See us at the PMCA Show in Lancaster, PA on 4/15
Home » Kettle » Page 4
Frain Industries carries hundreds of used hemispherical bottom kettles in many different sizes depending on your application. Frain stocks kettles ranging from 2.5 gallons to 2000 gallons in many different configurations including: agitator, steam kettles or water jacket, scrape surface, tilt discharge, and many others. Additionally kettles can be made of multiple grades of stainless steel (typically 304 or 316/316L) with different levels of corrosion resistance.
Types of agitation available include: single-motion, double-motion, triple-motion, high sheer, horizontal blenders, prop, anchor, and many others.
The Frain Industries engineering team can place you into a kettle solution for your application. If you are looking for a single kettle or an integrated solution with automated fill and discharge options Frain has the equipment for your needs.
Frain Industries carried used tanks from many OEM’s including APV, APV Crepaco, Cleveland, Coppola, Dover, Groen, Hamilton, Hubbert, JC Pardo, Lee, Savage, Walker, and many others.
Lee, Model 50U75, 50 gallon capacity, 316 stainless steel jacketed and vacuum process tank. Vessel dimensions: 30" diameter x 28" deep with a 16" straight wall and cone bottom. Equipped with a 2 Hp top mounted sweep agitator, 1 HP Prop agitator, 1½ hp high shear agitator and 2½" OD / 2" ID Tri-clamp style bottom discharge with pneumatic plug valve and 55" ground clearance. Mounted on (3) tube legs.
Top Ports:(1) 8½" OD / 7¾"ID Tri-Clamp(2) 4" OD / 3½" ID Tri-Clamp(6) 2" OD / 1½: ID Tri-Clamp
MAWP: 100 PSI @ 338°F (Jacket)MDMT: -20°F @ 150 PSI (Jacket)Nat’l Brd: 11178
Internal full vacuum rated
OAD: 48"L x 45"W x 90"H
Lee Model 50U7S, 316 stainless steel, 50 gallon, full jacketed, Internal vacuum rated, triple motion kettle with gallons of product per hour – depending on materials and application. Equipped with bolt down top cover with (1) center top mounted anchor style agitator and (1) off center top mounted turbine agitator and (1) off center top mounted prop agitator with full side and bottom jacket. Dish bottom has 6" OD sanitary center bottom discharge with 60" floor clearance. Mounted on (3) stainless steel legs.
Vessel Dimensions: 38" OD; 28" Deep
Jacket rated: MAWP 100psi @ 338°F; MDMT of -20°F @ 100psi.
Top Ports:(5) 2" OD Sanitary Ports(2) 3" OD Sanitary Ports(1) 8" OD Sanitary Manway
Bottom Port:(1) 6" OD Sanitary Discharge Port
Jacket Ports: (2) 1-1/2" OD Threaded Side Ports(2) 1-1/2" OD Threaded Bottom Ports
National Board: # 9798
OAD: 38" L x 38" W x 120" H
National Board: # 11177
Lee, Model 25D9MT, 25 gallon, 304 stainless steel jacketed kettle with amount of product per hour – depending on materials and application. Vessel Dimensions: 23" diameter x 20" deep with 10" straight wall. Equipped with tilt out bridge mounted scrape agitator powered by single ¾ Hp motor drive and 2½"OD / 2"ID Tri-Clamp discharge with 16" clearance to frame. Control panel with start, stop push buttons.
Jacket Fittings:(2) ¾" NPT
MAWP: 40 PSI @ 287° F Nat’l Brd: 3214
OAD: 60"L x 30"W x 68"H
Lee, Model 100D7T, 100 gallon, 316 stainless steel jacketed and insulated double motion kettle. Vessel Dimensions: 36" diameter x 30" deep with 15" straight wall. Equipped with tilt out bridge mounted scrape surface agitation powered by a 1 hp drive and prop agitation powered by a ¼ hp drive, fixed baffle, 2"OD / 1½"ID Tri-clamp bottom discharge with 15" ground clearance. Mounted on (3) stainless steel legs.
MAWP: 90 psi @ 332°FMDMT: -20°F @ 90 PSINational Board: 12231
Top Access Ports:(3) 2½"OD / 2"ID Tri-clamp
Jacket Ports:(2) 1" NPT(1) ¾" NPT
OAD: 62"L z 43"W x 75"H
Lee, Model 1000GALD12, 1000 gallon 316 stainless steel jacketed kettle. Vessel Dimensions: 72" ID x 72" deep. Equipped with stainless steel mezzanine, tilt out bridge mounted double motion scrape agitator powered by 30 Hp drive, high shear agitator powered by 60 Hp direct drive, 18" manway, flush mounted sensor and 3½" OD / 3"ID tri-clamp style discharge with ball valve and 36" ground clearance.
Jacket Fittings: 2" NPT
Nat’l Brd: 7577MAWP: 90 PSI @ 332° F (jacket)MDMT: -20°F @ 90 PSI (jacket)
MAWP: 15/FV PSI @ 250° F (vessel)MDMT: -20°F @ 15/FV PSI (vessel)
OAD: 118"L x 76"W x 202"H
Lee, Model 1000GALD12, 1000 gallon 316 stainless steel jacketed kettle. Vessel Dimensions: 72" ID x 72" deep. Equipped with a tilt out bridge mounted double motion scrape agitator powered by a 30 Hp drive, high shear agitator powered by a 60 hp direct drive, 18" manway, flush mounted sensor and 3½" OD / 3"ID tri-clamp style discharge with ball valve and 36" ground clearance.
400 gallon capacity, 304 stainless steel low pressure jacketed process tank. Vessel dimensions: 82" diameter x 32" deep with a 12" straight wall and cone bottom. Equipped with lift up covers, 2 Hp top mounted scrape agitator and 8" x 6" flanged bottom discharge with 14½" ground clearance.
Top Ports:(2) 3½"OD / 3"ID Tri-clamp
Jacket Ports: (2) 1½" NPT
OAD: 86"L x 84"W x 77"H
Lee 500 gallon, stainless steel, double motion, jacketed kettle. Equipped with variable speed, double motion (scrape surface & counter rotation) agitation, dual flip top covers and 3" OD center bottom discharge with flush-bottom ball valve and sanitary tri-clamp connection at 16" floor clearance. Contact parts are 316 stainless steel with #4 finish and non-contact parts are 304 stainless steel. Pounds of product per hour dependant on materials and application.
Vessel dimensions: 62" Diameter; 51" in DepthJacket MAWP: 90 psi @ 332°FJacket MDMT: -20°F @ 90 psiJacket in/outlets: Threaded, 2" OD / 1-1/2" IDViscosity Rating: up to 100,000 cps
OAD: 90" L x 70" W x 90" H
Feldmeier Model 150-44-TMIX, 150 gallon, jacketed double motion kettle. 316 Stainless steel contact materials and 304 stainless steel non-contact materials, Vessel dimensions: 44" ID; 39" in Depth. #4 Finish inside and outside with all welds ground flush, polished and buffed. Equipped with bridge mounted counter rotating 3 Hp side and bottom scrape surface agitator, 3 Hp secondary turbine impeller, (4) 3" OD top ports and CIP spray ball. 1.5" NPT jacket in / outlets. 3" Center bottom discharge with 16" floor clearance. Rated up to 100,000 Cps. Number of gallons of product per hour dependent on materials and application.
Jacket rating:MAWP of 150 psi @ 350 Deg FFVMDMT -20 Deg F @ 150 psi
NB #: 10737
OAD: 57" L x 54" W x 98" H
Jacket rating:MAWP of 150 psi @ 350 Deg FFVMDMT -20 Deg F @ 150 psi.
N/B #: 10736
N/B #: 10735.
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.