Kettle Machines

Lee Kettle Triple Motion 1000GALD12T

• Manufacturer: Lee
• Model Number: 1000GALD12T
• Frain Number: R33860

Lee, Model 1000GALD12, 1000 gallon 316 stainless steel jacketed kettle. Vessel Dimensions: 72" ID x 72" deep. Equipped with stainless steel mezzanine, tilt out bridge mounted double motion scrape agitator powered by 30 Hp drive, high shear agitator powered by 60 Hp direct drive, 18" manway, flush mounted sensor and 3½" OD / 3"ID tri-clamp style discharge with ball valve and 36" ground clearance.

Jacket Fittings: 2" NPT

Nat’l Brd: 7577
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)

MAWP: 15/FV PSI @ 250° F (vessel)
MDMT: -20°F @ 15/FV PSI (vessel)

OAD: 118"L x 76"W x 202"H

Lee Kettle Triple Motion 1000GALD12T

• Manufacturer: Lee
• Model Number: 1000GALD12T
• Frain Number: R33861

Lee, Model 1000GALD12, 1000 gallon 316 stainless steel jacketed kettle. Vessel Dimensions: 72" ID x 72" deep. Equipped with a tilt out bridge mounted double motion scrape agitator powered by a 30 Hp drive, high shear agitator powered by a 60 hp direct drive, 18" manway, flush mounted sensor and 3½" OD / 3"ID tri-clamp style discharge with ball valve and 36" ground clearance.

Jacket Fittings: 2" NPT

Nat’l Brd: 7577
MAWP: 90 PSI @ 332° F (jacket)
MDMT: -20°F @ 90 PSI (jacket)

MAWP: 15/FV PSI @ 250° F (vessel)
MDMT: -20°F @ 15/FV PSI (vessel)

OAD: 118"L x 76"W x 202"H

Kettle Single Motion 400 GAL

• Model Number: 400 GAL
• Frain Number: 5H7741

400 gallon capacity, 304 stainless steel low pressure jacketed process tank. Vessel dimensions: 82" diameter x 32" deep with a 12" straight wall and cone bottom. Equipped with lift up covers, 2 Hp top mounted scrape agitator and 8" x 6" flanged bottom discharge with 14½" ground clearance.

Top Ports:
(2) 3½"OD / 3"ID Tri-clamp

Jacket Ports:
(2) 1½" NPT

OAD: 86"L x 84"W x 77"H

Lee Kettle Double Motion 500D9MS

• Manufacturer: Lee
• Model Number: 500D9MS
• Frain Number: R31211

Lee 500 gallon, stainless steel, double motion, jacketed kettle. Equipped with variable speed, double motion (scrape surface & counter rotation) agitation, dual flip top covers and 3" OD center bottom discharge with flush-bottom ball valve and sanitary tri-clamp connection at 16" floor clearance. Contact parts are 316 stainless steel with #4 finish and non-contact parts are 304 stainless steel. Pounds of product per hour dependant on materials and application.

Vessel dimensions: 62" Diameter; 51" in Depth
Jacket MAWP: 90 psi @ 332°F
Jacket MDMT: -20°F @ 90 psi
Jacket in/outlets: Threaded, 2" OD / 1-1/2" ID
Viscosity Rating: up to 100,000 cps

OAD: 90" L x 70" W x 90" H

Feldmeier Kettle Double Motion 150DMK

• Manufacturer: Feldmeier
• Model Number: 150DMK
• Frain Number: R31842

Feldmeier Model 150-44-TMIX, 150 gallon, jacketed double motion kettle. 316 Stainless steel contact materials and 304 stainless steel non-contact materials, Vessel dimensions: 44" ID; 39" in Depth. #4 Finish inside and outside with all welds ground flush, polished and buffed. Equipped with bridge mounted counter rotating 3 Hp side and bottom scrape surface agitator, 3 Hp secondary turbine impeller, (4) 3" OD top ports and CIP spray ball. 1.5" NPT jacket in / outlets. 3" Center bottom discharge with 16" floor clearance. Rated up to 100,000 Cps. Number of gallons of product per hour dependent on materials and application.

Jacket rating:
MAWP of 150 psi @ 350 Deg F
FV
MDMT -20 Deg F @ 150 psi

NB #: 10737

OAD: 57" L x 54" W x 98" H

Feldmeier Kettle Double Motion 150DMK

• Manufacturer: Feldmeier
• Model Number: 150DMK
• Frain Number: R31841

Feldmeier Model 150-44-TMIX, 150 gallon, jacketed double motion kettle. 316 Stainless steel contact materials and 304 stainless steel non-contact materials, Vessel dimensions: 44" ID; 39" in Depth. #4 Finish inside and outside with all welds ground flush, polished and buffed. Equipped with bridge mounted counter rotating 3 Hp side and bottom scrape surface agitator, 3 Hp secondary turbine impeller, (4) 3" OD top ports and CIP spray ball. 1.5" NPT jacket in / outlets. 3" Center bottom discharge with 16" floor clearance. Rated up to 100,000 Cps. Number of gallons of product per hour dependent on materials and application.

Jacket rating:
MAWP of 150 psi @ 350 Deg F
FV
MDMT -20 Deg F @ 150 psi.

N/B #: 10736

OAD: 57" L x 54" W x 98" H

Feldmeier Kettle Double Motion 150DMK

• Manufacturer: Feldmeier
• Model Number: 150DMK
• Frain Number: R31840

Feldmeier Model 150-44-TMIX, 150 gallon, jacketed double motion kettle. 316 Stainless steel contact materials and 304 stainless steel non-contact materials, Vessel dimensions: 44" ID; 39" in Depth. #4 Finish inside and outside with all welds ground flush, polished and buffed. Equipped with bridge mounted counter rotating 3 Hp side and bottom scrape surface agitator, 3 Hp secondary turbine impeller, (4) 3" OD top ports and CIP spray ball. 1.5" NPT jacket in / outlets. 3" Center bottom discharge with 16" floor clearance. Rated up to 100,000 Cps. Number of gallons of product per hour dependent on materials and application.

Jacket rating:
MAWP of 150 psi @ 350 Deg F
FV
MDMT -20 Deg F @ 150 psi

N/B #: 10735.

OAD: 57" L x 54" W x 98" H

Lee Kettle Double Motion 500D9MS

• Manufacturer: Lee
• Model Number: 500D9MS
• Frain Number: R31210

Lee 500 gallon, stainless steel, double motion, jacketed kettle. Equipped with variable speed, double motion (scrape surface & counter rotation) agitation, dual flip top covers and 3" OD center bottom discharge with flush-bottom ball valve and sanitary tri-clamp connection at 16" floor clearance. Contact parts are 316 stainless steel with #4 finish and non-contact parts are 304 stainless steel. Pounds of product per hour dependant on materials and application.

Vessel dimensions: 62" Diameter; 51" in Depth
Jacket MAWP: 90 psi @ 332°F
Jacket MDMT: -20°F @ 90 psi
Jacket in/outlets: Threaded, 2" OD / 1-1/2" ID
Viscosity Rating: up to 100,000 cps

OAD: 90" L x 70" W x 90" H

Heritage Equipment Company Kettle Double Motion BCCOOKCOOL200

• Manufacturer: Heritage Equipment Company
• Model Number: BCCOOKCOOL200
• Frain Number: R31850

Heritage Equipment, B Cast, 200 gallon capacity, 316 stainless steel jacketed dual purpose cooker, cooler. Vessel dimensions: 72" diameter x 34" deep with 17" straight wall and cone bottom. Equipped with lift up covers, 5.4 Hp bridge mounted scrape and 3 Hp prop agitator, 3½" OD / 3" ID Tri-clamp style bottom discharge with flow valve and 16" ground clearance. Mounted on (4) tube legs.

Top Ports:
(2) 3½"OD / 3"ID Tri-Clamp
(4) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp

Jacket Ports:
(2) 2" NPT

MAWP: 75 PSI @ 320°F
MDMT: -4°F @ 75 PSI
Nat’l Brd: 2196

OAD: 80"L x 76"W x 96"H

Lee Kettle Double Motion 500D9MT

• Manufacturer: Lee
• Model Number: 500D9MT
• Frain Number: R30780

Lee Model 500D9MT, 500 gallon, 316 stainless steel interior, 304 stainless steel external, double motion, scrape surface, 1/2 jacketed kettle with pounds of product per hour – depending on materials and application. Vessel dimensions: 61" ID x 51" in Depth. Equipped with bridge mounted scrape surface tilt out agitation with dual flip top covers. 1/2 jacket, with MAWP of 90 psi @ 322 Deg F and MDMT of -20 Deg F @ 90 psi with (2) 2" OD 1-1/2" ID side and bottom threaded jacket in / outlet ports. 3" OD center bottom discharge has flush-bottom ball valve and 16" floor clearence. Mounted on (3) stainless steel legs

OAD: 96" L x 70" W x 92" H

Lee Kettle Double Motion 500D9MT

• Manufacturer: Lee
• Model Number: 500D9MT
• Frain Number: R30781

Lee Model 500D9MT, 500 gallon, 316 stainless steel interior, 304 stainless steel external, double motion, scrape surface, jacketed kettle. Vessel dimensions: 61" ID; 51" in Depth. Equipped with bridge mounted, variable speed, scrape surface tilt out agitation with dual flip top covers. with (2) 2" OD 1-1/2" ID side and bottom threaded jacket in / outlet ports, 3" OD center bottom discharge with flush-bottom ball valve at 16" floor clearance. Mounted on (3) stainless steel legs. Pounds of product per hour dependent on materials and application.

MAWP: 90 psi @ 322°F
MDMT:-20°F @ 90 psi

OAD: 96" L x 70" W x 92" H

Groen Kettle Electric EE100

• Manufacturer: Groen
• Model Number: EE100
• Frain Number: R30760

Groen, Model EE-100, 316 stainless steel, 100 gallon self contained electric, steam jacketed kettle. with gallons of product per hour – depending on materials and application. Equipped with one piece hinged flip top cover, full steam jacket MAWP rated to 30 psi @ 300 Deg F. and MDMT rated to -20 Deg F @ 30 psi, (2) 1" OD threaded jacket in / outlets with pressure relief valve. Interior slant bottom with 2"OD / 1½"ID NPT to Tri-Clamp side bottom discharge with 17" floor clearence Control panel has thermostat heat controller and pressure gauge. Mounted (3) height adjustable legs.

OAD: 48"L x 48"W x 56"H