Tape Machines

Used Tape Equipment

Tape case erectors are designed to erect cases from pre-scored flat corrugated blanks and close and seal the bottom of the case with a strip of tape. Tape case erectors can either erect the cases with the case opening facing up vertically or with the case opening facing out horizontally. Tape case erectors are designed to use either two inch wide or three inch wide tape depending on the type of taping head that is mounted on the tape case erector.

Tape Equipment In Stock

OK International Case Erector Tape SUPERFORMER 2M

OK International, Model Superformer 2M, automatic case erector, bottom taper. Rated from 5 to 24 cases per minute – depending on materials and application. Case size range: 7.87" to 15.74" in Length; 5.9" to 13.77" in Width; 2.95" to 15.74" in Height. Equipped with 40" Long belt blank case magazine, reciprocating vacuum pic-n-place and squaring system, front and back flap closers, 48" long side gripper belt transfer conveyors, 3" bottom tape head with 14" maximum roll diameter, hand crank easy size change system, interlock safety guarding and status light bar. Control panel has start, stop, e-stop push buttons, alphanumeric display and step mode on / off switch. Mounted on base frame with casters.

OAD: 117" L x 68" W x 76" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape ABFT

  • Manufacturer: Wexxar
  • Model Number: ABFT
  • Frain Number: 5H5506

Wexxar Model ABFT, automatic, in line, case erector, bottom taper, Case size range: 8" to 22" in Length; 6" to 16" in Width; 4" to 19" in Height. Equipped with 48" long powered case magazine, pin and dome case erecting system, case pusher bar, dual side belt conveyors, minor & major bottom flap closers, 2" wide pressure sensitive bottom tape head and safety guarding. A/B controller with run, jog, on / off switches and start, stop, e-stop and status light bar. Mounted on locking casters. Speed dependant on materials, application and machine configuration.

OAD: 156" L x 45" W x 82" H

Get a Free Quote Call: 630-629-9900

Loveshaw Case Erector Tape CF40T

  • Manufacturer: Loveshaw
  • Model Number: CF40T
  • Frain Number: 5H5432

Loveshaw Model CF40, automatic case former and bottom taper rated from 5 to 20 casers per minute – depending on materials and application. Case size range: 7" to 24" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with blank case magazine, recipicating suction cup case erector and forming section, powered lug chain with side drive and 3" bottom tape head, with low hopper and low tape alarm and hand held controller. Mounted on heavy duty base frame with casters.

OAD: 132" L x 108" W x 80" H

Get a Free Quote Call: 630-629-9900

Lantech Case Erector Tape C2000

  • Manufacturer: Lantech
  • Model Number: C2000
  • Frain Number: 5H4070

Lantech, Model C-2000, automatic, case erector and bottom taper. Case size range: 8" to 25 5/8" in Length; 6" to 17" in Width; 4" to 23" in Depth. Equipped with 44" long blank magazine, suction cup case pick and place, 2" wide pressure sensitive tape head, and dual 32" long x 4" wide side belt asset conveyors. Control panel with AB controller and push button start / stop. Mounted on heavy duty base frame with locking casters. Rated from 5 to 15 cases per minute – depending on materials, application and machine configuration.

OAD: 103"L x 85"W x 80"H

Get a Free Quote Call: 630-629-9900

Fallas Case Erector Tape MCE

  • Manufacturer: Fallas
  • Model Number: MCE
  • Frain Number: 5C6432

Fallas Model MCE, automatic case erector and bottom taper capable of speeds FROM 5 to 20 Cases per minute – speeds depending on materials and application. case size range: (length) 6" – 22" (width) 6" – 16" (depth) 6" – 16". Has Allen-Bradley Micro-Logix 1000 PLC, photoeye in case hopper for low case level indication, 3M Accuglide II tape head. Has all S/S construction with Lexan interlock guarding. Manual crank adjustment to hopper guides for size changeovers. Has rail on discharge to upright cases as they exit machine. Last used in pasta operation; OAD: 14’L x 5’W x 6’H

{OAD: 168" L x 62" W x 93" H}

Get a Free Quote Call: 630-629-9900

Marq Case Erector Tape HPE315-4/RH/DL

  • Manufacturer: Marq
  • Model Number: HPE315-4/RH/DL
  • Frain Number: 5F4110

Marq Model HPE3154RH, automatic, case erector, bottom taper rated from 5 to 10 cases per minute – speeds depending on materials and application. Case size range: 6" to 27" in Length; 5.25" to 18.5" in Width; 3.5" to 18" in Height. Knockdown Range: 12" to 43" in Length; 10.5" to 33" in Width Equipped with a continuous feed magazine, top / bottom vacuum suction cup pick off, lugged chain case conveyor, minor and major flap closers, top squaring device, 3" tape head, PLC with touch pad controller, and safety guarding. Mounted on height adjustable legs and casters.

OAD: 91" L x 82" W x 72" H

Get a Free Quote Call: 630-629-9900

Wepackit Machinery Case Erector Tape 720XL

Wepackit, Model 720XL, automatic case erector, bottom taper rated from 1 to 14 cases per minute – depending on materials, application and machine configuration. Case size range: 6" to 17" in Length, 6 to 13" in Width; 3" to 13" in Depth, Maximum diagonal of case: 28". Maximum knockdown size: 34" x 27". Equipped with top mounted blank case magazine, vacuum suction cups pic n place, 46" long x 3" wide side case assist belts, major flap closers, 2" bottom tape head. A/B PLC controller with start / e-stop controls. Mounted on casters with leveling legs and status light.

OAD: 72"L x 48"W x 71"H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WFT

  • Manufacturer: Wexxar
  • Model Number: WFT
  • Frain Number: 5H4560

Wexxar, Model WFT, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials and application. Case size range: 6" to 24" in Length; 5" to 17" in Width; 3½" to 16½" in Height. Equipped with 72" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, case pusher bar, 2" tape head with 32" long dual side belt discharge section. hand crank height and width adjustable. Control panel has push button controls for jog, start, stop and e-stop and statis light bar. Mounted on (46) leg base frame with safety door guarding.

OAD: 180"L x 54"W x 95"H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA200IR

  • Manufacturer: Durable
  • Model Number: TGA200IR
  • Frain Number: 5H2945

Durable, Model TGA200IR, automatic, left to right case erector and bottom taper. Rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Depth. Equipped with 36" long blank magazine, suction cup case pick and place, 2" wide pressure sensitive tape head, and dual 58" long x 2½" wide side belt asset conveyors. Control panel with start, stop, e-stop controls. Mounted on (4) leg base frame.

OAD: 115" L x 84" W x 81" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WFT

  • Manufacturer: Wexxar
  • Model Number: WFT
  • Frain Number: 5G5414

Wexxar, Model WFT, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials and application. Case size range: 6" to 24" in Length; 5" to 17" in Width; 3½" to 16½" in Height. Equipped with 70" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" Dekka tape head with perpendicular tape roll and 32" long dual side belt discharge section. Control panel has A/B plc with push button controls for jog, start, stop and e-stop. Includes statis light bar and safety guarding. Mounted on (4) leg base frame with leveling legs.

OAD: 172" L x 54" W x 62" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WF2T

  • Manufacturer: Wexxar
  • Model Number: WF2T
  • Frain Number: 5G9929

Wexxar, Model WF-2T, automatic, inline case erector and bottom tape sealer. Rated from 5 to 25 cases per minute – depending materials and application. Case size range: 7" to 24" in Length; 5" to 17" in Width; 5" to 12" in Height. Equipped with 72" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" Dekka tape head and 32" long dual side belt discharge section. Control panel has A/B PLC with push button controls for jog, start, stop and e-stop. Includes statis light bar and safety guarding. Mounted on (4) leg base frame with leveling legs.

OAD: 130"L x 68"W x 84"H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA200IQCL

  • Manufacturer: Durable
  • Model Number: TGA200IQCL
  • Frain Number: 5H2944

Durable, Model TGA200IQCL, automatic, right to left case erector and bottom taper. Rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Depth. Equipped with 48" long blank magazine, suction cup case pick and place, 2" wide pressure sensitive tape head, and dual 58" long x 2½" wide side belt asset conveyors. Control panel with start, stop, e-stop controls. Mounted on (4) leg base frame.

OAD: 110" L x 110" W x 81" H

Get a Free Quote Call: 630-629-9900
1 2 3 8