Mixer Powder Machines
Used Mixer Powder Equipment
Commercial and industrial powder mixer equipment and machines encompass a broad range of equipment designed to mix and blend dry:
- powders with powders
- powders with liquids
- mix liquids with liquids
- mix solids with liquids
- mixing applications including multiple components.
Powder Mixer equipment and machines are designed to fit their specific mixing and blending application whether it be powder with powder, or liquid with powder, though different types of mixing and mixing processes can be used to mix the same two components together.
The proper powder mixer for an application requires knowledge of the different substances that are to be mixed together as well as their mixing properties. To determine the proper mixer for the application, the desired outcome or end product for the mixing application needs to be known.
Commercial and industrial mixers are mostly batch but some mixing applications, such as powder to liquid, can be continuous. Batch mixers take a certain amount (batch) of product and process it for a certain amount of time.
Once the product is processed, the batch is removed from the mixer and another batch can be placed in the mixer. Continuous mixers move the product through the mixer so that a continuous stream of mixed product is being discharged.
See also: Liquid Mixers
Related Categories
Mixer Powder Equipment In Stock
J H Day Mixer Powder Paddle S.S. 10.4 CU PADDLE
- Manufacturer: J H Day
- Model Number: 10.4 CU PADDLE
- Frain Number: 5H3031
J.H. Day 10.4 cubic foot, 304 stainless steel, dimple jacketed paddle mixer, with pounds of product per hour – depending on materials and application. Mixing trough (inner) dimmesions: of 48" in Length; 22" in Width; 26" in Depth. Equipped with full dimpled jacket rated to 125 psi at 353 Deg F. with (2) 1" and (3) 2" ID threaded jacket ports. Flip up cover with electrical safety shut-off and (1) piece top product hopper. (6) interior mixing paddles on 2" OD posts mounted on 4" OD shaft. Dish bottom has 3-1/2" OD center bottom discharge with 22" ground clearence with out discharge valve and 10" floor clearence with the discharge valve. Driven by 5 Hp, belt to motor drive with safety guarding. Control panel has main and auto switches with start, stop and e-stop push buttons. Mounted on stainless steel base frame with casters.
OAD: 91" L x 45" W x 73" H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 10 FT³
- Manufacturer: Patterson Kelley
- Model Number: 10 FT³
- Frain Number: 5H3250
Patterson Kelly, Model 10 ft³, 304 stainless steel, twin shell mixer. Rated to 75 lbs per ft³ and Ibs per hour – depending on materials, application and machine configuration. Equipped with (2) 18" ID product ports with bolt down covers, (2) 44" long side V-Walls and (2) 15" long inner V-Walls. 4"ID butterly valve discharge with 12" ground clearance and powered by 2 Hp drive. Requires 80" ceiling clearance with 34" swing radius / 68" swing diameter. Mounted on painted base frame.
OAD: 90"L x 32"W x 68"H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 40 CU FT
- Manufacturer: Patterson Kelley
- Model Number: 40 CU FT
- Frain Number: 5H2804
Patterson Kelly, 40 ft³, stainless steel, twin shell mixer withamount of product per hour – depending on materials and application. Equipped with (2) 17" ID product ports with bolt down covers, (2) 64" long side and (2) 24" long inner V-Walls. 10" ID butterly valve discharge with 40" ground clearance. 150" ceiling clearance with 53" swing radius / 106" swing diameter. Mounted on heavy duty multi-leg frame.
OAD: 145"L x 50"W x 130"H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 1FT³
- Manufacturer: Patterson Kelley
- Model Number: 1FT³
- Frain Number: 5H2620
Patterson Kelly, 1 ft³, Kynar (PVDF) coated, twin shell mixer. Rated to 60 lbs per ft³ with Ibs per hour – depending on materials and application. Equipped with (2) 11½" ID product ports with bolt down covers, (2) 16" long side V-Walls and (2) 7" long inner V-Walls. 6"ID butterly valve discharge with 24" ground clearance. Shell powered by ¾ Hp drive and dog ear style intensifier bar powered by 2 Hp drive. Requires 56" ceiling clearance with 17" swing radius / 34" swing diameter. Control panel has push buttons start / stop and timer dial. Mounted on painted base frame.
OAD: 48"L x 31"W x 50"H
Get a Free Quote Call: 630-629-9900
J H Day Mixer Powder Ribbon S. S. 16 FT³
- Manufacturer: J H Day
- Model Number: 16 FT³
- Frain Number: 5H2466
J H Day, 16 ft³ workable, double ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 60" in Length; 24" in Width; 26" in Depth. Equipped with flip up cover, 2" diameter mixing shaft with 1" wide x ¼" thick (outer) and 1¼" wide x (1/8)" thick (inner) stainless steel ribbons powered by a 5 hp drive. 3½" diameter center bottom discharge has manual slide gate with 54" ground clearence.
OAD: 92"L x 39"W x 85"H
Get a Free Quote Call: 630-629-9900
CFR Mixer Powder Paddle S.S. MIXING CONVEYOR
- Manufacturer: CFR
- Model Number: MIXING CONVEYOR
- Frain Number: 5H1176
CFR, Model Mixing Conveyor, 10 ft³, 304 S/S, continuous paddle mixer. Chamber dimensions: 84" long x 16" wide x 22" deep. Equipped with a clamp down traugh cover, 15" long x 14" wide top feed port with lift off cover, CIP spray ball supplied by a 2"OD / 1½"ID Tri-Clamp style port and a 12" diameter end bottom discharge. 3½" diameter mixing shaft with 6" x 7" paddles and ¾" diameter x 6" long pins powered by a 3 hp drive.
OAD: 114"L x 25"W x 33"H
Get a Free Quote Call: 630-629-9900
Scott Mixer Powder Paddle Carbon RD25
- Manufacturer: Scott
- Model Number: RD25
- Frain Number: 5G5961
Scott Equipment Co, Model RD25, 25 cu ft, rotary drum batch mixer with number of lbs of product per hour – depending on materials and application. Vessel dimensions: 45" diameter x 73" long and has 4" high internal stationary mixing baffles with 15" OD product in feed and can be run both in forward or reverse with pneumatic clamp down, swing open access door, with 8" OD top product port and feed chute, 16" x 8" discharge port with 10" ground clearance. Mounted on heavy duty base frame with front trunnion wheel guarding. Powered by 5 Hp chain to motor drive.
OAD: 125" L x 62" W x 53" H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 1FT³
- Manufacturer: Patterson Kelley
- Model Number: 1FT³
- Frain Number: R27600
Patterson Kelly,1 ft³, 316 stainless steel, twin shell mixer. Rated to 50 lbs per ft³ and Ibs per hour – depending on materials and application. Equipped with (2) 11½" ID product ports with bolt down covers, (2) 16" long side V-Walls and (2) 7" long inner V-Walls. 5¾"ID butterly valve discharge with 36" ground clearance and powered by ¾ Hp drive. Requires 72" ceiling clearance with 20" swing radius / 40" swing diameter. Control panel, has start / e-stop push buttons and digital blend timer controller. Mounted on stainless steel base frame with casters.
OAD: 57" L x 56" W x 64" H
Get a Free Quote Call: 630-629-9900
Lodige USA Mixer Powder Plow FM130D
- Manufacturer: Lodige USA
- Model Number: FM130D
- Frain Number: 5G9682
Lodige, Model FM-130D,130 litre total drum volume with 35 to 90 litre (1.2 ft³ to 3.2 ft³) working capacity ploughshare batch powder mixer with pounds of product per hour – depending on materials and application. Has 304 stainless steel contact parts. Chamber dimensions of: 19½" ID x 26½" Long with 12" x 20½" flip up, bolt down cover. Equipped with (4) bolt on mixing plows mounted on 3" OD shaft powered by 5.3 Hp motor to belt drive with safety cover. 6¼" x 4¾" center bottom flush valve discharge chute with 31" ground clearance and push button controls. Mounted on heavy duty base frame.
OAD: 54" L x 40" W x 63" H
Get a Free Quote Call: 630-629-9900
Gemco Mixer Powder Double Cone 16 QT
- Manufacturer: Gemco
- Model Number: 16 QT
- Frain Number: 5G9553
Gemco, 16 quart working capacity, all stainless steel, double cone mixer with lbs of product per hour – depending on materials, application and machine configuration. Mixing chamber dimensions: 16" in Length; 14" in diameter; (2) 6" high cones and 4" straight wall; 19" distance from floor to center shaft. Equipped with (1) 3½" ID end product port with bolt down cover and 10½" table clearance, liquid solids bar and swing diameter of 18". Control panel has on / off switches for mixer and liquid solids bar. Mounted on stainless steel base frame.
OAD: 47"L x 17"W x 27"H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 10 FT³
- Manufacturer: Patterson Kelley
- Model Number: 10 FT³
- Frain Number: R27570
Patterson Kelly Model 10 ft³, 304 stainless steel, twin shell mixer. Rated to 135 lbs per ft³ and Ibs per hour – depending on materials, application and machine configuration. Equipped with (2) 17½" ID product ports with bolt down covers, (2) 44" long side V-Walls and (2) 15" long inner V-Walls. 8"ID butterly valve discharge with 12" ground clearance and powered by 3 Hp drive. Requires 78" ceiling clearance with 33" swing radius / 66" swing diameter. Mounted on painted base frame.
OAD: 91" L x 31" W x 65" H
Get a Free Quote Call: 630-629-9900
Patterson Kelley Mixer Powder Twin Shell 1 FT³
- Manufacturer: Patterson Kelley
- Model Number: 1 FT³
- Frain Number: R27560
Patterson Kelly, 1 ft³, stainless steel, twin shell mixer. Rated to 60 lbs per ft³ and Ibs per hour – depending on materials, application and machine configuration. Equipped with (2) 10" ID product ports with quick release pin covers, (2) 17" long side V-Walls and (2) 6" long inner V-Walls and liquid solids bar. Shell rotation powered by 1 hp motor drive and liquid solids bar powered by a 2 hp motor drive. 8½"OD / 6½"ID flanged discharge with 43" ground clearance. Requires 72" ceiling clearance with 15" swing radius / 30" swing diameter. Control panel, has start / e-stop and reset push buttons and run/jog control switch. Mounted on stainless steel base frame with casters and lexan guarding.
OAD: 53" L x 46" W x 68" H
Get a Free Quote Call: 630-629-9900