Mixer Powder Machines

Patterson Kelley Mixer Powder Twin Shell 10 FT³

• Manufacturer: Patterson Kelley
• Model Number: 10 FT³
• Frain Number: 5H5960

Patterson Kelly, 10 ft³, 304 stainless steel, twin shell mixer. Equipped with (2) 18" ID product ports with bolt down covers, (2) 38" long side V-Walls, (2) 18" long inner V-Walls. 8"ID butterly valve discharge with 42" ground clearance. Shell powered by 2 Hp drive. Requires 106" ceiling clearance with 32" swing radius / 64" swing diameter.

OAD: 90"L x 42"W x 98"H

Paul O Abbe Mixer Powder Double Cone 15 FT³

• Manufacturer: Paul O Abbe
• Model Number: 15 FT³
• Frain Number: 5H5300

Paul O Abbe, 20 ft³ total capacity (15 ft³ working capacity), 316 stainless steel, double cone mixer. Equipped with (1) 14" ID product port with clamp down cover, 45" long x 42" diameter shell powered by 5 Hp motor drive, pin bar and 8" ID butterfly valve discharge. Requires 80" ceiling clearance with 30" swing radius / 60" swing diameter. Mounted on heavy duty base frame.

OAD: 110"L x 45"W x 70"H

Patterson Processing Mixer Powder Double Cone 2-1/2 CU FT VACUUM

• Manufacturer: Patterson Processing
• Model Number: 2-1/2 CU FT VACUUM
• Frain Number: R30060

Patterson Processs, Model Conaform 2½ ft³, double cone vacuum dryer. 316 Stainless steel contact parts. Equipped with (1) 8" ID product port with bolt down cover, intensifier, 24" long x 22" diameter shell powered by 1Hp motor drive and 6" ID manual gate discharge. Requires 70" ceiling clearance with 17" swing radius / 34" swing diameter. Mounted on base frame. with pounds per ft³ and pounds per hour – depending on materials, application and machine configuration.

OAD: 70" L x 33" W x 55" H

Full Vacuum @ 300°F
Jacket: 75 PSI @ 300°F
MDMT: 75°F @ 75 PSI
Dryer Speed: 26 rpm
Conagrator Speed: 175 rpm
UL Rated
National Board # 52

Gemco Mixer Powder Double Cone 3 CU FT

• Manufacturer: Gemco
• Model Number: 3 CU FT
• Frain Number: 5H5341

Gemco Model 3 cubic foot working capacity, 304 stainless steel, porta hopper double cone tumble blender with spray bar and pounds of product per hour – depending on materials and application. Cone dimmensions: 40” in Height x 29-1/2" in Diameter with 3-1/2" discharge. Equipped with a pressurized tank 33-1/2" high x 18" OD x 36" floor clearance with 30mm in feed, 73mm discharge (connected to 27" pipe), 43mm side tank discharge, has 3 legs mounted on mild steel base. Hoppers are equipped with Gemco’s dust-tite spherical solids valves of economical butterfly. Mounted on base frame with casters and 3" floor clearance. D/3 design provides greater particle mobility for more efficient blends and easy cleaning.

OAD: 96" L x 64" W x 72" H

Patterson Kelley Mixer Powder Twin Shell CROSS FLOW

• Manufacturer: Patterson Kelley
• Model Number: CROSS FLOW
• Frain Number: R30089

Patterson Kelly Model 3 ft³, Cross Flow, 316 stainless steel twin shell mixer rated up to 290 lbs per ft³ – depending on materials and application. Equipped with (2) 15" ID product ports with quick release pin covers, (1) 25" / (1) 30" long side V-Walls and (1) 7" / (1) 11" long inner V-Walls, 6"ID butterly valve discharge with 33" ground clearance and powered by a 1 HP drive. Requires 80" ceiling clearance with a 23" swing radius / 46" swing diameter. Start / e-stop / reset push buttons, hand / jog / time control switch and digital blend timer controller. Unit mounted on painted base frame with lexan guarding and casters.

OAD: 57"L x 63"W x 76"H

Mixer Powder Ribbon S. S. 70 FT³

• Model Number: 70 FT³
• Frain Number: 5H4466

75 ft³ (70 ft³ working capacity), 304 stainless steel double ribbon mixer with pound of product per hour – depending on materials and application. Inner mixing chamber dimensions: 96" in Length; 38" in Width; 40" in Depth. Equipped with dual flip up covers, 12" OD charge port, 4½" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons. 9" OD center bottom discharge has manual slide valve with 43" floor clearence and 20 Hp motor drive. Mounted on (4) leg base frame.

OAD: 155" L x 46" W x 95" H

J H Day Mixer Powder Ribbon S. S. 5 CU FT

• Manufacturer: J H Day
• Model Number: 5 CU FT
• Frain Number: R21766

5 Cuft, 304 S/S, fully jacketed, single shaft double ribbon blender (37 gallon working capacity) and a 6 cubic foot (45 gallon) overall capacity. Has side liquid injection w/ 5 ports. Chamber measures 38"(W) x 17"(L) x 18"D). Jacket working pressure 80 psi @ 324 Deg. F. Shell working pressure is Atmosphere @ 324 Deg. F. Jacket has (2) 1" side inlet/outlet ports, (2) 1" bottom inlet/outlet ports, and (2) 3/16" side pressure relief ports. Equipped with dual hinged dust tight lid with a 7/8" center vent, sanitary stuffing box, continuous ribbon agitator with the inner spokes measuring 3/16”(thick) x 1 ”(high), outer spoke 3/8” (thick) x 1"(high), 3" dust tight slide gate center bottom discharge at 35” from the ground. Allen Bradley start/stop controls and safety switches. Mounted on casters. National Board # 1677
(OAD: 65"(L) x 24"(W) x 52"(H).

Patterson Kelley Mixer Powder Twin Shell 2 QT

• Manufacturer: Patterson Kelley
• Model Number: 2 QT
• Frain Number: R23381

Master blend yoke design, table top 2 quart twin shell mixer. All 316 stainless steel, V shaped blender has 11" long outside, and 3 1/2" inside dimmensions, (2) 6" diameter product ports with screw down covers. Push bottom start, stop and jog controls, plastic barrier guarding, is a all purpose blender for gentle dry blending, intensive dry blending of small lab batches. Mounted on a 48" x 30" stainless steel table.

OAD: 48" L x 30" W x 54" H

Patterson Kelley Mixer Powder Twin Shell 10FT³

• Manufacturer: Patterson Kelley
• Model Number: 10FT³
• Frain Number: 5H4012

Patterson Kelley, 10 ft³, 316 stainless steel, twin shell powder mixer with lbs of product per hour – depending on materials, application and machine configuration. Bulk density rating: 90 lbs/ft³. Equipped with (2) 20" ID product ports with bolt down covers, 40" long side V-Walls and 17" long inner V-Walls with 25" diameter chambers. 8" ID butterfly discharge with 41" floor clearance. Mounted on stainless steel "A" frame with a 32" swing radius / 64" swing diameter and requires 105" ceiling clearance.

OAD: 100" L x 60" W x 93" H

Patterson Mixer Powder Double Cone THOROBLENDER

• Manufacturer: Patterson
• Model Number: THOROBLENDER
• Frain Number: 5G9084

Patterson, Model Type B ThoroBlender, double cone, stainless steel, jacketed vacuum drying blender with pounds of product per hour – depending on materials, appllication and bulk density of the product. Overall Capacity: 40 ft³. Working Capacity: 25 ft³. Dimensions: 55" in Diameter; 55" in Height; 14" Straight Wall. Swing Diameter: 72". Equipped with a 17½" diameter bolt down loading hatch, 4 hp drive, 8" diameter pneumatic butterfly valve discharge with 45" of ground clearance, in chamber cartridge filter for a 7½ hp vacuum pump with a maximum flow of 71 CFM mounted on a frame with a secondary filter housing.

Jacket Ports: (2) ¾" NPT
Vacuum port: (1) 7½"OD / 4"ID flange

OAD: ___" L x ___" W x ___" H

Scott Mixer Powder Paddle S.S. TURBULIZER

• Manufacturer: Scott
• Model Number: TURBULIZER
• Frain Number: 5G0592

Scott Model Turbulizer, continuous, high shear paddle mixer. Equipped with 14" diameter x 42" long 304 stainless steel mixing chamber, 5" long x 2" wide tip mild steel paddles with 2-1/2" diameter shaft, 6-½" diameter top charging port, 6-3/8" wide x 7" deep rectangular flanged discharge, 54" high discharge height. Belt driven 30 hp drive. Mounted on a 75" long x 48" wide x 50" base. For processing dry powder mixing, hydrating hard to wet powders, slurry mixing, coating, sterilization, crystallization, agglomerating / granulating, homogenizing, de-lumping and more.

OAD: 79"L x 48"W x 75"H

Gemco Mixer Powder Double Cone 1 CU FT

• Manufacturer: Gemco
• Model Number: 1 CU FT
• Frain Number: R30809

Gemco Model 1 Cubic Foot, stainless steel, slant cone tumble mixer with pounds of product per hour – depending on materials and application. Mixing cone dimensions of: 16" in Length and 16" in width. Equipped with 11" ID in feed and discharge ports with clamp down covers and intensifier bar. Fill level: 1.0 cubic foot maximum / 0.33 cubic foot minimum, rated at 60 lbs bulk density with maximum working temperature of 40 Deg C or 104 Deg F. Control panel has timers for vessel and agitator with agitation fast, off, slow and agitation timer on, off controls has on, jog, off, switch with start, stop and e-stop push buttons. Mounted on heavy duty stainless steel base frame with safety guarding and locking casters.

OAD: 96" L x 55" W x 72" H