See us at the PMCA Show in Lancaster, PA on 4/15
Home » Fillers - Cup Filling » Inline » Page 2
Filler Cup Inline. An inline cup filler fills and seals cups using straight line tooling to index cups. The machine de-nests cups, indexes the cups below the filler where the cups are filled, indexes the cups below the sealing head where the cups are sealed, and indexes the cups to the discharge station where the cups are discharged. Multiple lanes of cups to be processed simultaneously by this type of machine (depending on original machine configuration) allowing for greater machine output. Machine can be outfitted with either pre-cut or roll stock film seals, overlid applicator, and different filling heads for different types of products.
Modern Packaging, Model SL1X4, automatic, inline, stainless steel, 4 lane, cup filler and die cut heat sealer. Rated from 40 to 120 containers per minute – depending on materials, application and machine configuration. Equipped 1×4 plates set on 4½" centers, cup / tray de-nest station, (2) filling stations, no container / no fill, die cut film seal. Control panel has an AB controller with touch screen HMI, digital temperature controllers and on/off switches for each station. Mounted on stainless steel base frame with safety guarding.
OAD: 145"L x 60"W x 88"H
Modern Packaging, Model SL 1X4, automatic, inline, stainless steel, 4 lane, cup filler, roll stock heat sealer and overlidder. Rated from 40 to 120 containers per minute – depending on materials, application and machine configuration. Equipped 1×4 plates set on 6" centers, cup / tray de-nest station, piston filling station, roll stock film seal and over lidder. Control panel has an AB controller with touch screen HMI, digital temperature controllers and on/off switches for each station. Mounted on stainless steel base frame with safety guarding.
OAD: 135"L x 60"W x 96"H
Holmatic Model PR-3S, 3 lane, inline, stainless steel, cup filler, roll stock film sealer rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Sanitary stainless steel and hard anodized aluminum construction. Container size range: 5" to 7" in Diameter; up to 7.3" in Height. Fill volume up to 90oz each head. Change parts required to accommodate different sizes. Equipped with 180" long cup conveyor has 8-3/4" long x 24" wide carrier plates currently set with (3) 4-1/4" OD cup pockets set on 9" centers, cup de-nest station, 30" long x 17" wide x 24" deep, stainless steel, jacketed, agitated product hopper, (3) head piston filler, with (3) 15" long x 2-1/4" ID pistons, and 2-1/4" OD nozzles (change part per application) no container / no fill, automatic film roll stock feeder and rewinder with die cut heat sealing stations. Control panel has A/B PLC controller with A/B onboard panelview and operator read out (3) heat seal, start, stop, e-stop controls. Mounted on stainless steel frame with cage style safety guarding. Mounted on stainless steel frame with cage style safety guarding. Recommended for wipedown environments, applications range from hard candy to dry soup and snack foods to pet treats.
OAD: 193" L x 92" W x 91" H
Holmatic Model PR-3S, 3 lane, inline, stainless steel, cup filler, roll stock film sealer rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Sanitary stainless steel and hard anodized aluminum construction. Container size range: 5" to 7" in Diameter; up to 7.3" in Height. Fill volume up to 90oz each head. Change parts required to accommodate different sizes. Equipped with 180" long cup conveyor and has 8-3/4" long x 24" wide carrier plates with (3) 4-1/4" OD cup pockets set on 9" centers, cup de-nest station, 30" long x 17" wide x 24" deep, stainless steel, jacketed, agitated product hopper, (3) head piston filler, with (3) 15" long x 2-1/4" ID pistons, and 2-1/4" OD nozzles (change part per application) no container / no fill, automatic film roll stock feeder and rewinder with die cut heat sealing stations. Control panel has A/B PLC controller with A/B onboard panelview and operator read out (3) heat seal, start, stop, e-stop controls. Mounted on stainless steel frame with cage style safety guarding. Mounted on stainless steel frame with cage style safety guarding.Recommended for wipe down environments, applications range from hard candy to dry soup and snack foods to pet treats.
OAD: 180" L x 80" W x 84" H
Holmatic Model PR-3S, 3 lane, inline, stainless steel, tray filler, roll stock film sealer rated from 30 to 120 trays per minute – depending on materials, application and machine configuration. Sanitary stainless steel and hard anodized aluminum construction. Container size range: per application. Fill volume up to 90oz each head. Change parts required to accommodate different sizes. Equipped with 180" long cup conveyor has 8-3/4" long x 24" wide carrier plates with (3) 7-3/4" long x 5-1/2" wide rectangle tray pockets set on 9" centers, tray de-nest station, 30" long x 17" wide x 24" deep, stainless steel, jacketed, agitated product hopper, (3) head piston filler, with (3) 15" long x 2-1/4" ID pistons, and 2-1/4" OD nozzles (change part per application) no container / no fill, automatic film roll stock feeder and rewinder with die cut heat sealing stations. Control panel has A/B PLC controller with A/B onboard panelview and operator read out (3) heat seal, start, stop, e-stop controls. Mounted on stainless steel frame with cage style safety guarding. Recommended for wipedown environments, applications range from hard candy to dry soup and snack foods to pet treats.
OAD: 190" L x 72" W x 84" H
OAD: 180" L x 80" W x 90" H
Volumetric Technology Inc, servo driven, (4) head piston and 2-up inline cup filler, sealer. Rated from 5 to 50 cups per minute – depending on materials and application. All 316 stainless steel, FDA / USDA approved material contact parts. Fill size range depending on piston and container being run, with accuries of +/- .25 of 1% on homogenous products with proper change parts. Equipped with 24" x 20" x 24" stainless steel conical product hopper and (4) 2-1/2" OD x 11" long stainless steel pistons with (4) 2" OD positive cut off nozzles with power on / off, every / every other, manual / auto mode and single cycle control switches. 2-up configuration cup filler, sealer with 112" long x 15" wide cup conveyor, has 14-1/2" long x 6" wide cup carrier plates, has 18" high dual end roller cup denesters with no container / no fill, (2) dual fill stations, roll stock film with servo rewind, dual head heat sealers and film cut-off. Control panel has A/B controller with Quickpanel mini panel view, (2) Watlow heater controllers and start, stop and e-stop push buttons. Mounted on stainless steel frame with casters.
OAD: 153 L x 72" W x 80" H
Piston Filler for Holmatic.
2 Lane, automatic, inline, stainless steel, 2-up cup filler, roll stock film and heat sealer, with number of cups per minute – depending on materials, application and machine configuration. Container size and fill range per are application with proper change parts. Equipped with 307" long x 14" wide empty cup conveyor, 2-up configuration and has 14" long x 4" wide empty cup carrier plates with (2) 3-3/8" ID cup pockets set on 6" centers and dual 16 pocket rotary empty cup magazines has dual end roller cup denesters with overhead covers to (6) 3 each side Roto Fol 2000 rotary product feeders with no container / no fill and brush box, roll stock film rollers has dual (4) head heat film sealers and 36" long (3) eagle belt discharge conveyor. Remote control panel has A/B controller with board A/B panel view controls with 1 and 2 lane also 1 to 4 head Watlow heat sealer controllers with film on / off and speed control dials with start, reset, stop and e-stop push buttons. Mounted on heavy duty stainless steel base frame with casters and leveling legs.
OAD: 243" L x 60" W x 70" H
World Cup Model 2-up, automatic, inline, stainless steel, cup filler, roll stock film and heat sealer, with number of cups per minute – depending on materials, application and machine configuration. Container size and fill volume per application with proper change parts. Equipped with 84" long x 7" wide flex link empty cup conveyor with (4) rotary head cup denester with start, stop and e-stop push button controls, to empty cup diverter conveyor to dual accumlation empty cup conveyors with cup aligners and single head cup loaders to 238" long x 8" wide, 2-up configuration cup transport conveyor has 12" long x 4" wide empty cup carrier plates with (2) 4" OD cup pockets set on 6" centers, (2) 5-1/2" ID x 8-1/2" deep stainless steel funnel style product hoppers and roll stock film rollers with (2) film heat sealers. Control panel has A/B controller with lane 1 and 2 heater on / off switches and heat controllers advance film and stop button with e-stops and has 58" long dual 6" wide discharge conveyor. Mounted on stainless steel base frame.
OAD: 238" L x 60" W x 57" H Cup Filler 96" L x 32" W x 89" H Cup Denester
Osgood Model 4700E, automatic, inline, stainless steel, cup filler with number of cups per minute – depending on materials and application. Equipped with 29-1/4" long x 4-1/4" wide cup carriers, 20" OD x 30" long stainless steel product hopper, 6 filling heads positive cut off fill nozzels set on 5" centers. Remote touch pad controller with panelview and e-stops. Mounted on heavy duty stainless steel frame with safety door guarding. Capable of filling liquid, viscous and pumpable products into pre-made containers and meets 3A sanitary standards.
OAD: 201" L x 72" W x 76" H
Autoprod / Oystar, Model CMS, Automatic, stainless steel, 2) up cup filler . Rated from 60 to 240 containers per minute – depending on materials, application and machine configuration. Container size range to 3½" in diameter and 4" in height with 16½" x 4" plates set on 4½" centers. Equipped with 31" wide x 15" long x 24" deep product hopper, cup denester, (8) 9 oz pistons, (8) filling nozzles and a rotary pic-n-place die-cut film with heat sealer. Control panel has A/B controller and digital readout with start, stop, reset and e-stop push buttons with statis light bar. Mounted on stainless steel frame with safety guarding.
OAD: 195"L x 60"W x 106"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.