Mixer Powder Machines

Patterson Kelley Mixer Powder Twin Shell 3 CU FT

• Manufacturer: Patterson Kelley
• Model Number: 3 CU FT
• Frain Number: R30800

Patterson Kelly 3 cu ft, stainless steel twin shell mixer, rated to 60 lbs per cu ft, with pounds of product per hour – depending on materials and application. Equipped with (2) 12" ID product ports with bolt down covers, 30" long side V-Walls and 10" long inner V-Walls on 22" centers with 4" OD bottom discharge port with butterfly valve and 34" floor clearance. Control box has run / jog switch with start stop and e-stop push button controls. Mounted on (4) leg painted base frame with locking casters.

OAD: 60" L x 44" W x 72" H

Patterson Kelley Mixer Powder Twin Shell 5FT³

• Manufacturer: Patterson Kelley
• Model Number: 5FT³
• Frain Number: R30382

Patterson Kelly, 5 ft³, 316 stainless steel, twin shell mixer. Rated to 70 lbs/ft³ with Ibs of product per hour – depending on materials and application. Equipped with (2) 18" ID product ports with bolt down covers, (2) 34" long side V-Walls and (2) 10" long inner V-Walls, liquid solids bar and 6"ID butterly valve discharge with 36" ground clearance. Requires 96" ceiling clearance with 30" swing radius / 60" swing diameter. Has push button start / stop controls and digital timers. Mounted on (4) stainless steel frame with casters and safety guarding.

OAD: 94"L x 66"W x 96"H

Patterson Kelley Mixer Powder Twin Shell CROSS FLOW

• Manufacturer: Patterson Kelley
• Model Number: CROSS FLOW
• Frain Number: R30281

Patterson Kelly, Model 5 ft³, Cross Flow, 316 stainless steel twin shell mixer rated up to 106 lbs per ft³ with pounds of product per hour – depending on materials and application. Equipped with (2) 18" ID product ports with clamp down covers, (1) 30" / (1) 36" long side V-Walls and (1) 8" / (1) 13" long inner V-Walls, 6"ID butterly valve discharge with 28" ground clearance and powered by a 1 HP drive. Requires 92" ceiling clearance with a 32" swing radius / 64" swing diameter. Control panel with push button start / stop, hand / jog / time control switch and digital blend timer controller. Mounted on stainless steel base frame with lexan guarding and locking casters.

OAD: 66"L x 7"W x 80"H

Patterson Kelley Mixer Powder Twin Shell 1FT³

• Manufacturer: Patterson Kelley
• Model Number: 1FT³
• Frain Number: R30340

Patterson Kelly,1 ft³, 304 stainless steel, twin shell mixer. Rated to 60 lbs per ft³ and Ibs per hour – depending on materials and application. Equipped with (2) 11½" ID product ports with bolt down covers, (2) 16" long side V-Walls and (2) 7" long inner V-Walls. 6"ID butterly valve discharge with 29" ground clearance, liquid solids bar with a ¾" NPT connection powered by a 2 HP drive and shell powered by ¾ Hp drive. Requires 65" ceiling clearance with 20" swing radius / 40" swing diameter. Has push button start / stop controls. Mounted on base frame with casters.

OAD: 60"L x 35"W x 56"H

Patterson Kelley Mixer Powder Twin Shell 40 CU FT

• Manufacturer: Patterson Kelley
• Model Number: 40 CU FT
• Frain Number: R30150

Patterson Kelly, Model 40 ft³, 304 stainless steel, twin shell mixer. Rated up to 65 lb/ft³ total. Equipped with (2) 18" ID product ports with bolt down covers, (2) 64" long side V-Walls and (2) 24" long inner V-Walls. 10" ID butterly valve discharge with 41" ground clearance. Requires 145" ceiling clearance with 50" swing radius / 100" swing diameter. Mounted on heavy duty base frame.

OAD: 132"L x 48"W x 130"H

Mepaco Mixer Powder Paddle S.S. 170

• Manufacturer: Mepaco
• Model Number: 170
• Frain Number: R29900

Mepaco, Model 170, 304 stainless steel dual trough vacuum paddle blender. Capacity: 150 ft³ (120 ft³ working). Dual trough dimensions: 102" in Length; 64" in Width; 44" in Depth each trough. Equipped with lift up top cover and safety grate, double overlapping paddles, dual pneumatic gate end discharges with 40" ground clearance. Powered by (2) 20 Hp motor drives. Control panel has A/B PanelView Plus 700 touchscreen HMI. Mounted on heavy duty frame.

OAD: 154"L x 88"W x 105"H

Aaron Equipment Mixer Powder Ribbon S. S. 25 FT³

• Manufacturer: Aaron
• Model Number: 25 FT³
• Frain Number: 5H4465

Aaron, 25 ft³ (23 ft³ working capacity), 304 stainless steel double ribbon mixer with pound of product per hour – depending on materials and application. Inner mixing chamber dimensions: 66" in Length; 26" in Width; 30" in Depth. Equipped 4" OD mixing shaft with ¾" wide x ¼" thick (outer) and 2" wide x ¼ thick (inner) stainless steel ribbons. 6" OD center bottom discharge with manual slide valve and 45" floor clearence. Mounted on (6) leg base frame.

OAD: 143" L x 32" W x 88" H

Mepaco Mixer Powder Ribbon S. S. 170

• Manufacturer: Mepaco
• Model Number: 170
• Frain Number: R30125

Mepaco, Model 170, 304 stainless steel, jacketed, dual trough ribbon blender, rated from 0 to150 pounds of product per batch and pounds per hour – depending on materials application and machine configuration. Capacity: 2½ ft³ total (2 ft³ working). Dual trough dimensions: 25" in Length; 22" in Width; 15" in Depth each trough. Equipped with lift up top cover and safety grate, dual pneumatic gate discharges with 30" ground clearance and powered by (2) 1 Hp motor drives with mechanical variable speed. Control panel has start / jog / stop and switches for mix / unload / reverse and open / close for both discharge doors. Mounted on heavy duty base frame with casters.

Top Ports:
(1) 1" NPT
(1) ¼" NPT

Jacket Ports:
(4) 1" NPT

MAWP: 100 psi @ 338°F
MDMT: -20°F @ 115 psi
Nat’l Brd: 10711

OAD: 46"L x 40"W x 51"H

Littleford Mixer Powder Plow M5

• Manufacturer: Littleford
• Model Number: M5
• Frain Number: R29200

Littleford, Model M-5, 0.20 ft³, stainless steel mixer. Chamber dimensions: 8" diameter x 7" long. Equipped with (4) plows on 1" diameter shaft powered by a 3 Hp motor, top mounted 5¼" long x 2¾" wide bolt down access door with vents and 1½" NPT bottom discharge with flow valve and 9" ground clearance. Control panel with touch pad display, E-stop and digital temperature display.

Jacket Ports:
(3) ¼" NPT

MAWP: 150 psi @ 450°F (Jacket)
FV @ 450°F (Chamber)
MDMT: 32°F @ 150 PSI (Jacket)
32°F @ FV

OAD: 38"L x 22"W x 32"H

Patterson Kelley Mixer Powder Double Cone 5 FT³

• Manufacturer: Patterson Kelley
• Model Number: 5 FT³
• Frain Number: 5H3650

Patterson Kelly, 5 ft³, stainless steel, double cone mixer. Rated to 106 lbs per ft³ and Ibs per hour – depending on materials, application and machine configuration. Equipped with (1) 14" ID product port with clamp down cover, 28" long x 30" diameter shell powered by 1 hp motor drive and 6" ID butterfly valve discharge. Requires 85" ceiling clearance with 20" swing radius / 40" swing diameter. Control panel, has start / e-stop and reset push buttons and run/jog control switch. Mounted on stainless steel base frame with casters and lexan guarding.

OAD: 70"L x 46"W x 80"H

Littleford Mixer Powder Plow FKM600D

• Manufacturer: Littleford
• Model Number: FKM600D
• Frain Number: 5H3160

Littleford, 600 Liter, 20 ft³ plow mixer. Chamber dimensions of: 36" OD / 32" ID; 48" Long. Equipped with 30" long x 26" wide x 16" deep top mounted product feed hopper with flip-up cover and safety grid, one 11" OD / 6" ID flanged top port, two18" x 14" side access doors with safety shut-offs. Interior has (6) 10-1/2" long x 9-1/2" wide mixing plows with 2-1/2" wide x 1" thick spokes set on 4" OD shaft powered by 20 Hp main belt to motor drive with safety guarding. Additionally features two high speed side mounted choppers with 5 Hp motor drives. Center bottom 20" OD flanged discharge port and 12" x 12" swing door discharge valve with 24" ground clearance. Rates dependent on materials, application and machine configuration. Stainless steel contact parts.

OAD: 84" L x 60" W x 70" H

Scott Equipment Co Mixer Powder Ribbon S. S. TB1610

• Manufacturer: Scott Equipment Co
• Model Number: TB1610
• Frain Number: 5H3331

Scott Equipment Model TB1610, stainless steel, continuous ribbon / paddle mixer with pounds of product per hour – depending on materials, application and machine configuration. Chamber dimensions: 120" in Length; 24" ID. Equipped with dual 14" long x 10" wide top product feed ports and dual 34" long x 8" wide flip-up bolt down top access covers and 92" long bolt down flip open bottom access doors. Has inner 6" long x 3" wide paddles and 1" wide x 1/2" thick single ribbon on 1" OD spokes set on 4" OD shaft. 20" long x 11" wide flanged end bottom discharge with (8) 1/4" bolts holes set on 6" centers with 19" floor clearence. 7-1/2 Hp belt to motor drive with safety guarding. Mounted on stainless steel frame.
This style of mixer uses both the paddle agitator design and simultaneously giving end-to-end mixing action of the ribbon design.

OAD: 160" L x 36" W x 54" H