Mixers - Paste Mixing Machines

Automated Food Systems Mixer Paste Horizontal 5 FT³

• Manufacturer: Automated Food Systems
• Model Number: 5 FT³
• Frain Number: 5H0440

Automated Food Systems, 5 ft³, 304 stainless steel, paddle mixer with number of product per hour – depending on materials, application and machine configuration. Inner mixing chamber dimensions: 24" in Length; 24" in Width; 28" in Depth. Equipped with flip up cover, 1½" OD mixing shaft with (4) wire beater paddles, (2) 1½" OD charge ports, 3½"OD / 3" ID Tri-clamp style center bottom discharge with butterfly valve and 11" floor clearence. Powered by a 5 Hp. Control panel with an AB controller, push button start / stop and timer indicator. Mounted on a stainless steel frame base with leveling legs.

OAD: 55"L x 35"W x 71"H

SELA Maschinen Gmbh Mixer Paste Double Arm 1 GAL

• Manufacturer: SELA Maschinen Gmbh
• Model Number: 1 GAL
• Frain Number: 5G9695

Sela, Weber & Seelander, 1 gallon, double arm naben mixer. Internal mixing chamber dimensions of 8" long x 7" wide x 8" deep for a working capacity of 1 gal. Equipped with 304 stainless steel mixer arms, a 11" x 9¾" lift up lid, 5" long x 1½" high x ¼" thick naben blades powered by a 1 Hp drive, manual tilt discharge with a 10" discharge height and push button start / stop controls. Mounted on a painted base frame.

OAD: 30"L x 24"W x 31"H

Perten North America Mixer Paste Double Arm DOUGHLAB

• Manufacturer: Perten North America
• Model Number: DOUGHLAB
• Frain Number: R27130

Newport Scientific, Model DOUGHLAB, stainless steel, jacketed, dual sigma table top lab dough analyser. Equipped with 3¼" long x 4¾" wide x 4½" deep mixing chamber with dual 3¼" long x 2½" wide x (1/8)" Thick sigma style mixing blades and VWR 6 liter reservoir cooling / heating circulating bath system. Determines water absorption of flour and dough development time and other dough mixing parameters. Uses the traditional 20 minute test and the new 10 minute high speed mixing test that increases lab through put and efficiency and improves analysis results by making it easier to interpret samples with long development times.

OAD: 40"L x 24"W x 14"H

Colton Mixer Paste Horizontal 6 FT³

• Manufacturer: Colton
• Model Number: 6 FT³
• Frain Number: 5G7635

7 ft³ ( 5.7 ft³ workable), paddle mixer with stainless steel contact parts. Inner mixing chamber dimensions: 26" in Length; 19" in Width; 23" in Depth. Equipped with a 1½" diameter motor shaft, 1½" diameter mixing shaft with 1½" x 8" stainless steel paddles powered by a 2 Hp drive with variable speed control, Waukesha model 60 positive displacement pump powered by a 2 hp drive with a variable speed gearbox and 3" OD / 2½" ID Tri-clamp style discharge with 9" ground clearance. Mounted on stainless steel base frame with casters.

OAD: 48" L x 28" W x 55" H

Oakes Mixer Paste Horizontal 14MF20I

• Manufacturer: Oakes
• Model Number: 14MF20I
• Frain Number: R26850

Oakes Model 14MF, stainless steel, high shear, continuous rotor / stator, pin mill mixer rated up to 4,000 lbs per hour – depending on materials, application and machine configeration. Equipped with 14" diameter jacketed mixing head with 2-1/2" OD product inlet, radial flow disc with high shear action consisting of front / rear stator and 15 Hp motor. Waukesha Model 30 feed pump geared to 245 gallons per hour. Control panel with start / stop controls, counters and dual variable speed drives (mix head and pump). Mounted on heavy duty base frame.

OAD: 70" L x 36" W x 62" H

Newport / Perten Scientific No Mixer Paste Double Arm DOUGHLAB

• Manufacturer: Newport / Perten Scientific No
• Model Number: DOUGHLAB
• Frain Number: R27131

Newport Scientific, Model DOUGHLAB, stainless steel, jacketed, dual sigma table top lab dough analyzer. Equipped with 3¼" long x 4¾" wide x 4½" deep mixing chamber with dual 3¼" long x 2½" wide x (1/8)" Thick sigma style mixing blades and VWR 6 liter reservoir cooling / heating circulating bath system. Determines water absorption of flour and dough development time and other dough mixing parameters. Uses the traditional 20 minute test and the new 10 minute high speed mixing test that increases lab through put and efficiency and improves analysis results by making it easier to interpret samples with long development times.

OAD: 40"L x 24"W x 14"H

Baker Perkins / B P Process Eq Mixer Paste Double Arm 2 GAL

• Manufacturer: Baker Perkins / B P Process Eq
• Model Number: 2 GAL
• Frain Number: 5G6631

Baker Perkins, 2 Gal, dual sigma blade, jacketed lab size mixer with 316 stainless steel contact parts. Mixing chamber dimensions: 9" long x 8½" wide x 8" deep. Equipped with an 11" x 11" lift up cover, low pressure jacket, 1½ hp dive and manual tilt handle. Unit mounted on a mild steel base.

OAD: 40" L x 28" W x 46" H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: 5G6921

Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons and 1000 to 3200 rpm per minute – depending on materials, application and machine configuration. Equipped with a 26" diameter product rotating disc, (2) 2" NPT side chamber product charge and discharge ports, (1) 1½" NPT top vacuum port, pressure gauge and 2" NPT bottom drain. Swing open bolt down door has (2) 7¼" OD / 3½" ID front flanged sight ports, 15 Hp (4) belt to motor main drive with safety guarding and Stokes Model 148H-9 2 hp vacuum system with (2) 1¾" NPT fittings. Mounted on a 62" long x 49" wide base platform frame.

Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.

OAD: 62"L x 50"W x 72"H

RMF Companies Mixer Paste Horizontal 28-0750

• Manufacturer: RMF Companies
• Model Number: 28-0750
• Frain Number: R27070

RMF, Model 28-0750, 22 ft³ total (15 ft³ workable), dual paddle mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 45" in Length; 36" in Width; 26" in Depth. Equipped with flip up grated covers, (2) 2¼" diameter motor shafts / 3½" diameter mixing shafts with 7" x 5" stainless steel paddles independently powered by 3 Hp drives, (2) 15" wide x 5" high end discharges with pneumatic covers and 50" ground clearance, (4) internal liquid spray nozzles supplied by (1) 2" NPT fitting. Mounted on mild steel (4) leg base frame.

OAD: 115" L x 60" W x 80" H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: 5G6860

Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons and 1000 to 3200 rpm per minute – depending on materials and application. Equipped with 26" OD product rotating disc, (2) 2" NPT side chamber product charge and discharge ports, (1) 1½" NPT top vacuum port, pressure gauge, flow rate gage and 2" NPT bottom drain. Swing open bolt down door has (2) 7¼" OD / 4" ID front flanged sight ports, 15 Hp (4) belt to motor main drive with safety guarding and Stokes Model 48H10 vacuum system with (2) 1½" NPT fittings. Mounted on 72" long x 49" wide base platform frame.

Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.

OAD: 76"L x 69"W x 73"H

J H Day Mixer Paste Double Arm 11 CU FT

• Manufacturer: J H Day
• Model Number: 11 CU FT
• Frain Number: 5G4182

J. H. Day 11 ft³, 80 gal working volume, stainless steel double arm sigma blade mixer. Equipped with 38"long x 32¾"wide x 27"deep (inside dimension) x 9/16" thick single wall mixing trough with 2 kneading sigma blades. Tilting trough discharge with 5hp hydraulic power pack, 43"long x 38"wide x 5/16"thick stainless steel hydraulic operated cover with 20"long x 16"wide manway and stainless steel safety grid. Mounted on 98"long x 71"wide x 9" high stainless steel platform.

OAD: 98"L x 78"W x 72"H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: R25920

Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons per minute – depending on materials, application and machine configuration. Equipped with all 316 stainless steel contact parts, 26" ID product rotating disc, with (2) 3"OD / 2¼"ID Tri-Clamp side chamber in feed and discharge product ports with 61" ground clearance, (1) 3-1/2" OD threaded top vacuum port, with pressure gauge and 4" OD threaded bottom drain. Swing open, bolt down door has (2) 7" OD, 3-1/2" ID front flanged sight ports with drip pan, 25 Hp (4) belt to motor main drive with safety guarding and SIHI Model LPHD liquid ring vacuum system has (4) 5" OD, 2" ID flanged ports and 10 Hp motor drive. Mounted on 78" long x 48" wide painted base platform frame.
Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.

OAD: 78" L x 52" W x 87" H