See us at the PMCA Show in Lancaster, PA on 4/15
Home » Kettle » Double Motion » Page 2
The Frain Group engineers can assist you with your double motion kettle needs no matter how big or small your kettle project Kettles with double motion agitation have agitators moving in two different directions for greater mixing action than a single motion kettle.
Heritage Equipment / BCast, 300 gallon capacity, 316L stainless steel, jacketed, double motion kettle. Vessel dimensions: 54" diameter x 46" deep with 16" straight wall. Equipped with lift up covers, 5 Hp and 3 Hp bridge mounted double motion scrape agitator, flush mounted sensor, CIP spray balls supplied by 2"OD / 1½" ID Tri-Clamp fittings and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 15" ground clearance. Mounted on (4) leg frame.
Jacket Ports:
-Side(1) 2¼" NPT (1) 1¼" NPT
-Bottom(1) 2¼" NPT – Bottom
Nat’l Brd: 2623
VesselMAWP: 75 PSI @ 320°FMDMT: -4°F @ 75 PSI
OAD: 64"L x 64"W x 98"H
Lee, Model 300D9MS 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 5 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.
Jacket Ports: (2) 1½" NPT
Nat’l Brd: 14823MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
OAD: 74"L x 59"W x 79"H
Nat’l Brd: 14822MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
Lee, Model 300D9MS, 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 3 Hp bridge mounted sweep agitator and 4½" OD / 4" ID Tri-Clamp style bottom discharge with 17" ground clearance.
Nat’l Brd: 9116MAWP: 125 PSI @ 353°FMDMT: -20°F @ 100 PSI
OAD: 71"L x 58"W x 77"H
Lee, Model 150D9MS 150 gallon capacity, 316 stainless steel, jacketed double motion kettle. Vessel dimensions: 42" diameter x 39" deep with 20" straight wall. Equipped with lift up covers, 3 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.
Nat’l Brd: 14717MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
OAD: 64"L x 48"W x 77"H
Lee, Model 300D9MS 300 gallon capacity, 316 stainless steel, jacketed double motion kettle. Rated to 150,000 cps. Vessel dimensions: 54" diameter x 40" deep with 20" straight wall. Equipped with lift up covers, 5 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.
Nat’l Brd: 14857MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
Nat’l Brd: 14855MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
Nat’l Brd: 14856MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
Nat’l Brd: 14854MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
Lee, Model 150D9MS 150 gallon capacity, 316 stainless steel, jacketed double motion kettle. Rated to 150,000 cps. Vessel dimensions: 42" diameter x 39" deep with 20" straight wall. Equipped with lift up covers, 3 Hp bridge mounted scrape agitator, flush mounted sensor and 3½" OD / 3" ID Tri-Clamp style bottom discharge with ball valve and 16" ground clearance. Mounted on (3) leg frame.
Nat’l Brd: 14852MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
Lee, Model 25D9MT, 25 gallon, 304 stainless steel jacketed kettle with amount of product per hour – depending on materials and application. Vessel Dimensions: 23" diameter x 20" deep with 10" straight wall. Equipped with tilt out bridge mounted scrape agitator powered by single ¾ Hp motor drive and 2½"OD / 2"ID Tri-Clamp discharge with 16" clearance to frame. Control panel with start, stop push buttons.
Jacket Fittings:(2) ¾" NPT
MAWP: 40 PSI @ 287° F Nat’l Brd: 3214
OAD: 60"L x 30"W x 68"H
Lee, Model 100D7T, 100 gallon, 316 stainless steel jacketed and insulated double motion kettle. Vessel Dimensions: 36" diameter x 30" deep with 15" straight wall. Equipped with tilt out bridge mounted scrape surface agitation powered by a 1 hp drive and prop agitation powered by a ¼ hp drive, fixed baffle, 2"OD / 1½"ID Tri-clamp bottom discharge with 15" ground clearance. Mounted on (3) stainless steel legs.
MAWP: 90 psi @ 332°FMDMT: -20°F @ 90 PSINational Board: 12231
Top Access Ports:(3) 2½"OD / 2"ID Tri-clamp
Jacket Ports:(2) 1" NPT(1) ¾" NPT
OAD: 62"L z 43"W x 75"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.