Stay up to date with new inventory & industry news
Home » Kettle » Double Motion » Page 4
The Frain Group engineers can assist you with your double motion kettle needs no matter how big or small your kettle project Kettles with double motion agitation have agitators moving in two different directions for greater mixing action than a single motion kettle.
Walker, 25 gallon capacity, 304 stainless steel jacketed vessel. Dimensions: 22" diameter x 20" deep with a 24" straight wall. Equipped with lift up covers, 3 Hp dual agitation scrape/prop, 4" adjustable baffle, thermowell and 2" OD / 1½" ID Tri-Clamp style bottom discharge with 18" ground clearance.
Jacket Ports: (2) 1½" NPT(2) 1" NPT
MAWP: 15 psi @ 250°F
OAD: 40"L x 35"W x 77"H
Lee, Model 50CHD9MT, 50 gallon, 316 stainless steel jacketed double motion kettle. Vessel Dimenstions: 30" diameter x 22" deep with a 10" straight wall. Equipped with tilt out mount scrape agitation powered by a 2 hp drive with a variable speed gearbox, 2"OD / 1½"ID Seated bevel style bottom discharge with ball valve and 20" ground clearance and tilting kettle discharge. Mounted on a 48" x 48" painted base with casters. Base includes a Sussman, Model MB-6, "hot shot" 6 Kw electric boiler.
MAWP: 100 psi @ 338°FNat’l Brd: 3360
Jacket Ports:(2) ¾" NPT
OAD: 60"L x 60"W x 76"H
Lee, 30 gallon, 304 stainless steel jacketed kettle. Vessel Dimensions: 20" diameter x 20" deep with a 10" straight wall. Equipped with a tilt out bridge mounted scrape agitator powered by a single 1 Hp drive, temperature probe, flush mount sensor and pneumatic ball valve. Kettle discharges into a Waukesha, Model 30, positive displacement pump powered by a 1½ hp drive with a 20.9:1 ratio gear box for a current flow rate of 4.9 GPM. Mounted on a base frame.
Top Access:(1) 4½"OD / 4"ID Tri-Clamp(3) 2½"OD / 2"ID Tri-Clamp
Side Access:(1) 2½"OD / 2"ID Tri-Clamp
Jacket Fittings:(2) ¾" NPT
MAWP: 90 PSI @ 332° F (jacket)MDMT: -20°F @ 90 PSI (jacket)MAWP: 15 PSI @ 250°F (Vessel)MDMT: -20°F @ 15 PSI (Vessel)Nat’l Brd: 9238
OAD: 76"L x 50"W x 80"H
Lee, Model 100 D9MS, 316 stainless steel jacketed kettle. Vessel Dimensions: 36" ID x 30" Deep mixing bowl with a 12" straight wall. Equipped with bridge mounted, variable speed scrape surface agitator, flip top covers and (1) flush mount sensor. Dish bottom with 2½" OD / 2" ID tri-clamp style center bottom discharge with ball valve and 22" floor clearence. Mounted on (3) stainless steel tubular leg frame.
Jacket Fittings: (2) 1" NPT
MAWP: 90 PSI @ 332° FMDMT: -20°F @ 90 PSINat’l Brd: 11781
OAD: 48"L x 38"W x 68"H
Lee, Model 200D9MSI, 316 stainless steel 1/2 jacketed kettle. with amount of product per hour – depending on materials and application. Vessel Dimensions: 48" ID x 39" Deep mixing bowl. Equipped with bridge mounted scrape surface agitator and flip top covers. Dish bottom with 4½" OD / 4" ID tri-clamp style center bottom discharge with 21" floor clearence. Mounted on (4) stainless steel tubular leg frame.
Jacket Fittings:(2) 2" NPT
MAWP: 90 PSI @ 332° FMDMT: -20°F @ 90 PSINat’l Brd: 7992
OAD: 68" L x 52" W x 97 H
Complete stainless steel, melting and mixing system with amount of product per hour – depending on materials and application. Includes (1) Chester Jensen, 367 gallon, stainless steel cone bottom jacketed cooker / cooler with 74" ID x 21-1/2" straight wall x 19-1/2" cone bottom. Bridge mounted dual motion scrape surface agitation, counter rotating high speed tri-blade agitator and curved stationary baffle. (1) 2 Hp and (1) 3 Hp, motor drives with gear reducer and (2) 2" inlet ports with 2-piece flip-up covers and proximity sensors. Bottom dimpled jacket rated at MAWP 100psi @ 340°F and MDMT -20°F @ 100psi. with (2) bottom 2" npt jacket in / outlet ports. (1) Walker 500 gallon 304 stainless steel full jacketed cone bottom tank. 57"I.D. x 49-1/2" high staight wall, Bridge mounted dual motion scrape surface agitation (1) 2 Hp and (1) 3 Hp motor drives with gear reducer, (4) 3" tri-clamp inlet ports and 2-piece flip-up cover with proximity sensors. Full multi zone jacket rated at MAWP 100psi @ 350°F and MDMT -20°F @ 100psi, with 4-side and 2-bottom 1-1/2" jacket inlet / outlet ports and bottom mounted temperature probe (1) Fristam 10 Hp centrifugal pump with 2-1/2" x 2" in/outlet tri-clamp ports, (1) Rotan 5 Hp and (1) Rotan 1.5 Hp 3" flanged port pumps. (1) Bunting 3" stainless steel in line magnetic trap (1) Sani-Matic stainless steel streamline filter. 316L stainless steel hygienic jacketed piping as well as all associated valves and fittings. Mounted on 246" long x 62-1/2" wide x 7" high stainless steel base frame and 207" long x 132" wide x 42" high side railing, inspection platform with control panel.
Lee, Model 5CD9MT, 5 gallon, 316 stainless steel jacketed double motion kettle. Vessel Dimensions: 16" diameter x 10" deep with a 3" straight wall. Equipped with tilt out (scrape & counter rotation) agitation, ½ hp variable speed drive and manual tilt discharge with 21" ground clearance. Mounted on a 40" x 40" painted base with casters.
MAWP: 40 psi @ 300°FNat’l Brd: 2693
OAD: 50"L x 45"W x 50"H
Lee, 50 gallon, 304 stainless steel jacketed kettle. Vessel Dimensions: 32" diameter x 22" deep with a 10" straight wall. Equipped with a bridge mounted scrape agitator powered by a single 2 Hp drive, flush mount sensor, bottom feed port with backflow valve and 2½" OD / 2"ID tri-clamp style discharge with butterfly valve and 7" ground clearance. Mounted on (3) tubular leg frame.
MAWP: 40 PSI @ 287° FMDMT: -20°F @ 40 PSI
OAD: 57"L x 35"W x 54"H
18000W WatcLee, Model 80EDA, platform mounted 80 gallon stainless steel batch mixing system. Kettle Dimensions: 36" diameter x 24" deep. Equipped with bridge mounted double motion scrape surface agitation and mounted on Weigh Tronix load cells. Kettle discharges to a Waukesha, Model 45, positive displacement pump with a jacketed head and 3¼"OD / 1¾"ID I-Line style fitting with 16" ground clearance. Heat transfer surfaces supplied by a self contained 18000w Watlow heating system with hot water tank and Waukesha, Model C, centrifugal pump. Control panel with AB PanelView 550 HMI and AB PLC. System mounted on heavy duty stainless steel push cart.
MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
OAD: 105"L x 68"W x 90"W
Lee, Model 300D9MT, 316 stainless steel jacketed kettle. Vessel Dimensions: 54" diameter x 42" deep with an 18" straight wall. Equipped with a flush mount sensor, tilt out bridge mounted scrape agitator powered by a 3 Hp drive with VFD and 2½" OD / 2"ID tri-clamp style discharge with ball valve at 15" ground clearance. Mounted on (3) tubular leg frame.
Jacket Fittings: (2) 1½" NPT
MAWP: 90 PSI @ 332° FMDMT: -20°F @ 90 PSINational Board: 13872
OAD: 78"L x 58"W x 80"H
Lee, Model 150D9MT, 316 stainless steel jacketed kettle. Vessel Dimensions: 42" diameter x 34" deep with a 15" straight wall. Equipped with a flush mount sensor, tilt out bridge mounted scrape agitator powered by a single 2 Hp drive with variable speed control and 2½" OD / 2"ID tri-clamp style discharge with ball valve and 15" ground clearance. Mounted on (3) tubular leg frame.
MAWP: 90 PSI @ 332° FMDMT: -20°F @ 90 PSINat’l Brd: 13878
OAD: 68"L x 48"W x 68"H
Lee, Model 100 NEM, 100 gallon capacity, 316 stainless steel, double motion (scrape & prop) kettle. Vessel dimensions: 36" diameter x 30" deep with a 14" straight wall. Equipped with lift off covers with safety shut-off, bridge mounted 3 HP scrape and 1 HP prop agitator, flush mounted sensor and 2½" OD / 2" ID Tri-Clamp style bottom discharge with ball valve and 15" ground clearance.
Jacket Ports: (4) 1" NPT
Nat’l Brd: 11162MAWP: 90 PSI @ 332°FMDMT: -20°F @ 90 PSI
OAD: 48"L x 50"W x 91"H (Kettle)
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.