Mixer Powder Machines
Used Mixer Powder Equipment
Commercial and industrial powder mixer equipment and machines encompass a broad range of equipment designed to mix and blend dry:
- powders with powders
- powders with liquids
- mix liquids with liquids
- mix solids with liquids
- mixing applications including multiple components.
Powder Mixer equipment and machines are designed to fit their specific mixing and blending application whether it be powder with powder, or liquid with powder, though different types of mixing and mixing processes can be used to mix the same two components together.
The proper powder mixer for an application requires knowledge of the different substances that are to be mixed together as well as their mixing properties. To determine the proper mixer for the application, the desired outcome or end product for the mixing application needs to be known.
Commercial and industrial mixers are mostly batch but some mixing applications, such as powder to liquid, can be continuous. Batch mixers take a certain amount (batch) of product and process it for a certain amount of time.
Once the product is processed, the batch is removed from the mixer and another batch can be placed in the mixer. Continuous mixers move the product through the mixer so that a continuous stream of mixed product is being discharged.
See also: Liquid Mixers
Related Categories
Mixer Powder Equipment In Stock
Morcos Mixer Powder Ribbon S. S. RM600
- Manufacturer: Morcos
- Model Number: RM600
- Frain Number: R32170
Morcos Machinery Model RM600, stainless steel, double ribbon mixer with pounds of product per hour – depending on materials and application. 304L stainless steel construction. Has Maximum bowl capacity of 600 Litres, (21.18 ft³) with minimum mixing capacity of 268 litres (9.464 ft³) and maximum mixing capacity of 500 litres (17.657 ft³). Mixing chamber dimensions: 60" in Length; 24" in Width; 30" in Depth. Equipped with flip up / clamp down cover, with micro-switch safety switch and safety grate with seals for powdered products and 6" OD top product port. (2) levels of spirals, (1) internal anticlockwise and (1) external clockwise has 1¾" wide x (1/8)" thick (outer) and 1¾" wide x (1/8)" thick (inner) stainless steel ribbons powered by 7.3 Hp motor drive. 8" OD center bottom pneumatic discharge gate with 24" ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.
Granule product with crystal size ranging from 450 microns (17.71 mil.) till 650 microns (25.59 mil.).
OAD: 92" L x 30" W x 64" H
Get a Free Quote Call: 630-629-9900
Forberg / Skala Group Mixer Powder Paddle S.S. FZM.7
- Manufacturer: Forberg
- Model Number: FZM.7
- Frain Number: 5H7011
Forberg, Model FZM.7, 304 stainless steel, paddle mixer. Mixing trough dimensions: 16" in Length; 18" in Width; 12" in Depth. Equipped with clamp down flip up cover, (2) sets of (14) angled paddles set on 2" diameter shafts powered by a 1½ hp drive and (2) 3" x 13" discharge ports with 16" ground clearance. Mounted on stainless steel base frame with casters.
OAD: 43"L x 40"W x 38"H
Get a Free Quote Call: 630-629-9900
Blentech Corp Mixer Powder Ribbon S. S. SH-180A
- Manufacturer: Blentech
- Model Number: SH-180A
- Frain Number: R32122
Blentech, Model SH-180A, 100 ft³, 304 stainless steel, ribbon mixer with pounds of product per hour – depending on materials and application. Chamber dimmensions of 155" in Length x 65" in Width x 46" in Depth with flip top covers, 6½" OD center shaft with 3" wide x ¼" thick has single ribbon with 40" OD spokes. 4½" OD / 4" ID Tri-Clamp style center bottom discharge with 8" floor clearence. Mounted on (4) leg frame.
OAD: 192"L x 78"W x 65"H
Get a Free Quote Call: 630-629-9900
Mixer Powder Ribbon S. S. 36 FT³
- Model Number: 36 FT³
- Frain Number: R32491
Stainless steel, 44 ft³ total, (36 ft³ workable) double ribbon mixer with pounds of product per hour – depending on materials and application. 78" long x 30" wide x 36" deep inner mixing chamber dimensions. Equipped with (2) 17" OD product ports with covers, 4½" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 2" wide x (1/8)" thick (inner) stainless steel ribbons. 6" OD center bottom discharge with 22" ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.
OAD: 135"L x 45"W x 75"H
Get a Free Quote Call: 630-629-9900
Ross Mixer Powder Ribbon S. S. RB42B18
- Manufacturer: Ross
- Model Number: RB42B18
- Frain Number: R32420
Ross, model RB42B-18, 18 ft³ workable, double ribbon mixer with 304 stainless steel contact parts and pounds of product per hour – depending on materials and application. Inner mixing chamber dimensions: 60" in Length; 24" in Width; 28" in Depth. Equipped with lift up covers, 2" OD mixing shaft with 1" wide x (3/8)" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons powered by 5.4 Hp motor drive with variable speed control. 4" OD center bottom manual discharge with 36" ground clearence.
OAD: 92"L x 36"W x 86"H
Get a Free Quote Call: 630-629-9900
Rietz Mixer Powder Ribbon S. S. RS28K5406
- Manufacturer: Rietz
- Model Number: RS28K5406
- Frain Number: 5H6552
Rietz, Model RS-28-K5406, 304 stainless steel dual trough ribbon blender with pounds of product per hour – depending on materials and application. Working Capacity: 60 ft³. Dual trough dimensions: 72" in Length; 56" in Width; 36" in Depth. Equipped with (3) lift up top safety grates, (6) steam injection ports, 2½" wide x (3/8)" thick stainless steel ribbons and has dual pneumatic discharge gates with 42" ground clearance. Powered by (2) 15 Hp chain to sprocket motor drives with safety guarding. Mounted on (4) leg base frame.
OAD: 102"L x 75"W x 85"H
Get a Free Quote Call: 630-629-9900
Mueller Mixer Powder Ribbon S. S. 50FT³
- Manufacturer: Mueller
- Model Number: 50FT³
- Frain Number: R31775
Mueller, 50 ft³, double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 58" in Length; 41" in Width; 45" in Depth. Equipped with dual flip up cover and lift out safety grate, 3" OD mixing shaft with 1½" wide x (5/8)" thick (outer) and 2½" wide x (3/8)" thick (inner) stainless steel ribbons and (2) CIP spray balls. 4¾"OD / 3¾" ID Tri-Clamp discharge with 27" ground clearence. Mounted on (4) leg frame.
OAD: 96"L x 55"W x 80"H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 2 FT³
- Manufacturer: Patterson Kelley
- Model Number: 2 FT³
- Frain Number: R31980
Patterson Kelly, 2 ft³, 316 stainless steel, twin shell mixer. Rated to 60 lbs per ft³ with Ibs of product per hour – depending on materials and application. Equipped with (2) 12" ID product ports with bolt down covers, (2) 23" long side V-Walls and (2) 7" long inner V-Walls, shell powered by a 1 Hp drive, intensifier bar capable (not included with right now) and would be powered by a 2 hp drive and has 6"ID butterly valve discharge with 36" ground clearance. Requires 80" ceiling clearance with 22" swing radius / 44" swing diameter. Has push button start / stop controls and digital timers. Mounted on (4) stainless steel frame with casters and safety guarding.
OAD: 64"L x 45"W x 72"H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 3 FT³
- Manufacturer: Patterson Kelley
- Model Number: 3 FT³
- Frain Number: R31831
Patterson Kelly, Model 3 ft³, Cross Flow, 304 stainless steel twin shell mixer. Rated up to 140 lbs per ft³ – depending on materials and application. Equipped with (2) 16" ID product ports, (1) 32" / (1) 27" long side V-Walls and (1) 13" / (1) 8" long inner V-Walls, 6"ID discharge with 41" ground clearance, and shell powered by a 1½ Hp motor drive. Requires 90" ceiling clearance with a 23" swing radius / 46" swing diameter. start / e-stop / reset push buttons, hand / jog / time control switch and digital blend timer controller. Unit mounted on painted base frame with casters.
OAD: 90"L x 60"W x 85"H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Double Cone 60 FT³
- Manufacturer: Patterson Kelley
- Model Number: 60 FT³
- Frain Number: 5H5301
Patterson Kelly, 60 ft³, 304 stainless steel, double cone mixer. Rated to 56 lbs per ft³ with number of Ibs per hour – depending on materials, application and machine configuration. Equipped with (1) 18" ID product port with clamp down cover, 72" long x 72" diameter shell powered by 7½ Hp motor drive and 10" ID butterfly valve discharge with 35" floor clearance. Requires 150" ceiling clearance with 50" swing radius / 100" swing diameter.
OAD: 131"L x 72"W x 130"H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 5FT³
- Manufacturer: Patterson Kelley
- Model Number: 5FT³
- Frain Number: R31940
Patterson Kelly, 5 ft³, 316 stainless steel, twin shell mixer. Rated to 215 lbs/ft³ with pounds of product per hour – depending on materials and application. Equipped with (2) 18" ID product ports with bolt down covers, (2) 34" long side V-Walls and (2) 10" long inner V-Walls, 6" ID butterly valve discharge with 51" ground clearance, shell powered by 7½ Hp drive. Requires 110" ceiling clearance with 28" swing radius / 56" swing diameter. Mounted on painted (4) leg frame with cage style safety guarding.
OAD: 96"L x 80"W x 98"H
Get a Free Quote Call: 630-629-9900
Gemco Mixer Powder Twin Shell 10 FT³
- Manufacturer: Gemco
- Model Number: 10 FT³
- Frain Number: 5H5961
Gemco, 10 ft³, 304 stainless steel, twin shell mixer. Equipped with (2) 18" ID product ports with bolt down covers, (2) 38" long side V-Walls, (2) 18" long inner V-Walls. 6"ID valve discharge with 33" ground clearance. Shell powered by 1½ Hp drive. Requires 102" ceiling clearance with 35" swing radius / 70" swing diameter.
OAD: 90"L x 45"W x 90"L
Get a Free Quote Call: 630-629-9900