See us at the PMCA Show in Lancaster, PA on 4/15
Home » Labeler » Glue Wrap » Page 2
Frain Industries can help you with your glue wrap labeler project no matter how big or small your labeling needs. Labeler Glue Wrap is a glue labeler which applies a wrap-around label to circular containers and packages. Glue labels require glue to be applied to the back of the label by the machine prior to the label being applied to the container so that the label will adhere to the container.
New Way, Model E5, Automatic, roll through, hot glue, wrap labeler. Rated 30 to 300 labels per minute – depending on materials, application and machine configuration. Container size range: 1-3/4" to 4-3/8" in Diameter; 1-3/4" to 8-3/4" in Label Height. Equipped with dual container handling belts, hot glue pot with direct contact wheel applicators, single mechanical label feed magazine and roll on label application section with compression brushes and cold glue lap seal. Mounted on base frame with locking casters. Capable of handling metal, plastic, composite and glass containers with proper change parts.
OAD: 90"L x 39"W x 64"H
Mateer Burt, Model 704, automatic roll through glue labeler. Rated from 10 to 600 containers per minute – depending on materials, application and machine configuration. Container size range: 1¾" to 7¼" In Diameter; 1-9/16" to 10½" in Height. Label size range: 4-5/8" to 24" in Length; 1¼" to 9¼" in Width. Equipped with dual container handling gripper v-belts, hot glue pots with direct contact wheel applicators, single hydraulic label feed magazine, no container / no glue, with start / stop push button controls. Mounted on base frame. Designed to apply full wrap glue labels to cylindrically shaped containers of metal, plastic and (glass with proper change parts).
OAD: 115" L x 36" W x 53" H
Mateer Burt, Model 704 automatic, roll through, glue labeler rated from 10 to 600 containers per minute – depending on materials and application. Container size range: 1-3/4" to 7-1/4" In Diameter; 1-9/16" to 10-1/2" in Height. Label size range: 4-5/8" to 24" in Length; 1-1/4" to 9-1/4" in Width. Equipped with gripper V-belts, single label feed magazine with mechanical adjustment, hot glue pot with direct contact finger applicators and cold glue belt lap seal, no container / no glue with start / stop push button and on /off glue pump switch controls with attached __" long in feed and discharge conveyors, with 38" infeed and discharge height. Mounted on (4) leg height adjustable frame. Designed to apply full wrap labels to cylindrically shaped containers, both metal and plastic containers also (glass with proper change parts).
OAD: 119" L x 30" W x 55" H
Trine Model 6500, stainless steel, roll fed, wrap around, hot melt glue labeler designed to apply a full or partial wrap as well as spot labels to containers, rated from 50 to 250 containers per minute – depending on materials and application. Container size range: 3-3/4" to 6" in diameter, Label size range: 9.5" to 19" in Length. Capable of running glass, plastic and metal, full or empty containers with proper change parts and the stainless steel construction is good for both wet or dry applications. Equipped with dual 24" OD vertical film roll stand, worm screw to star wheel in feed, rotary (12) pocket container handling disc with 3-1/4" wide thru the machine plastic delron container belt conveyor, has 1 station on vacuum drum, FIFE web tracker, peeler plate, label cutting and transfer systems, vacuum drum with hot melt glue unit and compression belt section. Control panel has PLC controller, with on / off label feed and off / auto apply glue, flow gate open / close, machine and dancer speed and temperature controllers, with start and e-stop push buttons. Mounted on heavy duty base frame with flip-up safety door guarding.
OAD: 156" L x 80" W x 72" H
Mateer Burt, Model 408, roll thru hot glue labeler rated from 10 to 600 containers per minute – depending on materials and application. Container size range: 1¾" to 4½" In Diameter x 1(9/16)" to 10½" in Height. Label size range: 4-5/8" to 15" in Length x 1½" to 9¼" in Width. Equipped with single label magazine, single container gripper V-belt, hot glue pot with direct container wheel and lap seam cold glue applicator with valco controller. Control panel with start / stop machine push button controls. Mounted on painted frame and has (4) height adjustable leveling legs.
OAD: 76" L x 34" W x 63" H
Krones, Model Rondella, automatic, inline, wrap around glue labeler. Rated 80 to 400 container per minute – depending on materials and application. Label size range: 6½" to 17-1/8" in Length; 1/8" to 7-7/8" in Height. Container size range: 2" to 5-1/8" in Diameter; 2-3/8" minimum to depending on application for maximum in Height. Equipped with 24" long pre-cut label magazine, 164" long x 3¼" wide container conveyor with spacing wheel, (2) hot glue pod system for leading and trailing edge glue seams, wrap station and control panel. Mounted on (4) leg height adjustable frame.
OAD: 170"L x 60"W x 70"H
P E, Model SPLENDID L7A, automatic inline stainless steel cold glue, partial or full wrap around labeler. Round container size range: 1.6" to 5.9" in Diameter; 4.3" to 15" in Height. Label size range: 2" to 18” in Length; 1.6" to 7" in Height. Equipped with 106" long by 5" wide conveyor, worm screw in feed, pre-cut sheet stock label magazine, 5" high horizontal stripe cold glue wheel applicator system and 40" long x 7" high wrap station. Control panel with start, e-stop push button controls and interlock safety guarding. Mounted on height adjustable legs. Change parts required to accommodate size ranges. Speed dependent on materials, application and machine configuration.
OAD: 110"L x 75"W x 84"H
Krones, Model Rotina II, automatic, inline, cold glue spot or wrap labeler. Rated from 50 to 135 containers per minute – depending on materials and application. Container size range: 2” to 5¾"’ in Diameter; minimum of 3-1/8" in Height. Label size range: 2¼” to 11” in Length; ¼" to 9" in Height and capable of handling glass / plastic containers and metal cans with proper change parts. Equipped with 100" long x 4½" wide Delrin belt conveyor with adjustable guide rails, worm screw infeed, 19" long pre-cut label magazine, 9" high finger pick off and glue wheel, 28" long x 9" high wrap station, no container / no label with start, stop, and e-stop push button controls. Mounted on base frame with adjustable height legs.
OAD: 107"L x 48"W x 46"H
Mateer Burt, Model 408, automatic roll through glue labeler. Rated from 50 to 600 containers per minute – depending on materials and application. Container size range: 1¾" to 4½" In Diameter x 1-9/16" to 10½" in Height. Label size range: 4-5/8" to 15" in Length x 1¼" to 9¼" in Width. Equipped with hydraulic lift label magazine, 5/8" gripper belt, hot glue pot with direct container contact finger applicators, cold band lap seal, has machine and label feed start / stop push button controls.
OAD: 105"L x 36"W x 50"H
Mateer Burt Model 704 roll through glue labeler. Container size range: 1-3/4" to 7-1/4" In Diameter x 1-9/16" to 10-3/4" in Height. Label size range: 4-5/8" to 24" in Length x 7/8" to 10" in Width. Equipped with gripper V-belts, hot glue pot with direct container contact finger applicators and glue belt system. Speed dependant on materials, application and machine configuration.
OAD: 148" L x 30" W x 52" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.