Labeler Machines

TRIpack Labeler Sleever HSA240 / WSN 300 3M

• Manufacturer: TRIpack
• Model Number: HSA240 / WSN 300 3M
• Frain Number: R32460

TRIpack Model HSA-240 / AMF WSN, stainless steel, shrink neck bander and sleever with conveyor and steam shrink tunnel system. Rated from 20 to 200 containers per minute – depending on materials and application.

TRIpack Model HSA-240 shrink sleever with Layflat sleeve size range of: 40mm (1.6") to 245mm (9.8"). Cut length range of: 30mm (1.2") to 250mm (10"). Product OD range of: 25mm (1") to 100mm (4") and capable of running most shrinkable films with proper change parts. Equipped with powered film assist assembly, zero tension web design, loading / unwind station with 19" maximum film OD and 288" long x 4¾" wide stainless steel delron container conveyor. Mandrel / bullet design film delivery system and multi-blade knife assembly, with material out sensor, film tensioner and low film indicator. Control panel has A/B PLC with HMI operator interface, interlocking safety guarding and e-stops.

AMF WSN 300 3M, (2) zone, (4) tier steam heat shrink tunnel with 5" wide x 12" high aperature x 118" long steam shrink chamber with remote electric steam boiler. Maximum operating temperature of 212° F and adjustable manifold for direct steam heat where needed with steam exhaust controlled by turn of a knob and steam pressure of 3 to 4 Kg/cm2 and 43 to 57 psi with cool water consumption of 200 litres or 80 gallons per hour and has stand alone steam generator. Both mounted on stainless steel frames with casters and leveling legs.

OAD: 288" L x 46" W x 98" H

Trine Labeler Glue Wrap 4500GS

• Manufacturer: Trine
• Model Number: 4500GS
• Frain Number: 5H7312

Trine, Model 4500GS / 105, stainless steel, roll fed, wrap around, hot melt glue labeler and shrink tunnel rated from 50 to 200 containers per minute – depending on materials, application and machine configuration. Container size range: 1.625" to 5" in diameter, capable of handling containers made of glass, PET, HDPE, metal, paper board composites may be accommodated for full-wrap and patch decoration. Label size range: 6" to 14.5" in Length x 1" to 8.25" in Width up to 8.5 in height. Equipped with 4½" wide x 148" long total stainless steel delrin belt conveyors through labeler, worm screw to star wheel in feed and discharge container indexing with dual label reels with registration, Nordson hot glue system with __" OD vacuum drum label applicator, 4½" wide x 170" long belt conveyor through shrink tunnel and has 5-1/2" wide x 7-1/2" high aperture with 86" long shrink chamber. Control panel has Allen Bradly PLC controller with swing arm controls and panel view with top / bottom zone heater on / off controllers, conveyor and ratio speed control dials with conveyor on / off / reset buttons. Mounted on heavy duty base frames with safety guarding and statis light bar. Applications include beverage, food, pharmaceutical, cosmetic, dairy, aerosol and nutritional product industries.

Aesus Labeling Systems Labeler P/S Front & Back PREMIER

• Manufacturer: Aesus Labeling Systems
• Model Number: PREMIER
• Frain Number: 5J0900

Aesus, Model Premier, Top and bottom, high speed, pressure sensitive carton labeler. Rated from 1.600" to 4.700" with 0.08" to 0.12" gap width range and up to 280 cartons per minute – depending on materials and application. Equipped with 124" long infeed conveyor and 206" long thru labeler carton conveyor with a combination of (6) Herma Model 400 wipe on label heads (4) on top and (2) on bottom that apply pressures sensitive labels to the product (size of labels per application) with a redundancy system that allows you to manually switch to second label head when principal label head is low or did not apply label and has 12" OD label reel on 3" OD core and 64" long discharge conveyor with 16" long dual side belt compression section and has operating temperatures of 32 Deg F to 176 Deg F with a maximum humidity rating of 35% to 85% free of condinsation and has IP66 type protection system with vision cameras, high speed rejection and confirmation. Control panel has A/B PLC controller with A/B swivel HMI touch screen controls. and start, stop, reset, e-stops buttons and statis light bars. Mounted on heavy duty frame with interlock safety door guarding.

OAD: 206" L x 64" W x 94" H Labeler
124" L x 17" W x 40" H Infeed Conveyor
90" L x 36" W x 80" H Discharge Conveyor

CME Ltd Labeler Glue Spot STAMPER

• Manufacturer: CME Ltd
• Model Number: STAMPER
• Frain Number: 5J0854

CME Ltd, Excise stamp applicator. Rated from 10 to 120 stamps per minute depending on materials application and machine configuration. Can handle standard excise stamp sizes with proper change parts. Carton size range 1" to 7½" in length; 1" to 4½" in width; ½" to 2" in depth. Equipped with a 80" long infeed belt overhead transfer belt with cleats set on 8" centers, 48" long belt through servo driven stamp applicator with hot melt glue applicator and vision system to track stamp usage with 60" long discharge belt. Control panel has touch screen HMI. Mounted on heavy duty frame.

OAD: 163"L x 92"W x 70"H

CME Ltd Labeler Glue Spot STAMPER

• Manufacturer: CME Ltd
• Model Number: STAMPER
• Frain Number: 5J0852

CME Ltd, Excise stamp applicator. Rated from 10 to 120 stamps per minute depending on materials application and machine configuration. Can handle standard excise stamp sizes with proper change parts. Carton size range 1" to 7½" in length; 1" to 4½" in width; ½" to 2" in depth. Equipped with a 80" long infeed belt overhead transfer belt with cleats set on 8" centers, 48" long belt through servo driven stamp applicator with hot melt glue applicator and vision system to track stamp usage with 60" long discharge belt. Control panel has touch screen HMI. Mounted on heavy duty frame.

OAD: 163"L x 92"W x 70"H

Label Aire Labeler P/S Spot 3115

• Manufacturer: Label Aire
• Model Number: 3115
• Frain Number: R36670

Label Aire, Model 3115TS-1500 7"x16" RH LL3L pressure sensitive, wipe on spot labeler. Rated from 600 to 1,500 linear inches per minute, with number of product – depending on materials and application. Equipped with swivel mounted bracket with accuracies of +/- 1/32", maximum 16" OD label roll with 3" ID cores and has stepper drive. Control panel with touch screen HMI. Mounted on hand crank height adjustable T-stand with casters.

OAD: 48"L x 35"W x 68"H

P E USA Inc Labeler Glue Wrap SPLENDID

• Manufacturer: P E USA Inc
• Model Number: SPLENDID
• Frain Number: R36340

P E, Model SPLENDID L4A, Automatic, inline, cold glue, labeling system to apply pre-printed cut and stack style labels to cylindrical containers for full or partial wrap applications with number of labels and containers per minute – depending on materials and application. Container size range: 1½" to 5" in Diameter x 4¼" to14¾" in Height. Label size range: 1¾" to 16½" in Length x 1" to 7" in Height. Equipped with 153" long x 4" wide container conveyor, with worm screw in feed, pre-cut sheet stock label magazine, horizontal stripe cold glue wheel applicator and 40" long x 7" high wrap station with (6) 1½ OD x 7" High compression rollers. Control panel has P.E.electronic controller with HMI and power on start / stop, safety guard, screw safety, reset, e-stop push button and glue pump controls. Mounted on base frame with stainless steel cladding and interlock safety guarding with (4) leg height adjustable legs.
Change parts required to accommodate different size ranges.

OAD: 96" L x 72" W x 69" H

Label Aire Labeler P/S Spot 3115

• Manufacturer: Label Aire
• Model Number: 3115
• Frain Number: R36671

Label Aire, Model 3115TS-1500 7"x16" RH LL3L pressure sensitive, wipe on spot labeler. Rated from 600 to 1,500 linear inches per minute, with number of product – depending on materials and application. Equipped with swivel mounted bracket with accuracies of +/- 1/32", maximum 16" OD label roll with 3" ID cores and has stepper drive. Control panel with touch screen HMI. Mounted on hand crank height adjustable T-stand with casters.

OAD: 48"L x 35"W x 68"H

Label Aire Labeler P/S Spot 3114

• Manufacturer: Label Aire
• Model Number: 3114
• Frain Number: R36672

Label Aire, Model 3114TS-1500 7"x16" RH 1-10"ST LL3L pressure sensitive, blow tamp spot labeler. Rated from 600 to 1,500 linear inches per minute, with number of product – depending on materials and application. Equipped with swivel mounted bracket and blow tamp label head with label size range: ¾" to 5" in Length; ¾" to 7" in Width, with accuracies of +/- 1/32", and has 1" to 10" adjustable stroke with maximum 16" OD label roll with 3" ID cores and has stepper drive. Control with touch screen HMI. Mounted on hand crank height adjustable T-stand with casters.

OAD: 48"L x 35"W x 68"H

Label Aire Labeler P/S Spot 3114

• Manufacturer: Label Aire
• Model Number: 3114
• Frain Number: R36673

Label Aire, Model 3114TS-1500 7"x16" RH 1-10"ST LL3L pressure sensitive, blow tamp spot labeler. Rated from 600 to 1,500 linear inches per minute, with number of product – depending on materials and application. Equipped with swivel mounted bracket and blow tamp label head with label size range: ¾" to 5" in Length; ¾" to 7" in Width, with accuracies of +/- 1/32", and has 1" to 10" adjustable stroke with maximum 16" OD label roll with 3" ID cores and has stepper drive. Control with touch screen HMI. Mounted on hand crank height adjustable T-stand with casters.

OAD: 48"L x 35"W x 68"H

Label Aire Labeler P/S Wrap TRUNNION

• Manufacturer: Label Aire
• Model Number: TRUNNION
• Frain Number: R35470

MPI Label Systems / Label Aire Model 3115NV, Automatic, pressure sensitive Trunnion Series labeler specifically designed to handle non-stable cylindrical containers or products (top heavy or rounded bottom) such as ampules, vials, lip balm and lipstick containers, crayons, pens and small batteries, etc and rated up to 1500" per minute with number of containers – depending on materials, application and machine configuration. Powder coated and anodized aluminum coated steel construction. Equipped with 8′ long x 3" wide Model RLC5500 horizontal product roller conveyor, with 3" long rollers spaced for 9/16" OD product with 3.5 OD overhead wrap roller section with hand crank vertical adjustment. Label-aire Model 3115NV wipe on label head with label size up to 7" label Width; and minimum label length of .5" with accuracy: + / – 1/32". Has label roll 16" OD on 3" OD core, with friction drive rewind. Photoelectric product and label sensor with automatic label setup. Control panel has A/B PLC controller with A/B HMI R3 didital display with standard metric and detailed readouts, storage of multiple label smd product setup switch with missing label detection, main power on / off switches vari speed AC drive, with start, stop push buttons. Mounted on height adjustable forkable frame with double locking casters and leveling legs.

OAD: 96" L x 55" W x 102" H

Trine Labeler Glue Wrap 4650

• Manufacturer: Trine
• Model Number: 4650
• Frain Number: R36892

Trine, Model 4650R, Stainless steel, roll fed, hot melt glue labeler designed to apply full or partial wrap labels to containers. Rated from 60 to 400 containers per minute – depending on materials, application and machine configuration. Container size range: 1.7" to 5" in diameter, Label size range: 6.5" to 16.5" in Length with 1" to 7" web width. Capable of running glass, plastic and metal, full or empty containers with proper change parts. Equipped with 23" OD film roll stand, worm screw to star wheel in feed, 6" wide thru machine plastic delron container belt conveyor, (6) station vacuum drum, peeler plate, label cutting and transfer systems and scrap rewind, hot melt glue unit and compression belt section. Control panel has swing arm controller with push button start / stop / jog, variable speed dial and on / off switch for glue / label feed and statis light bar. Mounted on heavy duty frame with flip-up safety door guarding.

OAD: 115"L x 64"W x 95"H (Labeler)
115"L x 34"W x 83"H (Roll Stand)