Mixer Powder Machines

Ross Mixer Powder Ribbon S. S. 42B-5

• Manufacturer: Ross
• Model Number: 42B-5
• Frain Number: R40000

Ross, Model RB42B-5, 7 ft³ total (5 ft³ workable), double ribbon mixer with amount of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 38" in Length; 17" in Width; 21" in Depth, with flip up clamp down cover, 2½" OD mixing shaft with 1" wide x 3/16" thick (outer) and 1¾" wide x 3/16" thick (inner) stainless steel ribbons powered by ½ Hp drive. 3" OD center bottom discharge has slide gate valve with 36" ground clearance.

OAD: 65"L x 30"W x 66"H

Patterson Kelley Mixer Powder Twin Shell 2 FT³

• Manufacturer: Patterson Kelley
• Model Number: 2 FT³
• Frain Number: R39991

Patterson Kelly, 2 ft³, 316 stainless steel, twin shell mixer. Rated to 62 lbs per ft³ with Ibs of product per hour – depending on materials and application. Equipped with (2) 12" ID product ports with bolt down covers, (2) 23" long side V-Walls and (2) 7" long inner V-Walls, shell powered by a 2 Hp drive, liquid solids bar capable powered by a 2 hp drive and has 6"ID butterly valve discharge with 35" ground clearance. Requires 114" ceiling clearance with 28" swing radius / 56" swing diameter. Has touch pad HMI.

OAD: 78"L x 57"W x 72"H

Gemco Mixer Powder Double Cone 2 FT³ SLANT

• Manufacturer: Gemco
• Model Number: 2 FT³ SLANT
• Frain Number: R39990

Gemco, Model Slant, 3.37 FT³ Total, (2 FT³ working capacity) 316 stainless steel double cone batch mixer with amount of product per hour – depending on materials and application. Vessel dimensions: 23" diameter, 8" straight wall, 6" deep top cone and 7" deep bottom cone. Equipped with 11" ID product port and bolt down cover and has 6" diameter butterfly valve discharge with 43" ground clearance. Shell powered by a 1 HP drive and agitation bar powered by a 2 HP drive. Mixer requires 74" ceiling clearance with 16" swing radius and 32" swing diameter. Control panel with push button start / stop controls and digital timers.

OAD: 76"L x 53"W x 74"H

Littleford Mixer Powder Plow FKM600D

• Manufacturer: Littleford
• Model Number: FKM600D
• Frain Number: R39970

Littleford, Model FKM600-D, 21.9 ft³ total capacity / 12.9 ft³ working capacity, 316 stainless steel jacketed plow mixer with pounds of product per hour – depending on materials and application. Interior chamber dimensions: 32" in Diameter x 48" in Length. Equipped with (5) plows powered by 20 Hp drive and (2) 5 Hp choppers, with side chamber safety interlocked access door. 15" ID center bottom discharge with 41" floor clearance. Mounted on (4) leg frame.

Top Access:
(1) 13" diameter with bolt down cover
(1) 6" diameter open vent

Jacket Access:
(4) 1½" NPT

OAD: 88"L x 60"W x 96"H

Paul O Abbe Mixer Powder Ribbon S. S. RB100

• Manufacturer: Paul O Abbe
• Model Number: RB100
• Frain Number: R39930

Paul O Abbe, Model RB100, 110 ft³ total (100 ft³ workable), double ribbon mixer with amount of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 93" in Length; 45" in Width; 49" in Depth. Equipped with flip up clamp down cover with a 50" x 30" manway with safety grate, heavy duty stainless steel ribbons powered by 30 Hp drive. Flush mount discharge valve with 14" x 19" flange and 8" ground clearance.

OAD: 145"L x 63"W x 80"H

Ross Mixer Powder Ribbon S. S. 42N-05S

• Manufacturer: Ross
• Model Number: 42N-05S
• Frain Number: R39910

Ross, Model 42N-05S, 7 ft³ total (5 ft³ workable), double ribbon mixer with amount of product per hour – depending on materials and application. 316 stainless steel contact parts. Inner mixing chamber dimensions of: 38" in Length; 17" in Width; 21" in Depth, with flip up cover, 2½" OD mixing shaft with 1" wide x ¼" thick (outer) and 1½" wide x 3/16" thick (inner) stainless steel ribbons powered by 5 Hp drive. 3" OD center bottom discharge has slide gate valve with 36" ground clearance.

OAD: 65"L x 34"W x 99"H

Littleford Mixer Powder Paddle S.S. FM100

• Manufacturer: Littleford
• Model Number: FM100
• Frain Number: R39890

Littleford, Model FM-100, 3.3 FT³ capacity (2.1 FT³ working capacity) 304 stainless steel mixer. Equipped with a 20" diameter x 26" long chamber, lift up / clamp down manway with 10½"OD x 7¾"ID flanged charge port, paddles powered by a 5 HP drive and flush mounted discharge valve with 10" diameter port with 36" ground clearance.

OAD: 67"L x 43"W x 88"H

Sprout Waldron / Andrtiz Mixer Powder Ribbon S. S. B-115

• Manufacturer: Sprout Waldron / Andrtiz
• Model Number: B-115
• Frain Number: 5J2750

Sprout Waldron, model B-115, 150 ft³, (115 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel construction. Inner mixing chamber dimensions of 143" in Length; 42" in Width; 48" in Depth. Equipped with top bolt down covers, 2" wide x ½" thick (outer) and 4" wide x ½" thick (inner) stainless steel ribbons. (1) 8"ID / 21"OD flanged discharge and (1) 9"ID / 19"OD flanged discharge. Ribbons powered by a 30 HP drive.

Top Access: (1) 16"W x 48"L lift off cover
(1) 8" ID flange
(1) 6" Dia Open Vent

OAD: 177"L x 64"W x 95"H

Forberg International AS Mixer Powder Paddle S.S. FZM-26

• Manufacturer: Forberg International AS
• Model Number: FZM-26
• Frain Number: 5J4100

Forberg, Model FZM-26, 38 ft³ (26 ft³ working capacity), 304 stainless steel dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs with inner dimensions of: 52" in Length; 61" in Width; 45" in Depth. Equipped with (4) 18" x 18" side manways, top safety grate, 10¼" wide x 9¼" high stainless steel paddles, 15 Hp motor drive and dual bottom trap door discharge gates with 53" ground clearance.

OAD: 81"L x 85"H x 114"H

Patterson Kelley Mixer Powder Twin Shell 3 FT³

• Manufacturer: Patterson Kelley
• Model Number: 3 FT³
• Frain Number: 5J4720

Patterson Kelley, Model 3 ft³, 304 stainless steel low pressure jacketed twin shell mixer. Equipped with (2) 16" ID product ports, 26" long outer V-Walls and 12" long inner V-Walls and 6"ID discharge with 37" ground clearance. Shell powered by a ¾ Hp motor drive. Requires 81" ceiling clearance with a 27" swing radius / 54" swing diameter. Mounted on painted base frame.

Jacket Access: (2) ¾" NPT

OAD: 83"L x 48"W x 70"H

Morcos Mixer Powder Ribbon S. S. RM1000

• Manufacturer: Morcos
• Model Number: RM1000
• Frain Number: R32173

Morcos Machinery Model RM1000, stainless steel, double ribbon mixer with pounds of product per hour – depending on materials and application. 304L stainless steel construction. Has Maximum bowl capacity of 1000 Litres, (35.31 ft³) with minimum mixing capacity of 441 litres (14.51 ft³) and maximum mixing capacity of 833 litres (29.41 ft³). Mixing chamber dimensions: 70" in Length; 34" in Width; 33" in Depth. Equipped with flip up / clamp down cover, with micro-switch safety switch and safety grate with seals for powdered products and 8" OD top product port. (2) levels of spirals, (1) internal anticlockwise and (1) external clockwise has 2" wide x (1/8)" thick (outer) and 2" wide x (1/8)" thick (inner) stainless steel ribbons (2) levels spirals, (1) internal anticlockwise and (1) external clockwise spiral.powered by 7.3 Hp motor drive. 10 OD center bottom pneumatic discharge gate with 24 ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.
Also granule product with crystal size ranging from 450 microns (17.71 mil.) till 650 microns (25.59 mil.).

OAD: 100" L x 34" W x 782" H

Morcos Mixer Powder Ribbon S. S. RM600M

• Manufacturer: Morcos
• Model Number: RM600M
• Frain Number: R36702

Morcos, Model RM600, 21 ft³, (17 ft³ working capacity), double ribbon mixer with pounds of product per hour – depending on materials and application. 316L stainless steel contact parts. Inner mixing chamber dimensions of 60" in Length; 24" in Width; 26" in Depth. Equipped with flip up cover, lift out safety screens, 2¼" OD motor shaft, 1¾" wide x ¼" thick (outer) and 1¾" wide x (¼)" thick (inner) stainless steel ribbons. 11" OD center bottom discharge with 50" floor clearence and 7.38 Hp motor. Mounted on stainless steel (4) leg frame with 35" wide x 121" long stainless steel platform set 57" off the ground with 36" high rails and a 6-step staircase.

OAD: 125"L x 102"W x 103"H