Sealer Bag Machines

Used Sealer Bag Equipment

Sealer bag equipment or bag sealing equipment is designed to seal various kinds of pre-made bags or pouches. Bags can be sealed using impulse heat, hot melt glue, hot air (to re-activate pre-applied glue), thread stitching, or many other bag sealing methods. Depending on the bag sealer machine, the bag may have the opening of the bag folded over prior to sealing. Bag sealers can be designated as semi-automatic or automatic. Semi-automatic bag sealers require the operator to present the bag to the bag sealer in the proper manner and to activate the bag sealing cycle. The operator is responsible for closing the bag, and tucking the bags flaps, if necessary. The operator is also responsible for discharging the bag from the machine. Automatic bag sealers have the bag fed into the bag sealer automatically with a conveyor or by some other method. The bag sealer then automatically closes the bag, automatically tucks the bag flaps if necessary, and automatically seals the bag.

Contact Us

Sealer Bag Equipment In Stock

Doboy Sealer Bag Glue GS1000S

  • Manufacturer: Doboy
  • Model Number: GS1000S
  • Frain Number: 5J0950

Bosch / Doboy, Model GS1000S, High speed, mount over conveyor, double fold, hot melt glue, bag sealer. Rated up to 100 feet per minute, with number of bags – depending on materials and application. Bag size: 3 to 20lbs. Bag Width: 3½" to 15". Equipped with 183" Long x 4½" Wide product conveyor, top bag carrier chain, single pair of heat seal bars to seal inner laminate layer, outer glue seal station with Nordson hot melt glue unit, (2) fold stations, rotary trimmer and compression section. Control panel has glue gun, glue heat and glue on / off switches, temperature and variable speed controls, run / jog, start and e-stop buttons with Lexan safety guarding. Mounted on (4) leg frame with locking casters.

OAD: 183" L x 50" W x 88"H

Get a Free Quote Call: 630-629-9900

Fischbein Sealer Bag Hot Air PILS300

  • Manufacturer: Fischbein
  • Model Number: PILS300
  • Frain Number: R35120

Fischbein Model PILS 300, Top inch inner liner hot air bag sealer rated up to 75 linear feet per minute with number of bags – depending on materials, application and operator dexterity. Multi-wall paper, pinch bag sealer that have a preapplied hot-melt adhesive strip and a heat-sealable polyethylene or foil inner liners, can also be used to seal standard pinch-style bags that do not have inner liners. Equipped with 192" long x 12" wide powered bag belt conveyor, pre-heating station for pre-applied glue with single fold over station, final bag heat sealing and cooling area and hand crank height adjustable. Control panel control panel has digital temperature display, key pad for variable speed control, and dual emergency stop buttons.and machine start / stop button. Breakaway design eliminates costly downtime caused by bag jams while allowing easy cleaning and service of the hot air manifold and bag folder. Mounted on height adjustable frame with casters to roll over existing conveyor.

OAD: 193" L x 46" W x 82" H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R34280

Bandrite Model 6000, Right to left, automatic, continous motion, in line, band style, bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 54"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 54"
  • Frain Number: R35911

CVP Model Mark lll, Semi automatic, modified atmosphere, vacuum and gas flush bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 54" hot bar sealing system has Cool-Edge seal bar and Teflon® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 54" L x 40" W x 58" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 54"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 54"
  • Frain Number: R35910

CVP Model Mark lll, Semi automatic, modified atmosphere, vacuum and gas flush bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 54" hot bar sealing system has Cool-Edge seal bar and Teflon® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 54" L x 40" W x 58" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII

  • Manufacturer: CVP Systems
  • Model Number: MKIII
  • Frain Number: R34531

CVP Model Mark lll, semi automatic vacuum and gas flush modified atmosphere bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system has Cool-Edge seal bar and Teflon® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 40" L x 38" W x 62" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII

  • Manufacturer: CVP Systems
  • Model Number: MKIII
  • Frain Number: R34530

CVP Model Mark lll, semi automatic vacuum and gas flush modified atmosphere bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system has Cool-Edge seal bar and Teflon® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 40" L x 38" W x 62" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 30"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 30"
  • Frain Number: R35261

CVP Model Mark lll, Semi automatic, vacuum / gas flush, configured for M.A.P. (modified atmosphere package) bag sealer with number of bags per minute – depending on materials, application and operator dexterity. All seal head components are constructed of T-303 / 304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system and Cool-Edge seal bar with Teflon® tape, dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on stainless steel frame with casters.

OAD: 41" L x 40" W x 60" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 30"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 30"
  • Frain Number: R35260

CVP Model Mark lll, Semi automatic, vacuum / gas flush, configured for M.A.P. (modified atmosphere package) bag sealer with number of bags per minute – depending on materials, application and operator dexterity. All seal head components are constructed of T-303 / 304 stainless steel with an electro-polished finish. Equipped with 30" hot bar sealing system and Cool-Edge seal bar with Teflon® tape, dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes with 9-1/4" spacing. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount with joystick control and dry vane vacuum pump with throttle valve, gas flush port. Mounted on stainless steel frame with casters.

OAD: 41" L x 40" W x 60" H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII 54"

  • Manufacturer: CVP Systems
  • Model Number: MKIII 54"
  • Frain Number: R34801

CVP Model Mark lll, semi automatic vacuum and gas flush modified atmosphere bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 54" hot bar sealing system has Cool-Edge seal bar and Teflon® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 56"L x 42"W x 58"H

Get a Free Quote Call: 630-629-9900

CVP Systems Sealer Bag Vacuum MKIII

  • Manufacturer: CVP Systems
  • Model Number: MKIII
  • Frain Number: R34800

CVP Model Mark lll, semi automatic vacuum and gas flush modified atmosphere bag sealer configured for M.A.P package with number of bags per minute – depending on materials, application and operator dexterity. All head components are constructed of T-303/304 stainless steel with an electro-polished finish. Equipped with 54" hot bar sealing system has Cool-Edge seal bar and Teflon® tape, with dual snorkels, side mounted Cuno filter, Twin Teflon vacuum / gas flush particle probes. Control panel has (4) program PLC Micro-Controller with 2 hand control, vacuum and gas flush control logic, low gas warning system, pneumatically operated adjustable head mount and dry vane vacuum pump with throttle valve, gas flush port. Mounted on H style base frame with casters.

OAD: 56"L x 42"W x 58"H

Get a Free Quote Call: 630-629-9900

Bandrite Sealer Bag Band 6000

  • Manufacturer: Bandrite
  • Model Number: 6000
  • Frain Number: R34281

Bandrite Model 6000, Automatic, in line, band style bag sealer rated from 0 to 750 inches per minute with number of bags – depending on materials, application and operator dexterity. Equipped with angled sealing tilt away head has ¾" wide heat sealing and cooling bars with non-marking carrier belts, adjustable running speeds and temperature controls up to 600 Deg F. bag trim station, 1 line coder and hand crank height adjustable for different size bags. Heat and cool down on / off, temperature controller and speed control dial. Mounted over 6" wide x 96" long stainless steel belt conveyor with adjustable guides and powered by ¼ Hp drive.

OAD: 96" L x 36" W x 59" H

Get a Free Quote Call: 630-629-9900
1 2 3 5