Mixers - Paste Mixing Machines

Rietz Mixer Paste Horizontal RSV23K6405

• Manufacturer: Rietz
• Model Number: RSV23K6405
• Frain Number: 5E1447

Rietz Model RSV23K6405, 2000 lb. stainless steel, dual shaft ribbon mixer with amount of product per hour – depending on materials and application. Chamber dimensions: 64" in Length; 48" in Width; 32" in Depth. Equipped with pneumatically actuated cover, dual reversing ribbons set on 4" shafts with 2" wide x 1/4" thick ribbons, with dual drives and has pneumatically operated end discharge with 36" floor clearance. Mounted on (4) leg heavy duty frame.

OAD: 100" L x 84" W x 82" H

Stokes Mixer Paste Single Arm 21J

• Manufacturer: Stokes
• Model Number: 21J
• Frain Number: 5H2803

Stokes single arm, 304 stainless steel, sigma style mixer with working capacity of up to 4.7 ft³. Chamber dimensions: 27" in Length; 22" in Width; 27" in Depth, Equipped with single sigma mix arm, hinged cover, 3 hp motor drive and hand crank tilt discharge. Control panel with push button start / stop.

OAD: 60"L x 30"W x 60"H

Mepaco Mixer Paste Horizontal 170

• Manufacturer: Mepaco
• Model Number: 170
• Frain Number: 5G7132

Mepaco, Model 170, 304 stainless steel dual trough, low pressure jacketed, vacuum paddle blender. Pounds of product per hour – depending on materials and application. Capacity: 115 ft³ (100 ft³ working). Trough dimesions: 110" in Length; 52" in Width; 38" in Depth. Equipped with pneumatic lift up top cover, (2) sets of 14" wide x 8" high x ¼" thick paddles, 3½" diameter motor shaft and 4" diameter mixing shaft. (2) 20" x 18" pneumatic flush mount bottom gate discharges with 42" ground clearance. Powered by 40 Hp motor drive..

OAD: 156" L x 80" W x 96"H

Alpine Mixer Paste Horizontal 160-Z

• Manufacturer: Alpine
• Model Number: 160-Z
• Frain Number: 5H2760

Alpine, Model 160Z compact, pin mill with pounds of product per hour – depending on materials and application. Stainless steel contact parts. Equipped with 9" wide x 9" long x 8" deep product hopper, 6" OD rotor / stator pin discs powered by 5 Hp motor drive with variable speed gearbox and 9½" long x 6½" wide discharge chute with 26" ground clearance. Control box has push button start / stop controls. Mounted on a stainless steel base with casters.

OAD: 42"L x 36"W x 55"H

Peerless Mixer Paste Double Arm DBL ARM

• Manufacturer: Peerless
• Model Number: DBL ARM
• Frain Number: R28812

Peerless Model Double Arm,120 gallons full and 80 gallons working capacity, sigma mixer, with the number of gallons of product per hour – depending on materials and application. Stainless steel contact parts. Equipped with 28” long x 42" wide x 31” deep product hopper has stainless steel double sigma mixing blades, (2) piece lift off cover with power tilt discharge and (3) belt to motor drive with safety guarding. Control panel has mixer and timer start, stop, jog, e-stop push buttons with timing manual, slow, fast and back dump control switches with red lion timer. Mounted on heavy duty frame.

OAD: 84" L x 60" W x 72" H

Readco Mixer Paste

• Manufacturer: Readco
• Model Number:
• Frain Number: 5F0653

Readco, twin shaft, jacketed, continuous mixer / processor with pounds of product per hour – depending on materials and application. Equipped with bolt down lift off cover, 7" x 7" OD flanged top in feed, 40" x 10" jacketed mix chamber, (8) 3/4" ID threaded jacketed in / outlet ports, 40" long x 5" OD stainless steel twin shaft agitators, 12" x 7" OD flanged bottom discharge with 62" floor clearance and has variable speed drive. Mounted on mild steel base frame with casters. Capable of handling most viscosities liquid / liquid, liquid / solid, solid / solid and typical applications include kneading, cooking, drying, low / medium pressure extrusion and pelletizing.

OAD: 132" L x 36" W x 83" H

Baker Perkins / B P Process Eq Mixer Paste Double Arm ¾ GAL

• Manufacturer: Baker Perkins / B P Process Eq
• Model Number: ¾ GAL
• Frain Number: 5H2430

Baker Perkins, Model 0.1 ft³ (¾ gallon) working capacity, jacketed, carbon steel, double arm, sigma blade mixer with pounds of product per hour – depending on materials and application. Inner mixing chamber dimensions: 5½" in Length; 7¼" in Width; 7" in Depth. Equipped with carbon steel contact parts, bolt down cover with pressure guage, 2 Hp motor drive, hand tilt with 30" discharge height and (3/8)" NPT connections for low pressure jacket. Mounted on a painted steel base frame with push button start / stop controls.

OAD: 40"L x 24"W x 41"H

Goodway Mixer Paste Vertical VBM-2000

• Manufacturer: Goodway
• Model Number: VBM-2000
• Frain Number: 5G9410

Goodway, Model VBM 2000, 304 stainless steel, slurry mixer and transfer system. Rated to 2,000 lb batches with 4 to 9 minutes mix times per batch – depending on materials, application and machine configuration. Equipped with a 44" ID x 52" straight wall stainless steel mixing tank (300 gallons) with half flip up bolt down cover, two stationary stator assemblies one each side and inner rotating mix blades with bottom platform mounted ___ Hp main motor drive and ___ hp secondary motor drive for slow speed mixing while pumping. Waukesha Model 130 postive displacemet transfer pump with 3½"OD / 3"ID seated bevel style inlet/outlet ports with 10" ground clearance and 10 Hp motor drive with a 10:1 ratio gearbox for a discharge rate of 45 gpm. Control panel with push button start / stop for mixer and pump, timer dials for mixer and pump and product valve open / close switch. Mounted on a 96" long x 60" wide stainless steel platform.

OAD: 96"L x 60"W x 84"H

AMFEC American Food Equip Coy Mixer Paste Horizontal 510

• Manufacturer: AMFEC American Food Equip Coy
• Model Number: 510
• Frain Number: 5G7130

AMFEC, Model 510, 304 stainless steel dual trough vacuum paddle blender. Pounds of product per hour – depending on materials and application. Capacity: 56 ft³ (40 ft³ working). Trough dimesions: 72" in Length; 46" in Width; 32" in Depth. Equipped with pneumatic lift up top cover, (2) sets of 12" wide x 9" high x 3/8" thick paddles, 2½" diameter motor shaft and 3¼" mixing shaft. (2) 19" x 8" pneumatic end gate discharges with 34" ground clearance. Powered by (2) 7½ Hp motor drives. Mounted on heavy duty frame.

OAD: 113" L x 60" W x 83" H

Goodway Mixer Paste Horizontal CM35

• Manufacturer: Goodway
• Model Number: CM35
• Frain Number: 5H1270

Goodway compact, high shear, continuous, stainless steel, rotar, stator, aerator, mixer with rates per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Control panel has rotor / mixer and pump supply speed controls, rotor and pump stops, air supply, and back pressure gauges with flowmeter. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.

100 gallon, 304 stainless steel, slant bottom holding tank. Vessel Dimensions: 30" diameter x 47" deep with an 18" straight wall. Equipped with a 3½"OD / 3"ID Seated Bevel style bottom discharge with 11½" ground clearance. Mounted on (3) legs.

OAD: 64" L x 40" W x 48" H (mixer)
OAD: 36"L x 34"W x 63"H (tank)

Goodway Mixer Paste Horizontal CM35

• Manufacturer: Goodway
• Model Number: CM35
• Frain Number: 5H1272

Goodway Model CM35, compact, stainless steel, continuous, high shear, rotar, stator, aerator, mixer rated from 250 to 4800 pounds of product per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Bottom product pump with 2-1/2" OD threaded in/outlet ports. Control panel has rotor / pump speed controls and start / stop push buttons. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.

100 gallon, 304 stainless steel, slant bottom holding tank. Vessel Dimensions: 30" diameter x 47" deep with an 18" straight wall. Equipped with a 3½"OD / 3"ID Seated Bevel style bottom discharge with 11½" ground clearance. Mounted on (3) legs.

OAD: 78" L x 40" W x 51" H (mixer)
OAD: 36"L x 34"W x 63"H (tank)

Goodway Mixer Paste Horizontal CM35

• Manufacturer: Goodway
• Model Number: CM35
• Frain Number: 5H1269

Goodway Model CM35, compact, stainless steel, continuous, high shear, rotar, stator, aerator, mixer rated from 250 to 4800 pounds of product per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Control panel has mixer / pump speed controls air suipply, head pressuree rergulator, and head presasure gaugesa flow and hour meters. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.

145 gallon, 304 stainless steel, single wall storage tank. Vessel Dimensions: 29" in Diameter; 66" straight wall. Equipped with a slant bottom and a 4.5" OD side discharge with 16" of floor clearance. Mounted on three steel legs.

OAD: 66" L x 35" W x 78" H (Mixer)
OAD: 33" L x 33" W x 84" H (Tank)