Tape Machines

Used Tape Equipment

Tape case erectors are designed to erect cases from pre-scored flat corrugated blanks and close and seal the bottom of the case with a strip of tape. Tape case erectors can either erect the cases with the case opening facing up vertically or with the case opening facing out horizontally. Tape case erectors are designed to use either two inch wide or three inch wide tape depending on the type of taping head that is mounted on the tape case erector.

Tape Equipment In Stock

Durable Case Erector Tape TGA200IR

  • Manufacturer: Durable
  • Model Number: TGA200IR
  • Frain Number: 5H2945

Durable, Model TGA200IR, automatic, left to right case erector and bottom taper. Rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Depth. Equipped with 36" long blank magazine, suction cup case pick and place, 2" wide pressure sensitive tape head, and dual 58" long x 2½" wide side belt asset conveyors. Control panel with start, stop, e-stop controls. Mounted on (4) leg base frame.

OAD: 115" L x 84" W x 81" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WFT

  • Manufacturer: Wexxar
  • Model Number: WFT
  • Frain Number: 5G5414

Wexxar, Model WFT, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials and application. Case size range: 6" to 24" in Length; 5" to 17" in Width; 3½" to 16½" in Height. Equipped with 70" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" Dekka tape head with perpendicular tape roll and 32" long dual side belt discharge section. Control panel has A/B plc with push button controls for jog, start, stop and e-stop. Includes statis light bar and safety guarding. Mounted on (4) leg base frame with leveling legs.

OAD: 172" L x 54" W x 62" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape WF2T

  • Manufacturer: Wexxar
  • Model Number: WF2T
  • Frain Number: 5G9929

Wexxar, Model WF-2T, automatic, inline case erector and bottom tape sealer. Rated from 5 to 25 cases per minute – depending materials and application. Case size range: 7" to 24" in Length; 5" to 17" in Width; 5" to 12" in Height. Equipped with 72" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" Dekka tape head and 32" long dual side belt discharge section. Control panel has A/B PLC with push button controls for jog, start, stop and e-stop. Includes statis light bar and safety guarding. Mounted on (4) leg base frame with leveling legs.

OAD: 130"L x 68"W x 84"H

Get a Free Quote Call: 630-629-9900

Durable Case Erector Tape TGA200IQCL

  • Manufacturer: Durable
  • Model Number: TGA200IQCL
  • Frain Number: 5H2944

Durable, Model TGA200IQCL, automatic, right to left case erector and bottom taper. Rated from 5 to 20 cases per minute – depending on materials, application and machine configuration. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Depth. Equipped with 48" long blank magazine, suction cup case pick and place, 2" wide pressure sensitive tape head, and dual 58" long x 2½" wide side belt asset conveyors. Control panel with start, stop, e-stop controls. Mounted on (4) leg base frame.

OAD: 110" L x 110" W x 81" H

Get a Free Quote Call: 630-629-9900

Wexxar Case Erector Tape ABFT

  • Manufacturer: Wexxar
  • Model Number: ABFT
  • Frain Number: 5H2976

Wexxar, Model ABF-T, automatic, inline case erector and bottom tape sealer. Rated from 5 to 15 cases per minute – depending materials, application and machine configuration. Case size range: 8" to 22" in Length; 6" to 16" in Width; 4" to 19" in Height. Equipped with 48" long powered blank case magazine, recipicating pin and dome case forming plates, minor and major flap closers, hand crank height and width adjustable, case pusher bar, 2" tape head and 32" long dual side belt discharge section. Control panel has A/B PLC with push button controls for jog, start, stop and e-stop. Mounted on (4) leg base frame with leveling legs.

OAD: 146"L x 53"W x 90"H

Get a Free Quote Call: 630-629-9900

Bemis Case Erector Tape 1517

  • Manufacturer: Bemis
  • Model Number: 1517
  • Frain Number: 5G2050

Bemis Model 1517, automatic case erector, bottom taper rated from 4 to 12 cases per minute – depending on materials and application. Case size range: 7" to 24" in length, 5" to 16" in width; 4" to 24" RSC and 7" to 24" HSC in depth. Equipped with single head, pneumatic vacuum suction cups pic n place and feed belts for positive case control, blank case erector, walking stick case transport, minor and major flap closers, hand crank adjustable squaring device, 2" side mounted bottom sealing tape head with 12" maximum OD roll on 3" OD core, PLC controller with start and e-stop, controls. Mounted on base frame with safety guarding and leveling legs.

OAD: 102" L x 56" W x 72" H

Get a Free Quote Call: 630-629-9900

Pearson Case Erector Tape R23501

  • Manufacturer: Pearson
  • Model Number: R23501
  • Frain Number: 5H2941

Pearson, Model R23501, automatic, case erector and tape bottom sealer. Rated from 1 to 35 cases per minute – depending on materials, application and machine configuration. Case size range: 8¾" to 23½" in Length; 5" to 16" in Width, 8¼" to 21" in Depth. Equipped with 56" long x 18" wide (4) chain automatic blank case magazine, suction cup pic n place and case erecting squaring system, 75" long dual lugged chain conveyor, single top lugged chain with top hold down, top flap lifters and rear flap closers and plow and 3M Accuglide 2" tape sealer. Control panel has an AB controller with push button start / stop / jog. Mounted on heavy duty base frame with interlock safety guarding.

OAD: 206"L x 90"W x 94"H

Get a Free Quote Call: 630-629-9900

Pearson Case Erector Tape R23501

  • Manufacturer: Pearson
  • Model Number: R23501
  • Frain Number: 5H2940

Pearson, Model R23501, automatic, case erector and tape bottom sealer. Rated from 1 to 35 cases per minute – depending on materials, application and machine configuration. Case size range: 8¾" to 23½" in Length; 5" to 16" in Width, 8¼" to 21" in Depth. Equipped with 56" long x 18" wide (4) chain automatic blank case magazine, suction cup pic n place and case erecting squaring system, 75" long dual lugged chain conveyor, single top lugged chain with top hold down, top flap lifters and rear flap closers and plow and 3M Accuglide 2" tape sealer. Control panel has an AB controller with push button start / stop / jog. Mounted on heavy duty base frame with interlock safety guarding.

OAD: 206"L x 90"W x 94"H

Get a Free Quote Call: 630-629-9900

Lantech Case Erector Tape C300

  • Manufacturer: Lantech
  • Model Number: C300
  • Frain Number: 5H2643

Lantech, Model C300, automatic case erector, bottom sealer. Rated from 1 to 10 cases per minute – depending on materials, application and machine configuration. Case size range: 7(7/8)" to 19(5/8)" in Length; 5(7/8)" to 13¾" in Width; 5(7/8)" to 20¾" in Height. Equipped with 48" long case magazine, (8) suction cup case pick-in-place, dual 32" long x 4" wide side belt case assist conveyor belts with a 25" discharge height and 2" wide bottom tape head. Mounted on base frame with height adjustable legs.

OAD: 88"L x 84"W x 61"H

Get a Free Quote Call: 630-629-9900

Combi America Case Erector Tape CE-10

  • Manufacturer: Combi America
  • Model Number: CE-10
  • Frain Number: 5H2761

Combi America, Model CE-10, automatic case erector and bottom taper. Rated from 2 to 12 cases per minute – depending on materials, application and machine configuration. Case size range: 8" to 17½" in Length; 6" to 13½" in Width; 5" to 17½" in Height. Equipped with automatic (4) chain blank case magazine, recipricating vacuum suction cup pic-n-place, top squaring system, front and back flap closers and 2" bottom tape head. Control panel with an AB PLC. Push button start, stop, and e-stop, interlock cage style safety guarding and status light bar. Mounted on forklift base frame with casters.

OAD: 98"L x 73"W x 90"H

Get a Free Quote Call: 630-629-9900

Marq Case Erector Tape HPE215

  • Manufacturer: Marq
  • Model Number: HPE215
  • Frain Number: 5H2820

Marq Model HPE21510-RH/DL, automatic, case erector, bottom taper rated from 5 to 15 cases per minute – depending on materials, application and machine configuration. Case size range: 8" to 27" in Length; 5.25" to 17" in Width; 3.5" to 18" in Height. Equipped with continuous feed magazine, top vacuum suction cup pick off, and case erector, lugged chain case conveyor, minor and major flap closers, top arch squaring device and Dekka pressure sensitive 2" tape head. PLC controller has touch pad controls, with jog, hold, machine run and arch top hold down up and down, switches with start, e-stop push button controls and statis light bar. Mounted on height adjustable base frame.

OAD: 96" L x 82" W x 86" H

Get a Free Quote Call: 630-629-9900

OK International Case Erector Tape DURAFORMER2

Durable, Model Duraformer 2, case erector and bottom taper. Rated from 5 to 20 cases per minute – depending on materials, application and machine configuraion. Case size range: 7" to 20" in Length x 6" to 16" in Width x 4" to 16" in Height. Equipped with a 50" blank case magazine, Tri-Grip pneumatic erector arm, 2½" wide x 58" long dual side belt case conveyors with 26" discharge height and 2" tape head. Control panel has an AB controller with touch pad display, vacuum on / off switch and push button start / stop. Mounted on heavy duty base frame.

OAD: 111"L x 94"W x 60"H

Get a Free Quote Call: 630-629-9900