24" W x 54" H

More Photos: 2

Mixer / grinder, approx capacities up to 68 lbs @ min or 4000 lb @ Hr - depending on product temperature, texture, and feed speed. S/S contact parts, with 24" L x 20" W x 27" D inner dimmesion mixing chamber approx 140 lb capacity, has a 5" ID side port, and inner dual 5-1/2" L x 1-3/4" W paddles and dual 8" L x 1" & 2" W mixing arms on 1-1/2" OD shaft, with 7" L x 5 -1/2" W bottom port to screw trough and 19" L x 5" OD auger screw, 7" OD threaded product discharge port and attached 5" ID product discharge valve with 20" floor clearance, and single motor drive with dual reducers for mixer and grinder, mounted on (4) leg height adjustable base with casters.

OAD: 44" L x 32" W x 55" H

More Photos: 2

Fitzmill Model 8 guiloriver. Equipped with a 10" diameter by 16" high inlet, two 6-1/2" diameter by 12" long rollers with fifty 3/8" cutting pins and 8" diameter conical discharge with 15" of floor clearance. Equipped with 3HP parallel shaft gearmotor 84 rpm output. Last used in food operation.

OAD: 60" L x 30" W x 48" H

More Photos: 2

Fitzmill Guilorivier extructor capable of reducing small solid round, and rectangle frozen products into 3/8" particles up to 60 lbs @ min, depending on product. Ideal for frozen fruit, dairy, and citrus products, has all S/S contact parts, 12" x 10" feed throat 14" dia S/S break drum with 1/2" H riving pins which break's the product down and a 17" x 15" product discharge with 17" floor clearance, 5 HP motor drive, and mounted on a painted steel frame.

OAD: 70"(L) x 44"(W) x 50"(H)

More Photos: 1

(7) roll coffee grinder capable of doing up to 1200 lb of product per hour. Equipped with (7) ridged horizontal grinding rollers 4" dia x 20" L one side has ridges going horiziontal, the other side vertrical, discharging to a ribbon / paddle mixer with mixing bowl dimensions of 42" L x 13" W x 15" D has a bolt down lift off cover and 2" dia shaft with a combination of ribbon and paddles. Has a 5" x 3" bottom discharge to screened separation section with 13" floor clearence. with a 7.5 Hp (2) chain motor drive.

OAD: 78" L x 28" W x 90" H